1、 IEC 60793-2-30 Edition 4.0 2015-06 INTERNATIONAL STANDARD Optical fibres Part 2-30: Product specifications Sectional specification for category A3 multimode fibres IEC 60793-2-30:2015-06(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights res
2、erved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. I
3、f you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 0
4、0 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical
5、 content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical informatio
6、n on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text,
7、 technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. E
8、lectropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) onli
9、ne. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Cus
10、tomer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60793-2-30 Edition 4.0 2015-06 INTERNATIONAL STANDARD Optical fibres Part 2-30: Product specifications Sectional
11、specification for category A3 multimode fibres INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.180.10 ISBN 978-2-8322-2772-5 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IE
12、C 60793-2-30:2015 IEC 2015 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references. 6 3 Specifications 7 3.1 General . 7 3.2 Dimensional requirements . 7 3.3 Mechanical requirements . 8 3.4 Transmission requirements 8 3.5 Environmental requirements 9 Annex A (normative) Specifications for sub-categor
13、y A3a multimode fibres . 10 A.1 General . 10 A.2 Dimensional requirements . 10 A.3 Mechanical requirements . 10 A.4 Transmission requirements 10 A.5 Environmental requirements 11 Annex B (normative) Specifications for sub-category A3b multimode fibres . 12 B.1 General . 12 B.2 Dimensional requiremen
14、ts . 12 B.3 Mechanical requirements . 12 B.4 Transmission requirements 12 B.5 Environmental requirements 13 Annex C (normative) Specifications for sub-category A3c multimode fibres . 14 C.1 General . 14 C.2 Dimensional requirements . 14 C.3 Mechanical requirements . 14 C.4 Transmission requirements
15、14 C.5 Environmental requirements 15 Annex D (normative) Specifications for sub-category A3d multimode fibres . 17 D.1 General . 17 D.2 Dimensional requirements . 17 D.3 Mechanical requirements . 17 D.4 Transmission requirements 17 D.5 Environmental requirements 18 Annex E (normative) Specifications
16、 for sub-category A3e multimode fibres . 20 E.1 General . 20 E.2 Dimensional requirements . 20 E.3 Mechanical requirements . 20 E.4 Transmission requirements 20 E.5 Environmental requirements 21 Annex F (normative) Specifications for sub-category A3f multimode fibres 23 F.1 General . 23 F.2 Dimensio
17、nal requirements . 23 F.3 Mechanical requirements . 23 F.4 Transmission requirements 23 F.5 Environmental requirements 24 Annex G (normative) Specifications for sub-category A3g multimode fibres . 26 IEC 60793-2-30:2015 IEC 2015 3 G.1 General . 26 G.2 Dimensional requirements . 26 G.3 Mechanical req
18、uirements . 26 G.4 Transmission requirements 26 G.5 Environmental requirements 27 Table 1 Relevant dimensional attributes and measurement methods . 7 Table 2 Dimensional requirements common to all category A3 fibres . 8 Table 3 Additional dimensional attributes required for each sub-category 8 Table
19、 4 Relevant mechanical attributes and test methods . 8 Table 5 Mechanical requirements to be specified for each sub-category 8 Table 6 Relevant transmission attributes and measurement methods 9 Table 7 Additional transmission attributes required for each sub-category . 9 Table 8 Relevant environment
20、al attributes and test methods . 9 Table A.1 Dimensional requirements specific to A3a fibres . 10 Table A.2 Mechanical requirements specific to A3a fibres . 10 Table A.3 Transmission requirements specific to A3a fibres 11 Table B.1 Dimensional requirements specific to A3b fibres . 12 Table B.2 Mecha
21、nical requirements specific to A3b fibres . 12 Table B.3 Transmission requirements specific to A3b fibres . 13 Table C.1 Dimensional requirements specific to A3c fibres . 14 Table C.2 Mechanical requirements specific to A3c fibres . 14 Table C.3 Transmission requirements specific to A3c fibres . 15
22、Table C.4 Environmental exposure tests . 15 Table C.5 Attributes measured . 16 Table D.1 Dimensional requirements specific to A3d fibres . 17 Table D.2 Mechanical requirements specific to A3d fibres . 17 Table D.3 Transmission requirements specific to A3d fibres 18 Table D.4 Environmental exposure t
23、ests . 18 Table D.5 Attributes measured . 19 Table E.1 Dimensional requirements specific to A3e fibres . 20 Table E.2 Mechanical requirements specific to A3e fibres . 20 Table E.3 Transmission requirements specific to A3e fibres 21 Table E.4 Environmental exposure tests . 21 Table E.5 Attributes mea
