IEC 61029-2-12-2010 Safety of transportable motor-operated electric tools - Part 2-12 Particular requirements for threading machines《便携式电动工具的安全性.第2-12部分 螺纹机的详细要求》.pdf

1、 IEC 61029-2-12 Edition 1.0 2010-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Safety of transportable motor-operated electric tools Part 2-12: Particular requirements for threading machines Scurit des machines-outils lectriques semi-fixes Partie 2-12: Exigences particulires pour les machines filet

2、er IEC 61029-2-12:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfil

3、m, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member Nation

4、al Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord cri

5、t de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Ce

6、ntral Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technolo

7、gies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue en

8、ables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a mont

9、h all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Als

10、o known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02

11、 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le con

12、tenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffect

13、uer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Publis

14、hed dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi

15、 que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez

16、 le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61029-2-12 Edition 1.0 2010-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Safety of transportable motor-operated electric tools Part 2-12: Particular requirements for threading machines Sc

17、urit des machines-outils lectriques semi-fixes Partie 2-12: Exigences particulires pour les machines fileter INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 25.080.99; 25.100.50 PRICE CODE CODE PRIX ISBN 978-2-88910-938-8 Registered trademark of the Interna

18、tional Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 61029-2-12 IEC:2010 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS Part 2-12: Particular requirements for threading machines FOREWORD 1) The Internati

19、onal Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electroni

20、c fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; a

21、ny IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standa

22、rdization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has rep

23、resentation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, I

24、EC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publ

25、ications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some are

26、as, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents includ

27、ing individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or relian

28、ce upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the ele

29、ments of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61029-2-12 has been prepared by IEC technical committee 116: Safety of hand-held motor-operated electric tools. The text of t

30、his standard is based on the following documents: FDIS Report on voting 116/34/FDIS 116/42/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directiv

31、es, Part 2. This Part 2-12 is to be used in conjunction with the first edition of IEC 61029-1 (1990). 61029-2-12 IEC:2010 3 This Part 2-12 supplements or modifies the corresponding clauses in IEC 61029-1, so as to convert it into the IEC Standard: Particular requirements for threading machines. Wher

32、e a particular subclause of Part 1 is not mentioned in this Part 2-12, that subclause applies as far as reasonable. Where this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly. The following print types are used: requirements: in r

33、oman type; test specifications: in italic type; notes: in small roman type. The terms defined in Clause 2 are printed in bold typeface. Subclauses, notes and figures which are additional to those in Part 1 are numbered starting from 101. A list of all parts of the IEC 61029 series, under the general

34、 title: Safety of transportable motor-operated electric tools, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specif

35、ic publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 4 61029-2-12 IEC:2010 SAFETY OF TRANSPORTABLE MOTOR-OPERATED ELECTRIC TOOLS Part 2-12: Particular requirements for threading machines 1 Scope This clause of Part 1 is applicable.

36、1.1 Addition: This standard applies to machines for creating external threads that either rotate the work piece or the cutting head. 2 Definitions This clause of Part 1 is applicable, except as follows: 2.21 Replacement: normal load load to obtain rated input 2.101 threading machine tool that is cap

37、able of creating an external thread through a mechanical process such as cutting or forming 2.102 BSPT style threads British Standard Pipe Taper style threads: 55 degree pressure-tight taper pipe threads (R) per ISO 7-1 2.103 NPT style thraeds National Pipe Taper style threads: 60 degree pressure-ti

38、ght taper pipe threads (NPT) per ANSI/ASME B1.20.2M 3 General requirement This clause of Part 1 is applicable. 4 General notes on tests This clause of Part 1 is applicable. 5 Rating This clause of Part 1 is applicable. 61029-2-12 IEC:2010 5 6 Classification This clause of Part 1 is applicable. 7 Mar

39、king This clause of Part 1 is applicable, except as follows: 7.1 Addition: In addition, the tool shall have the following marking: maximum diameter, in millimetres, of thread which can be cut. The diameter shall refer to a unified ISO thread to be cut on a pipe of steel having a tensile strength of

40、390 N/mm 2 , unless otherwise indicated on the tool. 7.13 Replacement: An instruction manual and safety instructions shall be provided with the tool and packaged in such a way that is noticed by the user when the tool is removed from the packaging. The safety instructions may be separate from the in

41、struction manual. An explanation of the symbols required by this standard shall be provided in either the instruction manual or the safety instructions. They shall be written in the official language(s) of the country in which the tool is sold. They shall be legible and contrast with the background.

42、 They shall include the name and address of the manufacturer or supplier of branded product. 7.13.101 Safety warnings The safety warnings specified in 7.13.101.1 and 7.13.101.2, if in English, shall be verbatim and in the exact order as given and in any other official language to be equivalent. Form

43、at of all safety warnings must differentiate, by font, highlighting or similar means, the context of the clauses as illustrated below. All notes in the safety warnings are not to be printed, they are information for the designer of the manual. 7.13.101.1 General Power Tool Safety Warnings WARNING Re

44、ad all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1) Work area safety a) Keep work area clean and well lit. Cluttered or dark areas invite acc

45、idents. b) Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes. c) Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control. 2)

46、 Electrical safety 6 61029-2-12 IEC:2010 a) Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching outlets will reduce risk of electric shock. b) Avoid body contact with earthed or grou

47、nded surfaces, such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is earthed or grounded. c) Do not expose power tools to rain or wet conditions. Water entering a power tool will increase the risk of electric shock. d) Do not abuse the cord.

48、 Never use the cord for carrying, pulling or unplugging the power tool. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or entangled cords increase the risk of electric shock. e) When operating a power tool outdoors, use an extension cord suitable for outdoor use. Use of a cord s

49、uitable for outdoor use reduces the risk of electric shock. f) If operating a power tool in a damp location is unavoidable or there is the likelihood of cutting into the cord, use a residual current device (RCD) protected supply. Use of an RCD reduces the risk of electric shock. NOTE The term “residual current device (RCD)” may be replaced by the term “ground fault circuit interrupter (GFCI)” or “earth leakage circui