IEC 60874-19-3-2007 Fibre optic interconnecting devices and passive components - Connectors for optical fibres and cables - Part 19-3 Fibre optic adaptor (duplex) type SC for multi.pdf

1、 IEC 60874-19-3 Edition 2.0 2007-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors Detail specification Dispositifs dinterco

2、nnexion et composants passifs fibres optiques Connecteurs pour cbles et fibres optiques Partie 19-3: Adaptateur (duplex) pour fibres optiques de type SC pour connecteurs pour fibres multimodes Spcification particulire IEC 60874-19-3:2007 QC 910005XX0003 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyri

3、ght 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member Natio

4、nal Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs.

5、Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si v

6、ous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: in

7、mailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publication

8、s is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text,

9、 technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email.

10、 Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Cust

11、omer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotec

12、hnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuil

13、lez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence,

14、texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Dis

15、ponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement

16、 appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +

17、41 22 919 02 11 Fax: +41 22 919 03 00 IEC 60874-19-3 Edition 2.0 2007-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Connectors for optical fibres and cables Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors Deta

18、il specification Dispositifs dinterconnexion et composants passifs fibres optiques Connecteurs pour cbles et fibres optiques Partie 19-3: Adaptateur (duplex) pour fibres optiques de type SC pour connecteurs pour fibres multimodes Spcification particulire INTERNATIONAL ELECTROTECHNICAL COMMISSION COM

19、MISSION ELECTROTECHNIQUE INTERNATIONALE R ICS 33.180.20 PRICE CODE CODE PRIX ISBN 2-8318-9396-8 QC 910005XX0003 2 60874-19-3 IEC:2007 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS CONNECTORS FOR OPTICAL FIBRES AND CABLES Part 19-3: Fibre optic

20、 adaptor (duplex) type SC for multimode fibre connectors Detail specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

21、 international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (he

22、reafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also p

23、articipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible

24、, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While

25、all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to

26、apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicat

27、e its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including in

28、dividual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upo

29、n, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements

30、of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60874-19-3 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical comm

31、ittee 86: Fibre optics. This second edition cancels and replaces the first edition published in 1999. It constitutes a technical revision and the modal condition for the measurement is harmonised with IEC 61300-1. 60874-19-3 IEC:2007 3 The text of this standard is based on the following documents: F

32、DIS Report on voting 86B/2599/FDIS 86B/2641/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has not been drafted in complete accordance with the ISO/IEC Directives, Part 2. The QC number that app

33、ears on the front cover of this publication is the specification number in the IEC Quality Assessment System for Electronic Components (IECQ 910005XX0003). A list of all parts of the IEC 60874 series, published under the general title Fibre optic interconnecting devices and passive components Connec

34、tors for optical fibres and cables, can be found on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee has decided that the contents of this publi

35、cation will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 60874-19-3 IEC:2007 F

36、IBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS CONNECTORS FOR OPTICAL FIBRES AND CABLES Part 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors Detail specification FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS CONNECTORS FOR OPTICAL FIBRES AND CABLES P

37、art 19-3: Fibre optic adaptor (duplex) type SC for multimode fibre connectors Detail specification NATIONAL STANDARDS ORGANIZATION: Date. DETAIL SPECIFICATION IEC QC 910005XX0003 FIBRE OPTIC COMPONENT OF ASSESSED QUALITY IN ACCORDANCE WITH GENERIC SPECIFICATION: QC 910000 (IEC 60874-1) BLANK DETAIL

38、SPECIFICATION: QC 910004 (IEC 60874-1-1) FIBRE OPTIC ADAPTOR CLASSIFICATION: Type: Name: SC-(duplex) for multimode connectors For use in datacom applications as specified in ISO/IEC International Standard 11801:2002, Information technology Generic cabling for customer premises and as defined in cate

