1、INTERNATIONAL STANDARD IEC 1097-12 First edition 1996-11 Reference number IEC 1097-12: 1996 (E) Global maritime distress and safety system (GMDSS) Part 12: Survival craft portable twoway VHF radiotelephone apparatus Operational and performance requirements, methods of testing and required test resul
2、ts Systme mondial de dtresse et de scurit en mer (SMDSM) Partie 12: Radiotlphone metteurrcepteur portable VHF pour embarcation de sauvetage Exigences dexploitation et de fonctionnement, mthodes dessai et rsultats dessai exigsValidit de la prsente publication Le contenu technique des publications de
3、la CEI est cons- tamment revu par la CEI afin quil reflte ltat actuel de la technique. Des renseignements relatifs la date de reconfirmation de la publication sont disponibles auprs du Bureau Central de la CEI. Les renseignements relatifs ces rvisions, ltablis sement des ditions rvises et aux amende
4、ments peuvent tre obtenus auprs des Comits nationaux de la CEI et dans les documents cidessous: Bulletin de la CEI Annuaire de la CEI Publi annuellement Catalogue des publications de la CEI Publi annuellement et mis jour rgulirement Terminologie En ce qui concerne la terminologie gnrale, le lecteur
5、se reportera la CEI 50: Vocabulaire Electrotechnique Inter- national (VEI), qui se prsente sous forme de chapitres spars traitant chacun dun sujet dfini. Des dtails complets sur le VEI peuvent tre obtenus sur demande. Voir galement le dictionnaire multilingue de la CEI. Les termes et dfinitions figu
6、rant dans la prsente publi cation ont t soit tirs du VEI, soit spcifiquement approuvs aux fins de cette publication. Symboles graphiques et littraux Pour les symboles graphiques, les symboles littraux et les signes dusage gnral approuvs par la CEI, le lecteur consultera: la CEI 27: Symboles littraux
7、 utiliser en lectrotechnique; la CEI 417: Symboles graphiques utilisables sur le matriel. Index, relev et compilation des feuilles individuelles; la CEI 617: Symboles graphiques pour schmas; et pour les appareils lectromdicaux, la CEI 878: Symboles graphiques pour quipements lectriques en pratique m
8、dicale. Les symboles et signes contenus dans la prsente publi cation ont t soit tirs de la CEI 27, de la CEI 417, de la CEI 617 et/ou de la CEI 878, soit spcifiquement approuvs aux fins de cette publication. Publications de la CEI tablies par le mme comit dtudes Lattention du lecteur est attire sur
9、les listes figurant la fin de cette publication, qui numrent les publications de la CEI prpares par le comit dtudes qui a tabli la prsente publication. Validity of this publication The technical content of IEC publications is kept under constant review by the IEC, thus ensuring that the content refl
10、ects current technology. Information relating to the date of the reconfirmation of the publication is available from the IEC Central Office. Information on the revision work, the issue of revised editions and amendments may be obtained from IEC National Committees and from the following IEC sources:
11、 IEC Bulletin IEC Yearbook Published yearly Catalogue of IEC publications Published yearly with regular updates Terminology For general terminology, readers are referred to IEC 50: International Electrotechnical Vocabulary (IEV), which is issued in the form of separate chapters each dealing with a s
12、pecific field. Full details of the IEV will be supplied on request. See also the IEC Multilingual Dictionary. The terms and definitions contained in the present publi cation have either been taken from the IEV or have been specifically approved for the purpose of this publication. Graphical and lett
13、er symbols For graphical symbols, and letter symbols and signs approved by the IEC for general use, readers are referred to publications: IEC 27: Letter symbols to be used in electrical technology; IEC 417: Graphical symbols for use on equipment. Index, survey and compilation of the single sheets; I
14、EC 617: Graphical symbols for diagrams; and for medical electrical equipment, IEC 878: Graphical symbols for electromedical equipment in medical practice. The symbols and signs contained in the present publication have either been taken from IEC 27, IEC 417, IEC 617 and/or IEC 878, or have been spec
15、ifically approved for the purpose of this publication. IEC publications prepared by the same technical committee The attention of readers is drawn to the end pages of this publication which list the IEC publications issued by the technical committee which has prepared the present publication.INTERNA
