IEC 61169-16-2006 Radio-frequency connectors - Part 16 Sectional specification - RF coaxial connectors with inner diameter of outer conductor 7 mm (0 276 in) with screw coupling - .pdf

1、 INTERNATIONAL STANDARD IEC 61169-16 QC 222400First edition 2006-12Radio-frequency connectors Part 16: Sectional specification RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling Characteristics impedance 50 (75 ) (type N) Reference number IEC 61169-16:20

2、06(E) Publication numbering As from 1 January 1997 all IEC publications are issued with a designation in the 60000 series. For example, IEC 34-1 is now referred to as IEC 60034-1. Consolidated editions The IEC is now publishing consolidated versions of its publications. For example, edition numbers

3、1.0, 1.1 and 1.2 refer, respectively, to the base publication, the base publication incorporating amendment 1 and the base publication incorporating amendments 1 and 2. Further information on IEC publications The technical content of IEC publications is kept under constant review by the IEC, thus en

4、suring that the content reflects current technology. Information relating to this publication, including its validity, is available in the IEC Catalogue of publications (see below) in addition to new editions, amendments and corrigenda. Information on the subjects under consideration and work in pro

5、gress undertaken by the technical committee which has prepared this publication, as well as the list of publications issued, is also available from the following: IEC Web Site (www.iec.ch) Catalogue of IEC publications The on-line catalogue on the IEC web site (www.iec.ch/searchpub) enables you to s

6、earch by a variety of criteria including text searches, technical committees and date of publication. On-line information is also available on recently issued publications, withdrawn and replaced publications, as well as corrigenda. IEC Just Published This summary of recently issued publications (ww

7、w.iec.ch/online_news/ justpub) is also available by email. Please contact the Customer Service Centre (see below) for further information. Customer Service Centre If you have any questions regarding this publication or need further assistance, please contact the Customer Service Centre: Email: custs

8、erviec.ch Tel: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IEC 61169-16 QC 222400First edition 2006-12Radio-frequency connectors Part 16: Sectional specification RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling Characteristics impedan

9、ce 50 (75 ) (type N) IEC 2006 Copyright - all rights reserved No part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from the publisher. International Electrotechnical Commis

10、sion, 3, rue de Varemb, PO Box 131, CH-1211 Geneva 20, Switzerland Telephone: +41 22 919 02 11 Telefax: +41 22 919 03 00 E-mail: inmailiec.ch Web: www.iec.ch V For price, see current catalogue PRICE CODE Commission Electrotechnique Internationale International Electrotechnical Commission 2 61169-16

11、IEC:2006(E) CONTENTS FOREWORD.4 1 Scope.6 2 Normative references .6 3 IEC type designation 7 4 Interface dimensions 7 4.1 Dimensions General purpose connectors Grade 2 .7 5 Mechanical gauges and standard test connectors.12 5.1 Mechanical gauges12 5.2 Standard test connectors Grade 0 13 6 Overall dim

12、ensions.17 7 Quality assessment procedures17 7.1 General .17 7.2 Ratings and characteristics .17 7.3 Test schedule and inspection requirements.20 7.4 Procedures22 8 Instructions for preparation of detail specifications .22 8.1 General .22 8.2 Identification of the Detail specification .22 8.3 Identi

13、fication of the component23 8.4 Performance23 8.5 Marking, ordering information and related matters.23 8.6 Selection of tests, test conditions and severities23 8.7 Blank detail specification pro-forma for type N connector 24 Annex A (informative) Guidance information for interface dimensions of 75 c

14、haracteristic impedance general purpose connectors 29 Figure 1 Connector with pin centre contact .8 Figure 2 Details of pin centre contact 8 Figure 3 Connector with socket centre contact 10 Figure 4 Details of socket centre contact 10 Figure 5 Gauge rings for outer contact of pin connector.12 Figure

15、 6 Gauge and test pins for socket centre contact .13 Figure 7 Standard test connector with pin centre contact 14 Figure 8 Details of pin centre contact 14 Figure 9 Standard test connector with socket centre contact .16 Figure 10 Details of socket centre contact 16 Figure A.1 Details of pin centre co

16、ntact29 Table 1 Dimensions for connector with pin centre contact 9 Table 2 Dimensions for connector with socket centre contact.11 Table 3 Dimensions for test pins for socket centre contact.13 Table 4 Dimensions for standard test connector with pin centre contact.15 61169-16 IEC:2006(E) 3 ) Table 5 D

17、imensions for standard test connector with socket centre contact .17 Table 6 Ratings and characteristics .18 Table 7 Acceptance tests.20 Table 8 Periodic tests 21 4 61169-16 IEC:2006(E) INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 16: Sectional specification RF coaxial

18、 connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupling Characteristics impedance 50 (75 ) (type N) FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC

19、National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, P

20、ublicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- go

21、vernmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IE

22、C on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are acce

23、pted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote internatio

24、nal uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the la

25、tter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its

26、directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses ar

27、ising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention i

28、s drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61169-16 has been prepared by subcommittee 46F: R.F. and microwave passive com

