IEC 60811-402-2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 402 Miscellaneous tests - Water absorption tests《电缆和光缆.非金属材料试验方法.第402部分 各类试验.吸水试验》.pdf

1、 IEC 60811-402 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materials Part 402: Miscellaneous tests Water absorption tests Cbles lectriques et fibres optiques Mthodes dessai pour les matriaux non-mtalliques Partie 402

2、: Essais divers Essais dabsorption deau IEC60811-402:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,

3、including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address be

4、low or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie

5、et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CE

6、I de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Internati

7、onal Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links:

8、IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublis

9、hed Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and d

10、efinitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contac

11、t the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publica

12、tions CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouve

13、r des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just

14、Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais,

15、 ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch

16、. IEC 60811-402 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materials Part 402: Miscellaneous tests Water absorption tests Cbles lectriques et fibres optiques Mthodes dessai pour les matriaux non-mtalliques Partie 40

17、2: Essais divers Essais dabsorption deau INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE K ICS 29.035.01; 29.060.20 PRICE CODE CODE PRIX ISBN 978-2-88912-962-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Ele

18、ctrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60811-402 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative refe

19、rences . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Pre-conditioning 6 4.3 Electrical water absorption test 6 4.3.1 Apparatus 6 4.3.2 Preparation of test pieces 7 4.3.3 Test procedure 7 4.3.4 Evaluation of results 7 4.4 Gravimetric water absorption test 7 4.4.1 Preparation o

20、f test piece 7 4.4.2 Testing procedure 8 4.4.3 Expression of results . 9 5 Test report 9 Bibliography 10 Table 1 d.c. test voltages . 7 60811-402 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 402: Miscellaneous t

21、ests Water absorption tests FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions conce

22、rning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Thei

23、r preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates cl

24、osely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the rele

25、vant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the

26、technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum

27、 extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies pro

28、vide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or

29、 its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expens

30、es arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attent

31、ion is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60811-402 has been prepared by IEC technical committee 20: Electric cable

32、s. This Part 402 of IEC 60811 cancels and replaces Clause 9 of IEC 60811-1-3:1993, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012

33、. 4 60811-402 IEC:2012 The text of this standard is based on the following documents: FDIS Report on voting 20/1286/FDIS 20/1335/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted i

34、n accordance with the ISO/IEC Directives, Part 2. This part of IEC 60811 shall be used in conjunction with IEC 60811-100. A list of all the parts in the IEC 60811 series, published under the general title Electric and optical fibre cables Test methods for non-metallic materials, can be found on the

35、IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, repla

36、ced by a revised edition, or amended. 60811-402 IEC:2012 5 INTRODUCTION The IEC 60811 series specifies the test methods to be used for testing non-metallic materials of all types of cables. These test methods are intended to be referenced in standards for cable construction and for cable materials.

37、NOTE 1 Non-metallic materials are typically used for insulating, sheathing, bedding, filling or taping within cables. NOTE 2 These test methods are accepted as basic and fundamental and have been developed and used over many years principally for the materials in all energy cables. They have also be

38、en widely accepted and used for other cables, in particular optical fibre cables, communication and control cables and cables for ships and offshore applications. 6 60811-402 IEC:2012 ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 402: Miscellaneous tests Water absorp

39、tion tests 1 Scope This Part 402 of IEC 60811 describes water absorption tests which typically apply to cross-linked and thermoplastic compounds used for insulating and sheathing materials. 2 Normative references The following documents, in whole or in part, are normatively referenced in this docume

40、nt and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60811-100:2012, Electric and optical fibre cables Test methods for non-metallic materials

41、Part 100: General 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60811-100 apply. 4 Test method 4.1 General This part of IEC 60811 shall be used in conjunction with IEC 60811-100. Unless otherwise specified, tests shall be carried out at room temper

42、ature. 4.2 Pre-conditioning All the tests shall be carried out not less than 16 h after the extrusion or cross-linking, if any, of the insulating or sheathing compounds. If the test is carried out at room temperature, the test pieces shall be kept for at least 3 h at a temperature of (23 5) C. 4.3 E

43、lectrical water absorption test 4.3.1 Apparatus The following apparatus shall be used: a) a.c and d.c voltage sources; b) voltmeter; c) water bath with heating equipment. 60811-402 IEC:2012 7 4.3.2 Preparation of test pieces The cores to be tested shall be removed from a sample of finished cable app

44、roximately 3 m long. Care shall be taken to avoid damage to the insulation during removal of the cores. 4.3.3 Test procedure a) Pre-test The cores shall be immersed in a water bath in which the water has been heated to the temperature specified in the standard for the type of cable. The ends of the

45、cores shall protrude sufficiently above the water level to prevent damage due to leakage current along the surface of the cores when the required voltage is applied between the conductors and the water. After the cores have been immersed in the water for 1 h, an a.c. voltage of 4 kV shall be applied

46、 between the conductors and the water for 5 min. If any sample of core breaks down, it shall be removed from the water bath and not used in the main test specified in item b) below. However, the test shall be repeated not more than twice, by taking another sample of the same core, which shall be sub

47、jected to the same pre-test. The object of the pre-test is to ensure that only undamaged cores are used for the main test. b) Main test Cores which are satisfactory on the pre-test shall remain in the water bath with the water still maintained at the temperature specified in the relevant standard. A

48、 d.c. voltage in accordance with Table 1 below shall be applied between the conductors and the water for the time specified in the standard for the type of cable, the negative pole being connected to the conductor of each test piece. Table 1 DC test voltages Thickness, t, of insulation specified Mea

49、n value mm DC voltage V 0,8 and 0,9 1,0 and 1,2 1,2 t 1,6 1,6 t 2,0 2,0 t 800 1 000 1 400 2 000 2 500 4.3.4 Evaluation of results No breakdown shall occur. 4.4 Gravimetric water absorption test 4.4.1 Preparation of test piece a) For cables with conductors of nominal cross-sectional area equal to or less than 25 mm2and rated voltage up to and including 0,6/1 kV: Each test piece shall be a piece of