IEC 61108-3-2010 Maritime navigation and radiocommunication equipment and systems - Global navigation satellite systems (GNSS) - Part 3 Galileo receiver equipment - Performance req.pdf

1、 IEC 61108-3 Edition 1.0 2010-05 INTERNATIONAL STANDARD Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 3: Galileo receiver equipment Performance requirements, methods of testing and required test results IEC 61108-3:2010(E) colour ins

2、ide THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permissi

3、on in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for fu

4、rther information. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electr

5、onic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The

6、 IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Publi

7、shed details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in

8、additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csci

9、ec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61108-3 Edition 1.0 2010-05 INTERNATIONAL STANDARD Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 3: Galileo receiver equipment Performance requirements, methods of testing and re

10、quired test results INTERNATIONAL ELECTROTECHNICAL COMMISSION XA ICS 47.020.70 PRICE CODE ISBN 978-2-88910-945-6 Registered trademark of the International Electrotechnical Commission colour inside 2 61108-3 IEC:2010(E) CONTENTS FOREWORD.5 1 Scope.7 2 Normative references .7 3 Terms, definitions and

11、abbreviations 8 3.1 Terms and definitions 8 3.2 Abbreviations 8 4 Minimum performances standards 9 4.1 Object .9 4.2 Galileo receiver equipment10 4.2.1 Minimum facilities10 4.2.2 Configuration.10 4.2.3 Quality assurance10 4.3 Performance standards for Galileo receiver equipment10 4.3.1 General .10 4

12、.3.2 Equipment output 11 4.3.3 Accuracy .12 4.3.4 Acquisition.12 4.3.5 Antenna and input/output connections .13 4.3.6 Antenna design .13 4.3.7 Dynamic range 13 4.3.8 Protection from specific interfering signals.13 4.3.9 Position update .14 4.3.10 Differential Galileo input 14 4.3.11 Navigational war

13、nings and status indications.14 4.3.12 Output of COG, SOG and UTC 18 4.3.13 Typical interference conditions 19 5 Methods of testing and required test results .19 5.1 Test sites 19 5.2 Test sequence.20 5.3 Test signals.20 5.4 Determination of accuracy.21 5.5 General requirements and presentation requ

14、irements21 5.5.1 Normal conditions21 5.5.2 General requirements21 5.5.3 Presentation requirements.21 5.6 Receiver tests .21 5.6.1 Galileo receiver equipment 21 5.6.2 Position output 22 5.6.3 Equipment output 22 5.6.4 Accuracy .22 5.6.5 Acquisition.23 5.6.6 Antenna and input/output connections .24 5.

15、6.7 Antenna design .24 5.6.8 Sensitivity and dynamic range .24 5.6.9 Protection from other shipborne transmitters .25 5.6.10 Position update .25 61108-3 IEC:2010(E) 3 5.6.11 Differential Galileo input 26 5.6.12 Navigational warnings and status indications.26 5.6.13 Accuracy of COG and SOG .29 5.6.14

16、 Validity of COG and SOG information29 5.6.15 Output of UTC .30 5.7 Tests for typical RF interference conditions.30 5.7.1 Simulator conditions 30 5.7.2 Navigation solution accuracy test 30 5.7.3 Re-acquisition test.31 Annex A (informative) Galileo navigation signals characteristics 33 Annex B (infor

17、mative) The Galileo integrity concept.35 Annex C (informative) Receiver autonomous integrity monitoring (RAIM).41 Annex D (normative) Galileo standard received signals and interference environment .51 Annex E (informative) Galileo RAIM testing .56 Bibliography58 Figure B.1 Graphical illustration of

18、SISA and SISMA GIC05.37 Figure C.1 Navigation alerts and FDE events.42 Figure C.2 RNP parameters.43 Figure C.3 Receiver autonomous integrity monitoring (RAIM) 44 Figure C.4 Position errors 45 Figure C.5 Decision threshold and minimum detectable bias for the (W)SSE statistic.46 Figure C.6 Maximum res

19、idual test statistic .47 Figure C.7 Geometry screening .48 Figure D.1 E5 in-band and near-band maximum CW RFI levels .52 Figure D.2 E1 in-band and near-band maximum CW RFI levels .53 Figure D.3 E5 Maximum in-band CW/NBI RFI levels 54 Figure D.4 E1 Maximum in-band CW/NBI RFI levels 54 Table 1 Acquisi

20、tion time limits13 Table 2 RAIM integrity states .17 Table 3 Integrity states corresponding to the Galileo integrity message .18 Table 4 Accuracy of COG 19 Table 5 RF interference values 31 Table A.1 General characteristics of the Galileo navigation signals33 Table A.2 General characteristics of Gal