29、ponents, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. This part of IEC 61169 cancels and replaces IEC 60169-16 published in 1982 and Amendment 1 (1996). This edition constitutes a technical revision. This edition in

30、cluded the following significant technical changes with respect to IEC 60169-16: Clauses 7 and 8 have been totally re-written and Clause 9 has been removed Clause 7 currently include test schedules and Clause 8 gives indications to fill a Blank Detail Specification (BDS). 61169-16 IEC:2006(E) 5 ) Th

31、e text of this standard is based on the following documents: FDIS Report on voting 46F/54/FDIS 46F/59/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The QC numbers that appear on the front cover of this publicat

32、ion are the specification numbers in the IEC Quality Assessment System for Electronic Components (IECQ). This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61169 series, under the general title Radio frequency connectors, can be found

33、on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result dateindicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, w

34、ithdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. 6 61169-16 IEC:2006(E) RADIO-FREQUENCY CONNECTORS Part 16: Sectional specification RF coaxial connectors with inner diameter of outer conductor 7 mm (0,276 in) with screw coupl

35、ing Characteristics impedance 50 (75 ) (type N) 1 Scope This part of IEC 61169, which is a Sectional Specification (SS), provides information and rules for the preparation of Detail Specifications (DS) for pin and socket R.F. coaxial connectors, with screw coupling mechanism, for low to medium power

36、 applications. The connector is commonly known as the “type N“. Three versions of the 50 characteristic impedance type N connector are included, each version being mateable with each of the others. The general purpose connector (grade 2) derived from the specifications MIL-C17B and MIL- C-39012 may

37、preferably be used with R.F. cable 60096 IEC 50-7 up to about 12 GHz maximum frequency. The high performance connector (grade 1) is particularly suitable for microwave applications when lower reflection factors than are offered by the general purpose connector are required. The connectors may also b

38、e suitable for microwave components. The tolerances of the interface dimensions lie between those for grade 0 and grade 2, and are chosen to give the performance required. Some grade 1 connectors conforming to this specification may be used up to 18 GHz maximum frequency. The standard test connector

39、 (grade 0) has a closely controlled interface to provide a reference for the measurement of connectors, cable assemblies, components and equipment with the above two interfaces. It may also be used as a microwave connector in situations when the most precise interface for use up to 18 GHz maximum fr

40、equency is required. A 75 characteristic impedance connector is given in Annex A even though the use of 75 type N connectors is strongly deprecated. Accidental cross-coupling of 75 with 50 connectors can destructively damage the 75 version, but in view of the extensive use of a number of marginally

41、different 75 versions, the interface now given provides common design guidance. 75 connectors should be clearly identified. This specification indicates the recommended performance characteristics to be considered when writing a DS and covers test schedules and inspection requirements. 2 Normative r

42、eferences The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-1:1988, Environmental testing

43、 Part 1: General and guidance Amendment 1 (1992) 61169-16 IEC:2006(E) 7 ) IEC 60096-2:1988, Radio-frequency cables Part 2: Relevant cable specifications IEC 61169-1:1992, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods Amendment 1 (1996) Amendment

44、2 (1997) ISO 263:1973, ISO inch screw threads General plan and selection for screws, bolts and nuts Diameter range 0.06 to 6 in 3 IEC type designation Connectors conforming to this specification shall be designated by: a) the reference to this specification: 61169-16 IEC; b) characteristic impedance

45、 50 (75 ); c) number of the grade : grade 0 = standard test connector = G 0; grade 1 = high performance connector = G 1; grade 2 = general purpose connector if grade 2 is required, no grade designation is necessary; d) a group of figures specifying the climatic category (see 7.2.5). Example: 61169-1

46、6 IEC-50-G 0 denotes a standard test connector, type N, 50 . 4 Interface dimensions 4.1 Dimensions General purpose connectors Grade 2 4.1.1 General Inch dimensions are original dimensions. NOTE The values for dimensions in millimetres derived from those in inches are not necessarily exact (according

47、 to ISO 370 1 ), but they should be considered as acceptable alternatives to the original values. All undimensioned pictorial configurations are for reference purposes only. _ 1This document has been withdrawn. 8 61169-16 IEC:2006(E) 4.1.2 Connector with pin centre contact a b c h r (Note 9) k m n f

48、 Note 5 Note 3 Note 1 Note 6 H O M H M IEC 2246/06 Figure 1 Connector with pin centre contact (for notes and dimensions, see Table 1) p Note 1 e s g q d Note 7 ab IEC 2247/06Figure 2 Details of pin centre contact (for notes and dimensions, see Table 1) 61169-16 IEC:2006(E) 9 ) Table 1 Dimensions for

49、 connector with pin centre contact mm inches Reference Min. Max. Min. Max. Note a 7,00 nom. 0,275 6 nom. 2, diam. b 8,027 0,316 3/10, diam. c 5/8-24 UNEF-2B 4 d 3,04 nom. 0,120 nom. 2, diam. e f g h k m n p q r s ab 5.33 9,25 0,0 16,0 0,41 4,013 4,5 1,600 0,15 2,79 1,57 1,52 4,267 1,676 0,1 3,56 0,64 0.210