IEC 60838-1-2016 Miscellaneous lampholders - Part 1 General requirements and tests《杂类灯座.第1部分 一般要求和试验》.pdf

1、 IEC 60838-1 Edition 5.0 2016-05 REDLINE VERSION Miscellaneous lampholders Part 1: General requirements and tests IEC 60838-1:2016-05 RLV(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this

2、 publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or ha

3、ve an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec

4、.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constan

5、t review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specif

6、ications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information

7、on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds lead

8、ing online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnic

9、al terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your

10、 feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60838-1 Edition 5.0 2016-05 REDLINE VERSION Miscellaneous lampholders Part 1: General requirements and tests INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 29.140.10 ISBN 978-2-8322-34

11、27-3 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 60838-1:2016 RLV IEC 2016 CONTENTS FOREWORD . 3 1 General . 1 Scope 5 2 Normative references . 5 3 Terms and definition

12、s 7 4 General requirement 9 5 General conditions for tests . 9 6 Classification . 11 7 Marking . 11 8 Protection against electric shock 13 9 Terminals 14 10 Provision for earthing . 15 11 Construction 17 12 Moisture resistance, insulation resistance and electric strength 18 13 Mechanical strength .

13、19 14 Screws, current-carrying parts and connections 20 15 Creepage distances and clearances . 21 16 Endurance . 23 17 Resistance to heat and fire 24 18 Resistance to excessive residual stresses (season cracking) and to rusting 28 Annex A (normative informative) Examples of Lampholders covered by th

14、is standard . 29 Annex B (normative) Examples of Suitable metals . 31 Annex C (normative) Season cracking/corrosion test . 32 Annex D (normative) Pendulum impact test apparatus . 34 Bibliography . 37 Annex E (informative) Schedule of amended clauses and subclauses containing more serious/ critical r

15、equirements which require products to be retested . 36 Figure 1 Ball-pressure test apparatus . 25 Figure D.1 Impact test apparatus 34 Figure D.2 Mounting fixture 35 Table 1 Minimum values of insulation resistance. 19 Table 2 Height of fall 20 Table 2a Minimum distances for AC (50 Hz/60 Hz) sinusoida

16、l voltages Impulse withstand category II . 21 Table 2b Minimum distances for AC (50 Hz/60 Hz) sinusoidal voltages Impulse withstand category III 22 Table 3 Minimum distances for non-sinusoidal pulse voltages . 23 Table A.1 Lampholders covered by this standard 29 Table C.1 Test solution 32 IEC 60838-

17、1:2016 RLV IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MISCELLANEOUS LAMPHOLDERS Part 1: General requirements and tests FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC

18、National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, P

19、ublicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- go

20、vernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IE

21、C on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are acce

22、pted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote internatio

23、nal uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the la

24、tter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users sho

25、uld ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other dam

26、age of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of

27、 the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent righ

28、ts. DISCLAIMER This Redline version is not an official IEC Standard and is intended only to provide the user with an indication of what changes have been made to the previous version. Only the current version of the standard is to be considered the official document. This Redline version provides yo

29、u with a quick and easy way to compare all the changes between this standard and its previous edition. A vertical bar appears in the margin wherever a change has been made. Additions are in green text, deletions are in strikethrough red text. 4 IEC 60838-1:2016 RLV IEC 2016 International Standard IE

30、C 60838-1 has been prepared by subcommittee 34B: Lamp caps and holders, of IEC technical committee 34: Lamps and related equipment. This fifth edition cancels and replaces the fourth edition published in 2004, Amendment 1:2008 and Amendment 2:2011. This edition constitutes a technical revision. The

31、significant technical changes in this edition with respect to the previous edition include the introduction of new or revised requirements for single and dual contact ignition voltages, steel test caps and brass test caps and an Annex E listing amended requirements/clauses which require products to

32、be retested. The text of this standard is based on the following documents: FDIS Report on voting 34B/1850A/FDIS 34B/1856/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accor

33、dance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 60838 series, published under the general title Miscellaneous lampholders, can be found on the IEC website. In this standard, the following type is used: compliance statements: in italic type. The committee has decided that th

34、e contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTAN

35、T The “colour inside” logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. IEC 60838-1:2016 RLV IEC 2016 5 MISCELLANEOUS LAM

