IEC 60793-2-70-2017 Optical fibres - Part 2-70 Product specifications - Sectional specification for polarization- maintaining fibres《光纤 第2-70部分 产品规格 保偏光纤分规格.》.pdf

1、 IEC 60793-2-70 Edition 1.0 2017-02 INTERNATIONAL STANDARD Optical fibres Part 2-70: Product specifications Sectional specification for polarization- maintaining fibres IEC 60793-2-70:2017-02(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights

2、 reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requeste

3、r. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919

4、03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The techn

5、ical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical inform

6、ation on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, t

7、ext, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by emai

8、l. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IE

9、C Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Ce

10、ntre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60793-2-70 Edition 1.0 2017-02 INTERNATIONAL STANDARD Optical fibres Part 2-70: Product specifications Sectional specification fo

11、r polarization- maintaining fibres INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.180.10 ISBN 978-2-8322-3866-0 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 60793-2-70

12、2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 4 Specifications 7 4.1 General . 7 4.2 Dimensional requirements . 7 4.3 Mechanical requirement 8 4.4 Transmission requirements . 8 4.5 Environmental requirements . 9 Annex A (normative) Family specifica

13、tion for category D1 polarization-maintaining fibres 10 General . 10 A.1Dimensional requirements . 10 A.2Mechanical requirement 10 A.3Transmission requirements . 10 A.4Environmental requirements . 11 A.5 Annex B (normative) Family specification for category D2 polarization-maintaining fibres 12 Gene

14、ral . 12 B.1Dimensional requirements . 12 B.2Mechanical requirement 12 B.3Transmission requirements . 12 B.4Environmental requirements . 13 B.5 Annex C (normative) Family specification for category D3 polarization- maintaining fibres 14 General . 14 C.1Dimensional requirements . 14 C.2Mechanical req

15、uirement 14 C.3Transmission requirements . 14 C.4Environmental requirements . 15 C.5 Annex D (normative) Mode field diameter (MFD) measurement of PM fibre 16 Annex E (informative) Cut-off wavelength of PM fibre and SM fibre 17 Bibliography 19 Figure E.1 Cut-off wavelength profiles of PM fibre and SM

16、 fibre 17 Figure E.2 Cut-off wavelength profile of PM fibre with extra bending . 18 Table 1 Categories of glass core/glass clad polarization-maintaining fibres 6 Table 2 Dimensional attributes and measurement methods 8 Table 3 Mechanical attribute and test method 8 Table 4 Transmission attributes an

17、d measurement methods 9 Table 5 Environmental exposure tests . 9 Table 6 Attributes measured 9 Table A.1 Dimensional requirements specific to D1 fibres 10 IEC 60793-2-70:2017 IEC 2017 3 Table A.2 Mechanical requirement specific to D1 fibres . 10 Table A.3 Transmission requirements specific to D1 fib

18、res 11 Table A.4 Environmental requirements specific to D1 fibres . 11 Table B.1 Dimensional requirements specific to D2 fibres 12 Table B.2 Mechanical requirement specific to D2 fibres . 12 Table B.3 Transmission requirements specific to D2 fibres 13 Table B.4 Environmental requirements specific to

19、 D2 fibres . 13 Table C.1 Dimensional requirements specific to D3 fibres 14 Table C.2 Mechanical requirement specific to D3 fibres . 14 Table C.3 Transmission requirements specific to D3 fibres 15 Table C.4 Environmental requirements specific to D3 fibres . 15 4 IEC 60793-2-70:2017 IEC 2017 INTERNAT

20、IONAL ELECTROTECHNICAL COMMISSION _ OPTICAL FIBRES Part 2-70: Product specifications Sectional specification for polarization-maintaining fibres FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical co

21、mmittees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Techni

22、cal Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, government

23、al and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or ag

24、reements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international us

25、e and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to prom

26、ote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indic

27、ated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6)

28、 All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damag

29、e or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publi

30、cation. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all su

31、ch patent rights. International Standard IEC 60793-2-70 has been prepared by subcommittee 86A: Fibres and cables, of IEC technical committee 86: Fibre optics. The text of this International Standard is based on the following documents: CDV Report on voting 86A/1741/CDV 86A/1780/RVC Full information

