1、 IEC 60990 Edition 3.0 2016-05 REDLINE VERSION Methods of measurement of touch current and protective conductor current IEC 60990:2016-05 RLV(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of
2、this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright o
3、r have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www
4、.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under con
5、stant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Sp
6、ecifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives informat
7、ion on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds
8、leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotec
9、hnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us
10、your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 60990 Edition 3.0 2016-05 REDLINE VERSION Methods of measurement of touch current and protective conductor current INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 17.220, 35.020 ISB
11、N 978-2-8322-3449-5 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 60990:2016 RLV IEC 2016 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope 11 2 Normative references . 11 3
12、Terms and definitions. 12 4 Test site 13 4.1 Test site environment 13 4.2 Test transformer . 13 4.3 Earthed neutral conductor . 13 5 Measuring equipment . 14 5.1 Selection of measuring network . 14 5.1.1 General . 14 5.1.2 Perception and startle-reaction (a.c.) 1 6 5.1.3 Letgo-immobilization (a.c.)
13、. 16 5.1.4 Electric burn (a.c.) . 16 5.1.5 Ripple-free d.c. 16 5.2 Test electrodes . 17 5.2.1 Construction 17 5.2.2 Connection 17 5.3 Configuration 17 5.4 Power connections during test . 17 5.4.1 General . 17 5.4.2 Equipment for use only on TN or TT star power distribution systems . 22 5.4.3 Equipme
14、nt for use on IT power distribution systems including unearthed delta systems . 22 5.4.4 Equipment for use on single-phase centre-earthed power supply systems or on centre-earthed delta power supply systems . 22 5.5 Supply voltage and frequency 22 5.5.1 Supply voltage . 22 5.5.2 Supply frequency . 2
15、3 6 Test procedure 23 6.1 General . 23 6.1.1 Touch current measurements . 23 6.1.2 Control switches, equipment and supply conditions 23 6.1.3 Use of measuring networks 24 6.2 Normal and fault conditions of equipment 24 6.2.1 Normal operation of equipment 24 6.2.2 Equipment and supply fault condition
16、s 24 7 Evaluation of results 26 7.1 Perception, startle-reaction and letgo-immobilization . 26 7.2 Electric burn 26 8 Measurement of protective conductor current . 26 8.1 General . 26 8.2 Multiple equipment 26 8.3 Measuring method . 27 IEC 60990:2016 RLV IEC 2016 3 Annex A (normative) Equipment . 28
17、 Annex B (normative) Use of a conductive plane 29 Annex C (normative) Incidentally connected parts . 30 Annex D (informative) Choice of current limits 31 D.1 General . 31 D.2 Limit examples 31 D.2.1 Ventricular fibrillation . 31 D.2.2 Inability to letgo-immobilization . 31 D.2.3 Startle-reaction 31
18、D.2.4 Perception threshold 31 D.2.5 Special applications . 31 D.3 Choice of limits . 32 D.4 Electric burn effects of touch current . 33 Annex E (informative) Networks for use in measurement of touch current . 34 E.1 General . 34 E.2 Body impedance network Figure 3 34 E.3 Perception, Startle-reaction
19、 (and body impedance) network Figure 4 . 34 E.4 Letgo-immobilization (and body impedance) network Figure 5 . 35 Annex F (informative) Measuring network limitations and construction 36 Annex G (informative) Construction and application of touch current measuring instruments . 38 G.1 Considerations fo
20、r selection of components . 38 G.1.1 General . 38 G.1.2 Power rating and inductance for R S and R B38 G.1.3 Capacitor C S38 G.1.4 Resistors R1, R2 and R3 39 G.1.5 Capacitors C1, C2 and C3 39 G.2 Voltmeter 39 G.3 Accuracy . 39 G.4 Calibration and application of measuring instruments . 40 G.5 Records
21、40 G.6 Confirmation systems 41 Annex H (informative) Grippable part . Annex H (informative) Analysis of frequency filtered touch current circuit measurements 44 Annex I (informative) AC power distribution systems (see 5.4) 52 I.1 Introduction General 52 I.2 TN power systems . 53 I.3 TT power systems
22、 . 56 I.4 IT power systems 57 Annex J (informative) Routine and periodic touch current tests, and tests after repair or modification of mains operated equipment . 59 Annex K (normative) Network performance and calibration . 60 K.1 Network or instrument performance and initial calibration 60 K.2 Cali
23、bration in a confirmation system 62 K.2.1 General . 62 K.2.2 Measurement of input resistance 62 K.2.3 Measurement of instrument performance . 62 4 IEC 60990:2016 RLV IEC 2016 Annex M (informative) Bibliography . 65 Figure 1 Example of earthed neutral, direct supply 14 Figure 2 Example of earthed neu
24、tral, with transformer for isolation . 14 Figure 3 Measuring network, unweighted touch current . 15 Figure 4 Measuring network, touch current weighted for perception or startle-reaction 15 Figure 5 Measuring network, touch current weighted for letgo-immobilization 16 Figure 6 Test configuration: Sin