36、PHOLDERS Part 1: General requirements and tests 1 General 1 Scope This part of IEC 60838 applies to lampholders of miscellaneous types intended for building-in (to be used with general purpose light sources, projection lamps, floodlighting lamps and street-lighting lamps with caps as listed in Annex

37、 A) and the methods of test to be used in determining the safe use of lamps in lampholders. This part of IEC 60838 also covers lampholders which are integral with a luminaire. It covers the requirements for the lampholder only. This part of IEC 60838 also covers lampholders integrated in an outer sh

38、ell and dome similar to Edison screw lampholders. Such lampholders are further tested in accordance with the relevant clauses of IEC 60238. Lampholders designed with a barrel thread for shade holder rings should comply with IEC 60399. Requirements for lampholders for tubular fluorescent lamps, Ediso

39、n screw lampholders and bayonet lampholders are covered by separate standards. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated

40、 references, the latest edition of the referenced document (including any amendments) applies. NOTE With regard to IEC 60598-1, the references cited in this document are liable to change. IEC 60061 (all parts), Lamp caps and holders together with gauges for the control of interchangeability and safe

41、ty (available at http:/std.iec.ch/iec60061) IEC 60061-1: Lamp caps and holders together with gauges for the control of interchangeability and safety Part 1: Lamp caps IEC 60061-2, Lamp caps and holders together with gauges for the control of interchangeability and safety Part 2: Lampholders IEC 6006

42、1-3, Lamp caps and holders together with gauges for the control of interchangeability and safety Part 3: Gauges IEC 60068-2-20:1979, Environmental testing Part 2: Tests Test T: Soldering IEC 60068-2-75:1997 2014, Environmental testing Part 2-75: Tests Test Eh: Hammer tests 6 IEC 60838-1:2016 RLV IEC

43、 2016 IEC 60112:1979 2003, Method for the determination of the proof and the comparative tracking indices of solid insulating materials IEC 60112:2003/AMD1:2009 IEC 60227 (all parts), Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V IEC 60238:2004, Edison screw lam

44、pholders IEC 60245 (all parts), Rubber insulated cables Rated voltages up to and including 450/750 V IEC 60352-1, Solderless connections Part 1: Wrapped connections General requirements, test methods and practical guidance IEC 60399, Standard sheets for Barrel thread for E14 and E2 Barrel thread for

45、 lampholders with shade holder ring IEC 60417, Graphical symbols for use on equipment (available at http:/www.graphical- symbols.info/equipment) IEC 60529:1989, Degrees of protection provided by enclosures (IP code) 1 IEC 60529:1989/AMD1:1999 IEC 60529:1989/AMD2:2013 IEC 60598-1:2014, Luminaires Par

46、t 1: General requirements and tests IEC 60664-1:1992, Insulation co-ordination for equipment within low-voltage systems Part 1: Principles, requirements and tests 2) Amendment 1 (2000) Amendment 2 (2002) IEC 60695-2-2, Fire hazard testing Part 2: Test methods Section 2: Needle-flame test IEC 60695-2

47、-11, Fire hazard testing Part 2-11: Glowing/hot-wire based test methods Glow-wire flammability test method for end products (GWEPT) IEC 60695-11-5, Fire hazard testing Part 11-5: Test flames Needle-flame test method Apparatus, confirmatory test arrangement and guidance ISO 1456:2003, Metallic and ot

48、her inorganic coatings Electrodeposited coatings of nickel, nickel plus chromium, copper plus nickel and of copper plus nickel plus chromium ISO 2081:1986, Metallic and other inorganic coatings Electroplated coatings of zinc with supplementary treatments on iron or steel ISO 2093:1986, Electroplated

49、 coatings of tin Specification and test methods ISO 4046-4:2002, Paper, board, pulps and related terms Vocabulary Part 4: Paper and board grades and converted products _ 1A consolidated version of this publication exists, comprising IEC 60529:1989, IEC 60529:1989/AMD1:1999 and IEC 60529:1989/AMD2:2013. 2)A consolidated edition 1.2 (2002) exists that includes edition 1.0 (1992), its amendment 1 (2000) and amendment 2 (2002).