IEC 60862-1-2015 Surface acoustic wave (SAW) filters of assessed quality - Part 1 Generic specification《经质量评定的声表面波(SAW)滤波器 第1部分 总规范》.pdf

1、 IEC 60862-1 Edition 3.0 2015-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Surface acoustic wave (SAW) filters of assessed quality Part 1: Generic specification Filtres ondes acoustiques de surface (OAS) sous assurance de la qualit Partie 1: Spcification gnrique IEC 60862-1:2015-08(en-fr) THIS PUB

2、LICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writin

3、g from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further inform

4、ation. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national

5、de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3,

6、rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Ab

7、out IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the

8、 entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of

9、 criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online

10、 and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Elec

11、trotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IE

12、C TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire

13、 organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plu

14、s rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour

15、 PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications rempl

16、aces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en lig

17、ne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60

18、 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous d

19、sirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 60862-1 Edition 3.0 2015-08 INTERNATIONAL STANDARD NORME INTERNATIONALE Surface acoustic wave (SAW) filters of assessed quality Part 1: Generic specification Filtres ondes acoustique

20、s de surface (OAS) sous assurance de la qualit Partie 1: Spcification gnrique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 31.140 ISBN 978-2-8322-2863-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Ele

21、ctrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 60862-1:2015 IEC 2015 2 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3

22、 Terms, definitions, units and symbols 9 3.1 Terms and definitions 9 3.1.1 General terms 9 3.1.2 Response characteristics related terms . 12 3.1.3 SAW filter related terms . 16 3.2 Units and symbols. 18 4 Order of precedence of documents 18 5 Preferred values for ratings and characteristics . 19 5.1

23、 General . 19 5.2 Nominal frequencies . 19 5.2.1 Nominal frequency bands for use in RF applications 19 5.2.2 Nominal frequency bands for use in IF applications . 19 5.2.3 Nominal frequency values for use in broadcasting IF applications 19 5.3 Relative attenuation values specifying pass bandwidth for

24、 IF applications . 20 5.4 TTE signal suppression . 20 5.5 Operating temperature ranges, in degrees Celsius (C) 20 5.6 Climatic category 20 5.7 Bump severity . 20 5.8 Vibration severity 21 5.9 Shock severity 21 5.10 Fine leak rate 21 6 Marking . 22 6.1 Filter marking 22 6.2 Package marking 22 7 Quali

25、ty assessment procedures . 22 7.1 General . 22 7.2 Primary stage of manufacture . 22 7.3 Structurally similar components 22 7.4 Subcontracting 22 7.5 Incorporated components 23 7.6 Manufacturers approval 23 7.7 Approval procedures . 23 7.7.1 General . 23 7.7.2 Capability approval 23 7.7.3 Qualificat

26、ion approval 23 7.8 Procedures for capability approval 23 7.8.1 General . 23 7.8.2 Eligibility for capability approval . 24 7.8.3 Application for capability approval . 24 7.8.4 Granting of capability approval 24 7.8.5 Capability manual 24 7.9 Procedures for qualification approval 24 IEC 60862-1:2015

27、 IEC 2015 3 7.9.1 General . 24 7.9.2 Eligibility for qualification approval . 24 7.9.3 Application for qualification approval . 24 7.9.4 Granting of qualification approval 24 7.9.5 Quality conformance inspection . 24 7.10 Test procedures 24 7.11 Screening requirements 24 7.12 Rework and repair work

28、25 7.12.1 Rework 25 7.12.2 Repair work . 25 7.13 Certified records of released lots 25 7.14 Validity of release . 25 7.15 Release for delivery 25 7.16 Unchecked parameters . 25 8 Test and measurement procedures 25 8.1 General . 25 8.2 Test and measurement conditions . 25 8.2.1 Standard conditions fo

29、r testing 25 8.2.2 Precision of measurement . 26 8.2.3 Precautions . 26 8.2.4 Alternative test methods 26 8.3 Visual inspection . 26 8.3.1 General . 26 8.3.2 Visual test A 26 8.3.3 Visual test B 26 8.3.4 Visual test C 27 8.4 Dimensions and gauging procedures 27 8.4.1 Dimensions test A 27 8.4.2 Dimen

30、sions test B 27 8.5 Electrical test procedures 27 8.5.1 General . 27 8.5.2 Insertion attenuation measurement 27 8.5.3 Phase measurement 29 8.5.4 Group delay measurement . 29 8.5.5 Return attenuation measurement . 30 8.5.6 Unwanted signal measurement 32 8.5.7 Intermodulation distortion measurement 34

31、 8.5.8 Measurement of insertion attenuation, phase, and group delay characteristics at specified terminating impedances and at standard atmospheric conditions 35 8.5.9 Measurement of insertion attenuation, phase, and group delay characteristics as a function of temperature . 35 8.5.10 Measurement of

32、 return attenuation at specified terminating impedance and at the standard atmospheric conditions . 35 8.5.11 Measurement of unwanted signals at standard atmospheric conditions 35 8.5.12 Measurement of intermodulation distortion at standard atmospheric conditions 36 8.5.13 Measurement method for the

33、 balanced type filter . 36 8.5.14 Insulation resistance 38 4 IEC 60862-1:2015 IEC 2015 4 8.5.15 Voltage proof . 38 8.6 Mechanical and environmental test procedures . 38 8.6.1 Robustness of terminations (destructive) . 38 8.6.2 Sealing tests (non-destructive) 38 8.6.3 Soldering (solderability and res

34、istance to soldering heat) (destructive) 39 8.6.4 Rapid change of temperature: severe shock by liquid immersion (non- destructive) 40 8.6.5 Rapid change of temperature with prescribed time of transition (non- destructive) 40 8.6.6 Bump (destructive) 40 8.6.7 Vibration (destructive) 40 8.6.8 Shock (d

35、estructive) 41 8.6.9 Free fall (destructive) . 41 8.6.10 Acceleration, steady state (non-destructive) 41 8.6.11 Low air pressure (non-destructive) . 42 8.6.12 Dry heat (non-destructive) . 42 8.6.13 Damp heat, cyclic (destructive) 42 8.6.14 Cold (non-destructive) . 42 8.6.15 Climatic sequence (destru

36、ctive) . 42 8.6.16 Damp heat, steady state (destructive) 42 8.6.17 Salt mist cyclic (destructive) 42 8.6.18 Immersion in cleaning solvents (non-destructive) . 43 8.6.19 Flammability test (destructive) . 43 8.6.20 Electrostatic discharge (ESD) sensitivity test (destructive) . 43 8.7 Endurance test pr

37、ocedure . 43 Bibliography 44 Figure 1 Frequency response of a SAW filter . 18 Figure 2 Insertion attenuation, phase, and group delay measurement 28 Figure 3 Return attenuation measurement . 31 Figure 4 Unwanted signal measurement 33 Figure 5 Unwanted signals measured on time domain 34 Figure 6 Inter

38、modulation distortion measurement . 35 Figure 7 Four-port network analyzer measurement for balanced-balanced connection filter 37 Figure 8 Three-port network analyzer measurement for balanced-unbalanced connection filter 37 IEC 60862-1:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SURF

39、ACE ACOUSTIC WAVE (SAW) FILTERS OF ASSESSED QUALITY Part 1: Generic specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to pro

40、mote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides

41、 (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC al

42、so participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as poss

43、ible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. Wh

44、ile all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake

45、 to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestat

46、ion of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of t

47、his publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or i

48、ndirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for

49、 the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60862-1 has been prepared by IEC technical committee 49: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency contr