IEC 60811-606-2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 606 Physical tests - Methods for determining the density《电缆和光缆.非金属材料试验方法.第606部分 物理试验.密度测定方法》.pdf

1、 IEC 60811-606 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materials Part 606: Physical tests Methods for determining the density Cbles lectriques et fibres optiques Mthodes dessai pour les matriaux non-mtalliques Pa

2、rtie 606: Essais physiques Mthodes de dtermination de la masse volumique IEC60811-606:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any

3、means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publicati

4、on, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou m

5、canique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou con

6、tactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that

7、 prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might ha

8、ve been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Publi

9、shed - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms contai

10、ning more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need

11、further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies

12、 apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La reche

13、rche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvel

14、les publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfi

15、nitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des qu

16、estions contactez-nous: csciec.ch. IEC 60811-606 Edition 1.0 2012-03 INTERNATIONAL STANDARD NORME INTERNATIONALE Electric and optical fibre cables Test methods for non-metallic materials Part 606: Physical tests Methods for determining the density Cbles lectriques et fibres optiques Mthodes dessai p

17、our les matriaux non-mtalliques Partie 606: Essais physiques Mthodes de dtermination de la masse volumique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE K ICS 29.035.01; 29.060.20 PRICE CODE CODE PRIX ISBN 978-2-88912-999-7 Registered trademark of the Internati

18、onal Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 60811-606 IEC:2012 C

19、ONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Suspension method (general method) . 6 4.2.1 Testing materials and equipment . 6 4.2.2 Procedure 7 4.3 Pycnometer method (reference method) 7 4.3.1 Testing e

20、quipment . 7 4.3.2 Sample and test piece preparation 7 4.3.3 Conditioning 7 4.3.4 Procedure 7 4.3.5 Calculation 8 4.4 Apparent mass method 8 4.4.1 Testing equipment . 8 4.4.2 Sampling and preparation of test pieces 8 4.4.3 Conditioning 8 4.4.4 Procedure 8 4.4.5 Calculation 8 4.5 Correction for fille

21、d polyethylene (PE) . 9 5 Test report 9 Bibliography 10 60811-606 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 606: Physical tests Methods for determining the density FOREWORD 1) The International Electrotechnic

22、al Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this e

23、nd and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Com

24、mittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in a

25、ccordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all

26、 interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held re

27、sponsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any diverg

28、ence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC ma

29、rks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual exper

30、ts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Pu

31、blication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Pu

32、blication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60811-606 has been prepared by IEC technical committee 20: Electric cables. This Part 606 of IEC 60811 cancels and replaces Clause 8 of IEC 60811

33、-1-3:1993, which is withdrawn. Full details of the replacements are shown in Annex A of IEC 60811-100:2012. There are no specific technical changes with respect to the previous edition, but see the Foreword to IEC 60811-100:2012. 4 60811-606 IEC:2012 The text of this standard is based on the followi

34、ng documents: FDIS Report on voting 20/1315/FDIS 20/1364/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This part of IEC 60811

35、 shall be used in conjunction with IEC 60811-100. A list of all the parts in the IEC 60811 series, published under the general title Electric and optical fibre cables Test methods for non-metallic materials, can be found on the IEC website. The committee has decided that the contents of this publica

36、tion will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 60811-606 IEC:2012 5 INTRODUCTION

37、The IEC 60811 series specifies the test methods to be used for testing non-metallic materials of all types of cables. These test methods are intended to be referenced in standards for cable construction and for cable materials. NOTE 1 Non-metallic materials are typically used for insulating, sheathi

38、ng, bedding, filling or taping within cables. NOTE 2 These test methods are accepted as basic and fundamental and have been developed and used over many years principally for the materials in all energy cables. They have also been widely accepted and used for other cables, in particular optical fibr

39、e cables, communication and control cables and cables for ships and offshore applications. 6 60811-606 IEC:2012 ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 606: Physical tests Methods for determining the density 1 Scope This Part 606 of IEC 60811 descries the metho

40、ds for determining the density for the most common types of insulating and sheathing compounds (cross-linked, PVC, PE, PP, etc.). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refe

41、rences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60811-100:2012, Electric and optical fibre cables Test methods for non-metallic materials Part 100: General 3 Terms and definitions For the purposes o

42、f this document, the terms and definitions given in IEC 60811-100 apply. 4 Test method 4.1 General This part of IEC 60811 shall be used in conjunction with IEC 60811-100. Unless otherwise specified, tests shall be carried out at room temperature. 4.2 Suspension method (general method) 4.2.1 Testing

43、materials and equipment These shall comprise: a) ethanol (ethyl-alcohol) of analytical grade or another suitable liquid for densities below 1 g/ml; b) zinc chloride solution for densities equal to or greater than 1 g/ml; c) distilled or deionized water; d) mixing cylinder; e) thermostat; f) hydromet

44、er calibrated at (23,0 0,1) C; g) thermometer graduated in tenths of a degree Celsius. 60811-606 IEC:2012 7 4.2.2 Procedure From the insulation or the sheath to be tested, a sample shall be taken perpendicularly to the conductor axis and cut into small pieces of 1 mm to 2 mm edge length. The density

45、 shall be determined by putting the sample in suspension in a liquid which does not react with the material to be tested. The following liquids are suitable: for a density expected to be lower than 1 g/ml, a mixture of ethanol and water; for a density of 1 g/ml and higher, a mixture of zinc chloride

46、 and water. Three pieces of the sample shall be placed in the liquid at a temperature of (23,0 0,5) C, avoiding any formation of air bubbles. Distilled water shall be added to the liquid until the pieces are freely suspended within the liquid in the mixing cylinder. The liquid mixture shall be homog

47、eneous and maintained at the indicated temperature. The density of the liquid mixture shall be determined by means of the hydrometer and indicated to three decimal places; the determined density is the same as that of the samples under test. NOTE The gradient method specified in ISO 1183 may also be

48、 used. 4.3 Pycnometer method (reference method) 4.3.1 Testing equipment The testing equipment for this method consists of a balance with a precision of 0,1 mg, a pycnometer of 50 ml capacity, a liquid bath provided with a thermostatic control, immersion liquid (ethyl alcohol, 96 %). 4.3.2 Sample and

49、 test piece preparation The test piece shall be taken from the bare insulation or sheath. The mass of the test piece shall be not less than 1 g and not greater than 5 g. The test piece shall be made by cutting the sample of insulation or sheath into a number of small pieces; small tubes of insulation and sheath shall be cut longitudinally into two or more parts to prevent the enclosure