16、TIONAL STANDARD IEC 1097-12 First edition 1996-11 CEI 1996 Droits de reproduction rservs Copyright all rights reserved Aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les micro
17、films, sans laccord crit de lditeur. No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher Bureau central de la Commission Electrotechnique Internationale
18、 3, rue de Varemb Genve SuisseCommission Electrotechnique InternationaleInternational Electrotechnical Commission CODE PRIX PRICE CODE Pour prix, voir catalogue en vigueur For price, see current catalogue R Global maritime distress and safety system (GMDSS) Part 12: Survival craft portable twoway VH
19、F radiotelephone apparatus Operational and performance requirements, methods of testing and required test results Systme mondial de dtresse et de scurit en mer (SMDSM) Partie 12: Radiotlphone metteurrcepteur portable VHF pour embarcation de sauvetage Exigences dexploitation et de fonctionnement, mth
20、odes dessai et rsultats dessai exigs 2 109712 IEC:1996 (E) CONTENTS Page FOREWORD 3 Clause 1 Scope 5 2 Normative references 5 3 Performance requirements. 6 3.1 Introduction. 6 3.2 General. 6 3.3 General requirements. 6 3.4 Environmental requirements. 8 3.5 Electromagnetic compatibility 8 4 Technical
21、 characteristics. 8 4.1 General. 8 4.2 Class of emission and modulation characteristics 8 4.3 Transmitter 8 4.4 Receiver 9 5 Methods of testing and required test results . 9 5.1 Test conditions 9 5.2 General conditions of measurement. 12 5.3 Power supply. 13 5.4 Transmitter 14 5.5 Receiver 22 5.6 Ba
22、ttery charger 29 5.7 Electromagnetic compatibility 29 Figures 1 Transmitter permissible frequency deviation 30 2 Storage oscilloscope view t 1 , t 2and t 3. 31 3 Test setup for measuring transient frequency behaviour 32 4 Receiver audiofrequency response 32 Annexes A Power measuring receiver specifi
23、cation . 33 B Simulated solar radiation source 35 C Bibliography. 36109712 IEC:1996 (E) 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM (GMDSS) Part 12: Survival craft portable twoway VHF radiotelephone apparatus Operational and performance requirements, meth
24、ods of testing and required test results FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of the IEC is to promote international co-operation on al
25、l questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may part
26、icipate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreemen
27、t between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested National Committees. 3) The docu
28、ments produced have the form of recommendations for international use and are published in the form of standards, technical reports or guides and they are accepted by the National Committees in that sense. 4) In order to promote international unification, IEC National Committees undertake to apply I
29、EC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be clearly indicated in the latter. 5) The IEC provides no marking procedure to indicate
30、 its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Standard may be the subject of patent rights. The IEC shall not be held responsible for
31、identifying any or all such patent rights. International Standard IEC 1097-12 has been prepared by IEC technical committee 80: Maritime navigation and radiocommunication equipment and systems. The text of this standard is based on the following documents: FDIS Report on voting 80/126/FDIS 80/136/RVD
32、 Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. Annexes A and B form an integral part of this standard. Annex C is for information only. The French version of this standard will be issued separately. 4 109712 IEC:19
33、96 (E)109712 IEC:1996 (E) 5 GLOBAL MARITIME DISTRESS AND SAFETY SYSTEM (GMDSS) Part 12: Survival craft portable twoway VHF radiotelephone apparatus Operational and performance requirements, methods of testing and required test results 1 Scope This part of IEC 1097 specifies the minimum performance r
34、equirements, technical charac- teristics and methods of testing with required test results of survival craft portable two-way radiotelephone apparatus as required by chapter III of the 1988 amendments to the 1974 International Convention for the Safety of Life at Sea (SOLAS), and which is associated
