IEC 61184-2017 Bayonet lampholders《卡口灯座》.pdf

1、 IEC 61184 Edition 4.0 2017-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Bayonet lampholders Douilles baonnette IEC 61184:2017-05(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may

2、be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry abo

3、ut obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme

4、que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publicati

5、on, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC)

6、 is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest editio

7、n, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Ma

8、c OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published

9、- webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 2

10、0 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms

11、 and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please cont

12、act the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publica

13、tions IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographi

14、ques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrent

15、s critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parue

16、s. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langues additionnelles. Eg

17、alement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures

18、 extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61184 Edition 4.0 2017-05 INTERNATIONAL STANDARD NORME INTERNATIONALE B

19、ayonet lampholders Douilles baonnette INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 29.140.10 ISBN 978-2-8322-4361-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning!

20、 Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61184:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 8

21、 3.1 Materials . 8 3.2 Means of fixing . 9 4 General requirements 13 5 General conditions for tests . 13 6 Standard ratings 14 6.1 Standard rated voltage 14 6.2 Standard rated currents 15 7 Classification . 15 8 Marking . 16 9 Dimensions 18 10 Protection against electric shock . 19 11 Terminals 20 1

22、2 Provision for earthing 22 13 Construction 24 14 Switched lampholders 28 15 Moisture resistance, insulation resistance and electrical strength 29 16 Mechanical strength 31 17 Screws, current-carrying parts and connections . 34 18 Creepage distances and clearances 35 19 General resistance to heat .

23、37 20 Resistance to heat, fire and tracking 41 21 Resistance to excessive residual stresses (season cracking) and to rusting 43 Annex A (normative) Season cracking/corrosion test . 61 A.1 General . 61 A.2 Test cabinet 61 A.3 Test solution . 61 A.4 Test procedure 62 Annex B (informative) Schedule of

24、amended clauses and subclauses containing more serious/critical requirements which require products to be retested . 63 Bibliography 64 Figure 1 Loading device (see 16.1) 44 Figure 2 Bending apparatus (see 16.4) 45 Figure 3 Gauge for holes for backplate lampholders screws (see 13.11) 46 Figure 4 Cla

25、rification of some of the definitions in Clause 3 . 47 Figure 5 Test cap B15d (see 19.3) . 48 Figure 6 Test cap B22d (see 19.3) . 49 Figure 7 Testing device (see 10.1) . 50 IEC 61184:2017 IEC 2017 3 Figure 8 Dimensions for shade support devices (see 9.1) 51 Figure 9 Dimensions for protective shields

26、 for B22d lampholders (see 10.1) 52 Figure 10 Test cap B15d (see 15.3) . 53 Figure 11 Test cap B22d (see 15.3) . 54 Figure 12 Typical apparatus for the heating test (see 19.5) 56 Figure 13 Nipple thread for lampholders Basic profile and design profile for the nut and for the screw 56 Figure 14 Gauge

27、s for metric thread for nipples 57 Figure 15 Impact-test apparatus 58 Figure 16 Mounting support . 59 Figure 17 Ball-pressure test apparatus. 59 Figure 18 Pressure apparatus 60 Table 1 Dimensions of threaded entries and set screws . 19 Table 2 Minimum dimensions of pillar type terminals 21 Table 3 L

28、imits for contact forces 24 Table 4 Pull and torque values . 27 Table 5 Heights of fall 33 Table 6 Maximum deformation values 34 Table 7 Torque values . 35 Table 8 Minimum distances for AC (50/60 Hz) sinusoidal voltages Impulse withstand category II . 36 Table 9 Heating cabinet temperature . 37 Tabl

29、e 10 Heating cabinet temperature . 38 Table 11 Test temperature and test lamp data . 40 Table A.1 pH adjustment 61 4 IEC 61184:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ BAYONET LAMPHOLDERS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for

30、 standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publish

31、es International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may par

32、ticipate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement

33、between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Public

34、ations have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or fo

35、r any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the correspon

36、ding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any

37、services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC

38、 National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attent

39、ion is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC

40、 shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61184 has been prepared by subcommittee 34B: Lamp caps and holders, of IEC technical committee 34: Lamps and related equipment. This fourth edition cancels and replaces the third edition publishe

41、d in 2008 and Amendment 1:2011. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Restructuring of the standard in accordance with IEC Directives Part 2. b) Clause 18: Update on creepage distances

42、 and clearances; c) Addition of Annex B. The text of this standard is based on the following documents: FDIS Report on voting 34B/1898/FDIS 34B/1905/RVD IEC 61184:2017 IEC 2017 5 Full information on the voting for the approval of this standard can be found in the report on voting indicated in the ab

43、ove table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard, the following print types are used: requirements proper: in roman type; test specifications: in italic type; notes: in small roman type. The committee has decided that the contents of th

44、e base publication and its amendments will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6

45、 IEC 61184:2017 IEC 2017 INTRODUCTION This document covers safety requirements for bayonet lampholders and includes references to IEC 60061 (all parts) for the control of interchangeability and safety of the cap and holder fit. NOTE Safety requirements ensure that electrical equipment constructed in

46、 accordance with these requirements does not endanger the safety of persons, domestic animals or property when properly installed and maintained and used in applications for which it was intended. The thermal characteristics of lampholders are specified by the rated operating temperature (symbol T),

47、 which is the highest temperature for which the lampholder is designed. The temperature rating and the resistance to heat specified in this document are based on two different principles, as presently found in IEC 60238 for Edison screw lampholders and in other national standards for bayonet lamphol

48、ders. After experience, it may be possible to rationalize the systems in future editions of this document. IEC 61184:2017 IEC 2017 7 BAYONET LAMPHOLDERS 1 Scope This document applies to bayonet lampholders B15d and B22d for connection of lamps and semi-luminaires to a supply voltage of 250 V. This d

49、ocument also covers lampholders which are integral with a luminaire or intended to be built into appliances. It covers the requirements for the lampholder only. For all other requirements, such as protection against electric shock in the area of the terminals, the requirements of the relevant appliance standard are observed and tested after building into the appropriate equip