24、sured . 22 Table F.1 Dimensional requirements specific to A3f fibres 23 Table F.2 Mechanical requirements specific to A3f fibres 23 Table F.3 Transmission requirements specific to A3f fibres . 24 Table F.4 Environmental exposure tests . 24 Table F.5 Attributes measured . 25 Table G.1 Dimensional req
25、uirements specific to A3g fibres . 26 Table G.2 Mechanical requirements specific to A3g fibres . 26 Table G.3 Transmission requirements specific to A3g fibres 27 Table G.4 Environmental exposure tests 27 Table G.5 Attributes measured . 28 4 IEC 60793-2-30:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL
26、 COMMISSION _ OPTICAL FIBRES Part 2-30: Product specifications Sectional specification for category A3 multimode fibres FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Co
27、mmittees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Ava
28、ilable Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental
29、organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on techni
30、cal matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC
31、 National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniform
32、ity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IE
33、C itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure
34、that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any
35、nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the refere
36、nced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Interna
37、tional Standard IEC 60793-2-30 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. This fourth edition cancels and replaces the third edition published in 2012 and constitutes a technical revision. This edition includes the following significant tec
38、hnical changes with respect to the previous edition: specified test specimen length and measurement details for core diameter and NA ffmeasurements have been added. two new sub-categories have been added NA this replaced by NA ffIEC 60793-2-30:2015 IEC 2015 5 The text of this standard is based on th
39、e following documents: FDIS Report on voting 86A/1661/FDIS 86A/1662/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of a
40、ll parts of the IEC 60793 series can be found, under the general title Optical fibres, on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to
41、 the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains
42、 colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 IEC 60793-2-30:2015 IEC 2015 OPTICAL FIBRES Part 2-30: Product specifications Sectional specification for category A3 multimode fibres 1 Scop
43、e This part of IEC 60793-2 is applicable to sub-categories A3a, A3b, A3c, A3d, A3e, A3f and A3g. These fibres are used or can be incorporated in different information transmission equipment, other applications employing similar light transmitting techniques as well as fibre optic cables. Three types
44、 of requirements apply to these fibres: general requirements, as defined in IEC 60793-2; specific requirements common to the category A3 multimode fibres covered in this standard and which are given in Clause 3; particular requirements applicable to the individual sub-categories or specific applicat
45、ions (e.g. automotive or industrial applications), which are defined in the normative sub- category annexes. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edit
46、ion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-1-20, Optical fibres Part 1-20: Measurement methods and test procedures Fibre geometry IEC 60793-1-21, Optical fibres Part 1-21: Measurement methods and test procedu
47、res Coating geometry IEC 60793-1-22, Optical fibres Part 1-22: Measurement methods and test procedures Length measurement IEC 60793-1-30, Optical fibres Part 1-30: Measurement methods and test procedures Fibre proof test IEC 60793-1-31, Optical fibres Part 1-31: Measurement methods and test procedur
48、es Tensile strength IEC 60793-1-40, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation IEC 60793-1-41, Optical fibres Part 1-41: Measurement methods and test procedures Bandwidth IEC 60793-1-43, Optical fibres Part 1-43: Measurement methods and test procedures Numerical ap
49、erture IEC 60793-2-30:2015 IEC 2015 7 IEC 60793-1-46, Optical fibres Part 1-46: Measurement methods and test procedures Monitoring of changes in optical transmittance IEC 60793-1-50, Optical fibres Part 1-50: Measurement methods and test procedures Damp heat (steady state) tests IEC 60793-1-51, Optical fibres Part 1-51: Measurement methods and test procedures Dry heat (steady
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1