35、 with IEC 945. When a requirement in this standard is different from IEC 945, the requirement in this standard shall take precedence. This standard incorporates the applicable parts of the performance requirements included in IMO Resolution A.809(19) annex 1 and the technical characteristics include
36、d in ITU M.489-2 and ITU-R M.542-1, and takes account of the general requirements contained in IMO Resolution A.694(17), and conforms with the ITU Radio Regulations where applicable. NOTE All text of this standard, whose wording is identical to that in IMO Resolutions A.809(19) and A.694(17) and ITU
37、R M.4892 is printed in italics and the Resolution/Recommendation and paragraph numbers are indicated in brackets. 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 1097. At the time of publicat
38、ion, the editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 1097 are encouraged to investigate the possibility of applying the most recent edition of the normative documents indicated below. Members of IEC and ISO maint
39、ain registers of currently valid International Standards. IEC 529: 1989, Degrees of protection provided by enclosures (IP code) IEC 945: 1994, Marine navigational equipment General requirements Methods of testing and required test results IMO International Convention for the Safety of Life At Sea (S
40、OLAS): 1974, as amended 1988 (GMDSS) Chapter III: Lifesaving appliances and arrangements IMO Resolution A.694(17): 1991, General requirements for shipborne radio equipment forming part of the global maritime distress and safety system (GMDSS) and for electronic navigational aids IMO Resolution A.809
41、(19): 1995, Performance standards for survival craft twoway VHF radiotelephone apparatus ITU Radio Regulations: 1995, Appendix S3: Table of maximum permitted spurious emissions power levels ITU Radio Regulations: 1990, Appendix 18: Table of transmitting frequencies in the band 156 174 MHz for statio
42、ns in the maritime mobile service ITU-R M.489-2: 1995, Technical characteristics of radiotelephone equipment operating in the maritime mobile service in channels spaced by 25 kHz ITU-R M.542-1: 1982, Onboard communications by means of portable radiotelephone equipment 6 109712 IEC:1996 (E) 3 Perform
43、ance requirements 3.1 Introduction Performance requirements described in this clause are specified by referring to IMO Resolutions and ITU Recommendations. In addition to meeting performance requirements in this clause, the equipment shall comply with the technical characteristics contained in claus
44、e 4 of this standard. 3.2 General 3.2.1 (A.809(19) 1/2.1) The equipment shall be portable and capable of being used for on- scene communication between survival craft, between survival craft and ship and between survival craft and rescue unit. It may also be used for on-board communications when cap
45、able of operating on appropriate frequencies. 3.2.2 (A.809(19) 1/2.3) The equipment shall: 1) be capable of being operated by unskilled personnel; 2) be capable of being operated by personnel wearing gloves as specified for immersion suits in regulation 33 of chapter III of the SOLAS 1974 Convention
46、; 3) be capable of single-handed operation except for channel selection; 9) be of small size and light weight; 10) be capable of operating in the ambient noise level likely to be encountered on board ships or survival craft; 11) have provisions for its attachment to the clothing of the user, includi
47、ng the immersion suit; and 12) be resistant to deterioration by prolonged exposure to sunlight. 3.2.3 (A.809(19) 1/2.3.13) The equipment shall be either of a highly visible yellow/orange colour or marked with a surrounding yellow/orange marking strip. 3.3 General requirements 3.3.1 Composition (A.80
48、9(19) 1/2.2) The equipment shall comprise at least: 1) an integral transmitter/receiver including antenna and battery; 2) an integral control unit including a press-to-transmit switch; 3) an internal microphone and loudspeaker. 3.3.2 Controls and indicators 3.3.2.1 (A.809(19) 1/4.1)An on/off switch
49、shall be provided with positive visual indication that the radiotelephone is switched on. 3.3.2.2 (A.809(19) 1/4.2) The receiver shall be provided with a manual volume control by which the audio output may be varied. 3.3.2.3 (A.809(19) 1/4.3) A squelch (mute) control and channel selection switch shall be provided. 3.3.2.4 (A.809(19) 1/4.4) Ch
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1