39、gory C of IEC 61753-1, Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standards Configuration: plug-adaptor-plug Coupling: push-pull Control dimensions: Adaptor: see Figures 1, 2, 3 and 5 Gauge: see Figure 4 Style: Resilie

40、nt sleeve alignment Variants: See page 10 Climatic category: 10/60/4 Environmental category: 4 ( category C of IEC 61753-3) Assessment level: A QUALIFICATION PROCEDURE: Fixed sample procedure SAFETY WARNING: Take care when handling small diameter optical fibre to prevent puncturing the skin, especia

41、lly in the eye area. Direct viewing of the end of an optical fibre when it is propagating energy is not recommended unless prior assurance is obtained as to the safe energy output level. 60874-19-3 IEC:2007 5 NOTE The dotted lines are for information only and represent the outer shape of the fixture

42、 of the adaptor. Figure 1 Adaptor mating face dimensions BC Partial cross section A-A Cross section B-B IEC 1030/99 6 60874-19-3 IEC:2007 Dimension Reference Minimum Maximum Notes A B D H I J K L O P R rS T U V AA AB AC AD AE BA BB BC DB DD 4,59 mm 4,90 mm 6,90 mm 0,40 mm 5,51 mm 0,06 mm 1,90 mm 2,0

43、0 mm 9,00 mm 7,40 mm 1,00 mm 3,80 mm 5,00 mm 0,60 mm 27 0,80 mm 0,40 mm 0,70 mm 0,40 mm 5,40 mm 10,80 mm 2,70 mm 12,65 mm 5,60 mm 4,69 mm 5,50 mm 7,10 mm 0,80 mm 5,90 mm 1,00 mm 2,10 mm 2,20 mm 9,10 mm 7,50 mm 1,10 mm 4,04 mm 5,30 mm 1,60 mm 33 1,00 mm 0,60 mm 0,80 mm 0,60 mm 5,60 mm 11,20 mm 2,80 m

44、m 12,75 mm 6,99 mm a , Diameter Diameter 1 Radius Diameter NOTE 1 Where a tolerance of form is not specified, the limits of the dimensions for a feature control the form as well as the size. NOTE 2 Where interrelated features of size (features shown with a common axis or centre plane) have no geomet

45、ric tolerance of location or run-out specified, the limits of the dimensions for a feature control the location tolerance as well as the size. NOTE 3 Where perpendicular features (features shown at right angles) have no geometric tolerance of orientation or run-out specified, the limits of the dimen

46、sions for a feature control the orientation tolerance as well as the size. a The connector alignment feature is a resilient alignment sleeve. The gauge retention force shall be measured with two gauge pins, each inserted into the middle of the alignment feature. The gauge retention force shall be fr

47、om 2,0 N to 5,9 N. Figure 1 Adaptor mating face dimensions (continued) 60874-19-3 IEC:2007 7 Dimension mm Reference Minimum Maximum Notes AF AG AH AJ AI AK AL AM AO 34,50 30,20 25,20 2,20 9,20 27,00 2,80 27,50 1,70 35,20 31,20 25,90 2,40 9,40 27,80 3,20 29,50 2,00 1 1 aNOTE 1 The dotted lines are il

48、lustrative only, the flange may be radiused or have square corners. aThe thickness of the panel shall be 1,6 mm when the adaptor is mounted using the spring hook. Figure 2 Adaptor dimension IEC 1031/99 8 60874-19-3 IEC:2007 BS BR BQ BPDimensions mm Reference Minimum Maximum BP BQ BR BS 30,60 26,20 2

49、,40 9,50 31,20 26,40 2,60 10,00 If the adaptor is mounted using bolts only, this hole shall be threaded M2. Figure 3 Panel piercing and mounting detail IEC 1032/99 60874-19-3 IEC:2007 9 CN C or R CK CLDimensions mm Reference Minimum Maximum Notes CK CL CN 2,498 5 2,80 7 2,499 5 4,80 a, baSurface roughness grade N4 (0,2 m Ra). bThe difference between