32、on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60793 series, published under the general title Optical fi

33、bres, can be found on the IEC website. IEC 60793-2-70:2017 IEC 2017 5 The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the

34、 document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for

35、the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 IEC 60793-2-70:2017 IEC 2017 OPTICAL FIBRES Part 2-70: Product specifications Sectional specification for polarization-maintaining fibres 1 Scope This part of IEC 60793 is applicable to op

36、tical fibre types D1, D2, D3, as described in Table 1. These fibres are polarization-maintaining fibre types, and are used or can be incorporated in information transmission equipment and optical fibre cable. These fibres are available for use in optical transport networks. Three types of requiremen

37、ts apply to these fibres: general requirements defined in IEC 60793-2; specific requirements common to the category D polarization-maintaining fibres covered in this document and which are given in Clause 4; particular requirements applicable to individual fibre types or specific applications, which

38、 are defined in Annexes A to C. Table 1 Categories of glass core/glass clad polarization-maintaining fibres Category Type Description D1 Polarization-maintaining fibre suitable for use at 980 nm This category of polarization-maintaining fibre is optimised for polarization-maintaining ability in the

39、980 nm region. This fibre is used for erbium-doped fibre amplifier. D2 Polarization-maintaining fibre suitable for use at 1 310 nm This category of polarization-maintaining fibre is optimised for polarization-maintaining ability and connection property of category B fibres in the 1 310 nm region. D3

40、 Polarization-maintaining fibre suitable for use at 1 550 nm This category of polarization-maintaining fibre is optimised for polarization-maintaining ability and connection property of category B fibres in the 1 550 nm region. 2 Normative references The following documents are referred to in the te

41、xt in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-1-20:2014, Optical fibres Part 1-20:

42、 Measurement methods and test procedures Fibre geometry IEC 60793-1-21, Optical fibres Part 1-21: Measurement methods and test procedures Coating geometry IEC 60793-1-22, Optical fibres Part 1-22: Measurement methods and test procedures Length measurement IEC 60793-1-30, Optical fibres Part 1-30: Me

43、asurement methods and test procedures Fibre proof test IEC 60793-1-40, Optical fibres Part 1-40: Measurement methods and test procedures Attenuation IEC 60793-2-70:2017 IEC 2017 7 IEC 60793-1-44:2011, Optical fibres Part 1-44: Measurement methods and test procedures Cut-off wavelength IEC 60793-1-45

44、2001, Optical fibres Part 1-45: Measurement methods and test procedures Mode field diameter IEC 60793-1-46, Optical fibres Part 1-46: Measurement methods and test procedures Monitoring of changes in optical transmittance IEC 60793-1-52, Optical fibres Part 1-52: Measurement methods and test procedu

45、res Change of temperature tests IEC 60793-1-60 1 , Optical fibres Part 1-60: Measurement methods and test procedures Beat length IEC 60793-1-61 2 , Optical fibres Part 1-61: Measurement methods and test procedures Polarization crosstalk IEC 60793-2, Optical fibres Part 2: Product specifications Gene

46、ral 3 Terms and definitions No terms and definitions are listed in this document. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.o

47、rg/obp 4 Specifications 4.1 General The fibre shall consist of a glass core and glass cladding in accordance with the construction of optical fibre category D polarization-maintaining fibre as given in IEC 60793-2. The term “glass“ usually refers to material consisting of non-metallic oxides. 4.2 Di

48、mensional requirements Relevant dimensional attributes and measurement methods are given in Table 2. _ 1Under preparation. Stage at the time of publication: IEC 60793-1-60:2017. 2Under preparation. Stage at the time of publication: IEC 60793-1-61:2017. 8 IEC 60793-2-70:2017 IEC 2017 Table 2 Dimensio

49、nal attributes and measurement methods Attributes Measurement methods Cladding diameter aIEC 60793-1-20 Cladding non-circularity aIEC 60793-1-20 Core-cladding concentricity error aIEC 60793-1-20 Primary coating diameter IEC 60793-1-21 Primary coating-cladding concentricity error IEC 60793-1-21 Fibre length IEC 60793-1-22 aThe dimensional characteristics of polarization-maintaining (P