IEC 60809 AMD 1-2017 Lamps for road vehicles - Dimensional electrical and luminous requirements Amendment 1《道路车辆用灯.尺寸、电气和照明要求.修改件1》.pdf

1、 IEC 60809 Edition 3.0 2017-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Lamps for road vehicles Dimensional, electrical and luminous requirements Lampes pour vhicules routiers Exigences dimensionnelles, lectriques et lumineuses IEC 60809:2014-12/AMD1:2017-03(en-fr) AMENDMENT 1 AMENDEMENT 1 THIS P

2、UBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writ

3、ing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further info

4、rmation. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit nationa

5、l de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3

6、, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies.

7、About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting t

8、he entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety

9、of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available onli

10、ne and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechn

11、ical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 an

12、d CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mond

13、iale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corri

14、gendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, table

15、ttes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. I

16、EC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectr

17、oniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectro

18、techniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires

19、 sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60809 Edition 3.0 2017-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Lamps for road vehicles Dimensional, electrical and luminous requirements Lampes pour vhicules routiers Exigences dimensionnelles, lectriques et l

20、umineuses INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.140.20; 43.040.20 ISBN 978-2-8322-4138-7 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that y

21、ou obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. AMENDMENT 1 AMENDEMENT 1 2 IEC 60809:2014/AMD1:2017 IEC 2017 FOREWORD This amendment has been prepared by subcommittee 34A: Lamps, of IEC tech

22、nical committee 34: Lamps and related equipment. The text of this amendment is based on the following documents: CDV Report on voting 34A/1901/CDV 34A/1940/RVC Full information on the voting for the approval of this amendment can be found in the report on voting indicated in the above table. The com

23、mittee has decided that the contents of this amendment and the base publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, rep

24、laced by a revised edition, or amended. _ 4.4.1 Colour of light Add, after the third dashed list item (definition of red colour), the following new text: finished filament lamps emitting amber light: A 12green boundary: y = x 0,120 A 23the spectral locus 2A 34red boundary: y = 0,390 A 41white bounda

25、ry: y = 0,790 0,670 x With intersection points: A 1 : x = 0,545, y = 0,425 A 2 : x = 0,560, y = 0,440 A 3 : x = 0,609, y = 0,390 A 4 : x = 0,597, y = 0,390 Annex E Replace the existing title with the following new title: IEC 60809:2014/AMD1:2017 3 IEC 2017 Method of measuring internal elements of H4

26、, H17, H19 and HS1 lamps E.2.6 Plane Y1-Y1 Replace the existing paragraph with the following new text: Plane Y1-Y1 is a plane parallel to the reference plane at a distance of 29,5 mm from it (30,0 mm for the 24 V type, 30,5 mm for category H19). E.2.8 Plane Y3-Y3 Replace the existing paragraph with

27、the following new text: Plane Y3-Y3 is a plane parallel to the reference plane at a distance of 23,5 mm from it (25,0 mm for categories HS1 and H17, 24,5 mm for category H19). E.3 Viewing directions (see Figure E.1) Add, at the end of Clause E.3, the following new sub-clause: E.3.4 Viewing direction

28、 Viewing direction is perpendicular to plane V-V, seen from the side of the right-hand shield edge. E.4.1 Shield and filaments (see Figure E.2) Replace the existing text with the following new text: Viewing direction MP 1 and MP 2 The intersections of the main beam filament axis with planes Y3-Y3 an

29、d Y4-Y4 MP 3 and MP 4 The intersections of the shield edge with planes Y1-Y1 and Y2-Y2 MP 5 and MP 6 The intersections of the envelope of the dipped beam filament with planes Y1-Y1 and Y2-Y2 farthest from plane H-H MP 7 The intersection of the bulb axis with plane Y1-Y1 MP 8 and MP 11 The intersecti

30、ons of the outer part of respectively the first and last luminous turns of the dipped beam filament with the shield edge MP 9 and MP 10 The intersections of the outer part of respectively the first and last luminous turns of the main beam filament with the centre line (axis) of that filament Viewing

31、 direction MP 12 and MP 13 The intersections of the main beam filament axis with planes Y3-Y3 and Y4-Y4 MP 14 and MP 15 The intersections of the dipped beam filament axis with planes Y1-Y1 and Y2-Y2 MP 16 and MP 17 The intersections of the interior shield edges with plane Y2-Y2 4 IEC 60809:2014/AMD1

32、:2017 IEC 2017 MP 24 and MP 25 The intersections of the outer shield edges with plane Y2-Y2 (including shield material thickness; applies to category H19 only) Viewing direction (Categories H4 and HS1. Can be used as an equivalent alternative to viewing direction for categories H17 or H19) MP 18 and

33、 MP 19 The intersections of the shield edge with plane Y1-Y1 and Y2-Y2 Viewing direction (Categories H17 and H19. Not for category H4 nor HS1) MP 18 and MP 19 The intersections of the shield edge with plane Y1-Y1 and Y2-Y2 E.5 Dimensions to be measured Replace the existing paragraph with the followi

34、ng new text: Table E.1 states the dimensions to be measured. Values and tolerances are given on the relevant filament lamp data sheet H4, H17, H19 or HS1 of UN Regulation 37. IEC 60809:2014/AMD1:2017 5 IEC 2017 Replace the existing Table E1 with the following new Table E.1 Table E.1 Dimensions to be

35、 measured for H4, H17, H19 and HS1 lamps Distance (see Figure E.2) Measured perpendicular to plane Viewing direction Dimension 12 V 24 V MP 2 to MP 3 H-H 1 a/26,0 MP 1 to MP 3 aH-H 1 a/23,5 MP 3 to H-H dH-H 1 b 1 /29,5 b 1 /30,0 MP 4 to H-H bH-H 1 b /33,0 MP 18 to X-X c,dX-X 3 b 2 /29,5 b 2 /30,0 4

