IEC 61140-2016 Protection against electric shock - Common aspects for installations and equipment《电击防护.设施与设备的共同外观》.pdf

1、 IEC 61140 Edition 4.0 2016-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Protection against electric shock Common aspects for installations and equipment Protection contre les chocs lectriques Aspects communs aux installations et aux matriels IEC 61140:2016-01(en-fr) BASIC SAFETY PUBLICATION PUBLI

2、CATION FONDAMENTALE DE SCURIT THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and m

3、icrofilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member

4、 National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans lacc

5、ord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Cen

6、tral Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, e

7、lectronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stan

8、d-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to

9、 find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new p

10、ublications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also kno

11、wn as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier

12、publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (I

13、EC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous poss

14、dez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIE

15、C. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les

16、publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier d

17、ictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary

18、65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous

19、 dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61140 Edition 4.0 2016-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Protection against electric shock Common aspects for installations and equipment Protection contre les chocs l

20、ectriques Aspects communs aux installations et aux matriels INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 13.260; 29.020; 91.140.50 ISBN 978-2-8322-3103-6 BASIC SAFETY PUBLICATION PUBLICATION FONDAMENTALE DE SCURIT Registered trademark of the International

21、Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61140:2016 IEC 2016 C

22、ONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms and definitions 8 4 Fundamental rule of protection against electric shock 18 4.1 General . 18 4.2 Normal conditions . 19 4.3 Single-fault conditions . 20 4.3.1 General . 20 4.3.2 Protection by independent protective provisions 20 4.3.3

23、Protection by an enhanced protective provision . 20 4.4 Additional protection . 20 4.5 Protection against electric burns . 21 4.6 Protection against physiological effects without adverse health effect . 21 4.6.1 General . 21 4.6.2 Muscular reaction 21 4.6.3 Effects of touch current of discharge of e

24、lectrostatic charges . 22 4.6.4 Thermal effects 22 5 Protective provisions (elements of protective measures) 22 5.1 General . 22 5.2 Provisions for basic protection 22 5.2.1 General . 22 5.2.2 Basic insulation . 22 5.2.3 Protective barriers or enclosures . 23 5.2.4 Obstacles 23 5.2.5 Placing out of

25、arms reach . 23 5.2.6 Limitation of voltage 24 5.2.7 Limitation of steady-state touch current and energy . 24 5.2.8 Potential grading . 25 5.2.9 Other provisions for basic protection 25 5.3 Provisions for fault protection 25 5.3.1 General . 25 5.3.2 Supplementary insulation . 25 5.3.3 Protective-equ

26、ipotential-bonding 25 5.3.4 Protective screening 27 5.3.5 Indication and disconnection in high-voltage installations and systems 27 5.3.6 Automatic disconnection of supply . 27 5.3.7 Simple separation (between circuits) . 28 5.3.8 Non-conducting environment . 28 5.3.9 Potential grading . 28 5.3.10 O

27、ther provisions for fault protection . 28 5.4 Enhanced protective provisions. 28 5.4.1 General . 28 5.4.2 Reinforced insulation . 29 5.4.3 Protective separation between circuits . 29 5.4.4 Limited current source . 29 IEC 61140:2016 IEC 2016 3 5.4.5 Protective impedance device . 29 5.4.6 Other provis

28、ions for enhanced protection . 30 5.5 Provisions for additional protection . 30 5.5.1 Additional protection by residual current protective device (RCD) I n 30 mA . 30 5.5.2 Additional protection by supplementary equipotential bonding . 30 6 Protective measures 30 6.1 General . 30 6.2 Protection by a

29、utomatic disconnection of supply . 31 6.3 Protection by double or reinforced insulation . 31 6.4 Protection by protective equipotential bonding 31 6.5 Protection by electrical separation 31 6.6 Protection by non-conducting environment (low-voltage) . 31 6.7 Protection by SELV system . 32 6.8 Protect

30、ion by PELV system . 32 6.9 Protection by limitation of steady-state touch current and charge 32 6.10 Additional protection . 32 6.10.1 Additional protection by residual current protective device (RCD) I n 30 mA . 32 6.10.2 Additional protection by supplementary protective equipotential bonding . 32

31、 6.11 Protection by other measures . 33 7 Co-ordination between electrical equipment and protective provisions within an electrical installation 33 7.1 General . 33 7.2 Class 0 equipment 33 7.3 Class I equipment . 34 7.3.1 General . 34 7.3.2 Insulation . 34 7.3.3 Connection to the protective conduct

32、or 34 7.3.4 Accessible surfaces of parts of insulating material . 34 7.3.5 Connection of a protective conductor . 35 7.4 Class II equipment 35 7.4.1 General . 35 7.4.2 Insulation . 35 7.4.3 Protective bonding . 36 7.4.4 Marking . 36 7.5 Class III equipment . 36 7.5.1 General . 36 7.5.2 Voltages 36 7

33、.5.3 Protective bonding . 37 7.5.4 Marking . 37 7.6 Touch currents, protective conductor currents . 37 7.6.1 General . 37 7.6.2 Touch currents 37 7.6.3 Protective conductor currents 37 7.6.4 Other requirements 39 7.6.5 Other effects 39 7.7 Safety and boundary clearances and hazard marking for high-v

34、oltage installations 39 4 IEC 61140:2016 IEC 2016 7.8 Functional earthing . 40 8 Special operating and servicing conditions 40 8.1 General . 40 8.2 Devices to be operated manually and components intended to be replaced manually . 40 8.2.1 General . 40 8.2.2 Devices to be operated or components inten

35、ded to be replaced by ordinary persons in low-voltage installations, systems and equipment . 40 8.2.3 Devices to be operated or components intended to be replaced by skilled or instructed persons 41 8.3 Electrical values after isolation 41 8.4 Devices for isolation 42 8.4.1 General . 42 8.4.2 Device

36、s for isolation for low voltage . 42 8.4.3 Devices for isolation for high voltage . 43 Annex A (informative) Survey of protective measures as implemented by protective provisions . 45 Annex B (informative) Index of terms . 48 Annex C (informative) List of notes concerning certain countries . 53 Bibl

37、iography 54 Figure A.1 Protective measures with basic and fault protection 45 Figure A.2 Protective measures with limited values of electrical quantities . 46 Figure A.3 Protective measure: additional protection (in addition to basic and/or fault protection) 47 Table 1 Limits for voltage bands 19 Ta

38、ble 2 Touch voltage thresholds for reaction 21 Table 3 Application of equipment in a low-voltage installation 33 Table 4 Maximum protective conductor current for frequencies up to 1 kHz . 38 Table 5 Maximum protective conductor current for DC . 38 Table 6 Minimum impulse withstand voltage of devices

39、 for isolation related to the nominal voltage 43 IEC 61140:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ PROTECTION AGAINST ELECTRIC SHOCK COMMON ASPECTS FOR INSTALLATION AND EQUIPMENT FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for stand

40、ardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Int

41、ernational Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participa

42、te in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement betwee

43、n the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications

44、 have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any

45、misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding n

46、ational or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any servic

47、es carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC Natio

48、nal Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is

49、 drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61140 has been prepared by IEC te