25、gle-phase equipment on star TN or TT system . 18 Figure 7 Test configuration: Single-phase equipment on centre-earthed TN or TT system 18 Figure 8 Test configuration: Single-phase equipment connected line-to-line on star TN or TT system . 19 Figure 9 Test configuration: Single-phase equipment connec
26、ted line-to-neutral on star IT system 19 Figure 10 Test configuration: Single-phase equipment connected line-to-line on star IT system 20 Figure 11 Test configuration: Three-phase equipment on star TN or TT system 20 Figure 12 Test configuration: Three-phase equipment on star IT system . 21 Figure 1
27、3 Test configuration: Unearthed delta system . 21 Figure 14 Test configuration: Three-phase equipment on centre-earthed delta system 22 Figure A.1 Equipment . 28 Figure B.1 Equipment platform . 29 Figure F.1 Frequency factor for electric burn 36 Figure F.2 Frequency factor for perception or startle-
28、reaction . 37 Figure F.3 Frequency factor for letgo-immobilization . 37 Figure H.1 Grippable part test device Figure H.1 Triangular waveform touch current, startle-reaction . 45 Figure H.3 1 ms rise time pulse response, startle-reaction 46 Figure H.4 1 ms rise time pulse response, letgo-immobilizati
29、on . 46 Figure H.5 Touch current vs. rise time plot, 20 ms square wave 47 Figure H.6 PFC SMPS touch current waveform . 47 Figure H.7 50 Hz square wave, 0,1 ms rise time, startle-reaction 48 Figure H.8 50 Hz square wave, 0,1 ms rise time, letgo-immobilization . 48 Figure H.9 IEC TS 60479-2 let-go thr
30、eshold for AC and DC combinations augmented by additional data, mA each axis . 49 Figure H.10 Ex1 case: showing r.m.s. window 50 Figure H.11 Waveform ex2 case: showing r.m.s. window 50 Figure I.1 Examples of TN-S power system 54 Figure I.2 Example of TN-C-S power system. 55 Figure I.3 Example of TN-
31、C power system 55 Figure I.4 Example of single-phase, 3-wire TN-C power system 56 Figure I.5 Example of 3-line and neutral TT power system 56 Figure I.6 Example of 3-line TT power system 57 Figure I.7 Example of 3-line (and neutral) IT power system . 57 IEC 60990:2016 RLV IEC 2016 5 Figure I.8 Examp
32、le of 3-line IT power system 58 Table H.1 Triangular waveform response comparison . 45 Table H.2 Square wave touch current response 46 Table H.3 Square wave monopolar touch current response . 48 Table H.4 Mixed ACnDC waveform evaluation, ex1 . 50 Table H.5 Mixed ACnDC waveform evaluation, ex2 . 51 T
33、able K.1 Calculated input impedance and transfer impedance for unweighted touch current measuring network (Figure 3) 60 Table K.2 Calculated input impedance and transfer impedance for perception or startle-reaction touch current measuring network (Figure 4) . 61 Table K.3 Calculated input impedance
34、and transfer impedance for letgo- immobilization current measuring network (Figure 5) . 61 Table K.4 Output voltage to input voltage ratios for unweighted touch current measuring network (Figure 3) 63 Table K.5 Output voltage to input voltage ratios for startle-reaction measuring network (Figure 4)
35、63 Table K.6 Output voltage to input voltage ratios for letgo-immobilization measuring network (Figure 5) . 64 6 IEC 60990:2016 RLV IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ METHODS OF MEASUREMENT OF TOUCH CURRENT AND PROTECTIVE CONDUCTOR CURRENT FOREWORD 1) The International Electrotechn
36、ical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this
37、 end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National C
38、ommittee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) i
39、n accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from
40、all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held
41、 responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any div
42、ergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC
43、 marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual ex
44、perts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC
45、 Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC
46、 Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. DISCLAIMER This Redline version is not an official IEC Standard and is intended only to provide the user with an indication of what changes have been made to the previou
47、s version. Only the current version of the standard is to be considered the official document. This Redline version provides you with a quick and easy way to compare all the changes between this standard and its previous edition. A vertical bar appears in the margin wherever a change has been made.
48、Additions are in green text, deletions are in strikethrough red text. IEC 60990:2016 RLV IEC 2016 7 International Standard IEC 60990 has been prepared by TC 108: Safety of electronic equipment within the field of audio/video, information technology and communication technology. This third edition ca
49、ncels and replaces the second edition published in 1999. It constitutes a technical revision. The principal changes in this edition as compared with the second edition are as follows: the effects names have been updated to reflect increased understanding of the range of effects and is in concert with present usage; the conditions of use invoking a GRIPPABLE PART have been reduced in the application of the requirements based upon
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1