36、MP 19 to X-X cX-X 3 b /33,0 4 MP 3 to MP 5 dH-H 1 c/29,5 c/30,0 MP 4 to MP 6 bH-H 1 c/33,0 MP 7 to MP 3 H-H 1 d MP 8 to reference plane Reference plane 1 e MP 8 to MP 9 Reference plane 1 f MP 13 to V-V V-V 2 g/26,0 MP 12 to V-V aV-V 2 g/23,5 MP 14 to V-V dV-V 2 h/29,5 h/30,0 MP 15 to V-V V-V 2 h/33,

37、0 MP 9 to MP 10 Reference plane 1 l rMP 8 to MP 11 Reference plane 1 l cMP 16 to V-V bV-V 2 p/33,0 MP 17 to V-V bV-V 2 q/33,0 Angle (see Figure E.3) MP 23 to MP 20 H-H 1 MP 23 to MP 21 V-V 2 MP 23 to MP 22 V-V 2 MP 24 to MP 25 V-V 2 B/33,0 aFor category HS1, this dimension shall be measured at 25,0

38、mm distance from the reference plane. For category H19, this dimension shall be measured at 24,5 mm distance from the reference plane. bFor category HS1, this dimension shall be measured at 31,0 mm distance from the reference plane. cFor categories H17 and H19, viewing direction is an alternative to

39、 viewing direction , but values and tolerances shall comply with those defined for viewing direction in UN Regulation 37. dFor category H19, this dimension shall be measured at 30,5 mm distance from the reference plane. 6 IEC 60809:2014/AMD1:2017 IEC 2017 Replace the existing Figure E.1 with the fol

40、lowing new Figure E.1: Figure E.1 Viewing directions, seen from the top of the lamp IEC 1 2 4 3 90 180 0 H H V X X 195 Reference axis Shield V IEC 60809:2014/AMD1:2017 7 IEC 2017 Replace the existing Figure E.2 with the following new Figure E.2: Figure E.2 Position of measuring points of H4, H17, H1

41、9 and HS1 lamps _ IEC Bulb axis 2 1 3 V V X X H H Shield Reference axis MP 7 Viewing direction MP 1,2,3,4,5,6,7,8,9,10,11 2 Viewing direction MP 12,13,14,15,16,17 3 Viewing direction MP 18,19 Y3 Y4 Y1 Y2 MP 6 MP 4 MP 11 MP 5 MP 3 MP 8 Reference plane View from H H + MP 10 MP 1 MP 2 MP 9 MP 14 MP 16/

42、MP 24 MP 15 MP 13 View from V V + MP 12 MP 17/MP 25 View from 1 2 3 4 / MP 18 MP 19 X X + Y3 Y4 Y1 Y2 Reference plane 1 8 IEC 60809:2014/AMD1:2017 IEC 2017 AVANT-PROPOS Le prsent amendement a t tabli par le sous-comit 34A: Lampes, du comit dtudes 34 de lIEC: Lampes et quipements associs. Le texte de

43、 cet amendement est issu des documents suivants: CDV Rapport de vote 34A/1901/CDV 34A/1940/RVC Le rapport de vote indiqu dans le tableau ci-dessus donne toute information sur le vote ayant abouti lapprobation de cet amendement. Le comit a dcid que le contenu de cet amendement et de la publication de

44、 base ne sera pas modifi avant la date de stabilit indique sur le site web de lIEC sous “http:/webstore.iec.ch“ dans les donnes relatives la publication recherche. cette date, la publication sera reconduite, supprime, remplace par une dition rvise, ou amende. _ 4.4.1 Couleur de la lumire Ajouter, ap

45、rs le troisime tiret (dfinition de la lumire rouge), le nouveau texte suivant: lampes filament finies mettant une lumire jaune-auto: A 12frontire verte: y = x 0,120 A 23le lieu spectral 2A 34frontire rouge: y = 0,390 A 41frontire blanche: y = 0,790 0,670 x Avec les points dintersection A 1 : x = 0,5

46、45, y = 0,425 A 2 : x = 0,560, y = 0,440 A 3 : x = 0,609, y = 0,390 A 4 : x = 0,597, y = 0,390 Annexe E Remplacer le titre existant par le nouveau titre suivant: IEC 60809:2014/AMD1:2017 9 IEC 2017 Mthode de mesure des lments internes des lampes H4, H17, H19 et HS1 E.2.6 Plan Y1-Y1 Remplacer lalina

47、existant par le nouveau texte suivant: Le plan Y1-Y1 est un plan parallle au plan de rfrence une distance de 29,5 mm de celui- ci (30,0 mm pour le type 24 V, 30,5 mm pour la catgorie H19). E.2.8 Plan Y3-Y3 Remplacer lalina existant par le nouveau texte suivant: Le plan Y3-Y3 est un plan parallle au

48、plan de rfrence une distance de 23,5 mm de celui- ci (25,0 mm pour les catgories HS1 et H17, 24,5 mm pour la catgorie H19). E.3 Axes de vise (voir la Figure E.1) Ajouter, la fin de lArticle E.3, le nouveau paragraphe suivant: E.3.4 Axe de vise Laxe de vise est perpendiculaire au plan V-V, vu depuis le ct du bord du blindage droite. E.4.1 Blindage et filaments (voir la Figure E.2) Remplacer le texte existant par le nouveau texte suivant: Axe de vise MP 1 et MP 2 Les intersections entre laxe du filament du faisceau principal et les plans Y3-Y3 et Y4-Y4 MP 3 e