21、ileo observables.34 Table B.1 Integrity flag values38 Table C.1 Galileo satellite failure GIC05 49 Table C.2 RAIM-FDE parameters.50 Table D.1 Minimum and maximum receiver power levels on ground.51 Table D.2 Minimum and maximum levels at antenna port and receiver input 51 Table D.3 Table of main char

22、acteristics of Figure D.1 above52 Table D.4 Table of main characteristics of Figure D.2 53 Table D.5 E5 maximum in-band RFI levels versus bandwidth.54 4 61108-3 IEC:2010(E) Table D.6 E5 maximum in-band RFI levels versus bandwidth.55 Table E.1 Scenario overview57 61108-3 IEC:2010(E) 5 INTERNATIONAL E

23、LECTROTECHNICAL COMMISSION _ MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) Part 3: Galileo receiver equipment Performance requirements, methods of testing and required test results FOREWORD 1) The International Electrotechnical Commission

24、 (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in add

25、ition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee intere

26、sted in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance wi

27、th conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested

28、IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible fo

29、r the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between

30、 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of confo

31、rmity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and membe

32、rs of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or

33、 any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication ma

34、y be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61108-3 has been prepared by IEC technical committee 80: Maritime navigation and radiocommunication equipment and systems. The text of this standard is based

35、 on the following documents: FDIS Report on voting 80/590/FDIS 80/595/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 6 61108-3

36、 IEC:2010(E) A list of all the parts in the IEC 61108 series, under the general title: Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS), can be found on the IEC website. The committee has decided that the contents of this publication will re

37、main unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be

38、 issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 61108-3 IEC:2010(E) 7

39、 MARITIME NAVIGATION AND RADIOCOMMUNICATION EQUIPMENT AND SYSTEMS GLOBAL NAVIGATION SATELLITE SYSTEMS (GNSS) Part 3: Galileo receiver equipment Performance requirements, methods of testing and required test results 1 Scope This part of IEC 61108 specifies the minimum performance standards, methods o

40、f testing and required test results for Galileo shipborne receiver equipment, based on IMO resolution MSC.233(82), which uses the signals from the Galileo Global Navigation Satellite System in order to determine position. It takes account of the general requirements given in IMO resolution A.694(17)

41、 and is associated with IEC 60945. When a requirement in this standard is different from IEC 60945, the requirement in this standard takes precedence. It also takes account, as appropriate, of requirements for the presentation of navigation-related information on shipborne navigational displays give

42、n in IMO resolution MSC.191(79) and is associated with IEC 62288. A description of the Galileo Open Service and Safety of Life Service is given in the Galileo interface control documents (see Bibliography). This receiver standard applies to navigation in ocean waters for the open service and harbour

43、 entrances, harbour approaches and coastal waters for the Safety of Life service, as defined in IMO resolution A.953(23). All text of this standard, whose meaning is identical to that in IMO resolution MSC.233(82), is printed in italics and the resolution and paragraph numbers are indicated in brack

44、ets i.e. (M.233/A1.2). The requirements in Clause 4 are cross-referenced to the tests in Clause 5 and vice versa. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refere

45、nces, the latest edition of the referenced document (including any amendments) applies. IEC 60721-3-6:1987, Classification of environmental conditions Part 3-6: Classification of groups of environmental parameters and their severities Ship environment IEC 60945, Maritime navigation and radiocommunic

46、ation equipment and systems General requirements Methods of testing and required test results IEC 61108-1:2003, Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 1: Global positioning system (GPS) Receiver equipment Performance standards

47、, methods of testing and required test results IEC 61108-4, Maritime navigation and radiocommunication equipment and systems Global navigation satellite systems (GNSS) Part 4: Shipborne DGPS and DGLONASS maritime radio beacon receiver equipment Performance requirements, methods of testing and requir

48、ed test results 8 61108-3 IEC:2010(E) IEC 61162 (all parts), Maritime navigation and radiocommunication equipment and systems Digital interfaces IEC 61162-1, Maritime navigation and radiocommunication equipment and systems Digital interfaces Part 1: Single talker and multiple listeners IEC 62288, Ma

49、ritime navigation and radiocommunication equipment and systems Presentation of navigation-related information on shipborne navigational displays General requirements Methods of testing and required test results IMO resolution A.694(17), General requirements for shipborne radio equipment forming part of the Global maritime distress and safety system (GMDSS) and for electronic navigatio