IEC 61196-10-2014 Coaxial communication cables - Part 10 Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric《同轴通信电缆 第10部分 带有聚四氟乙烯 (PTFE) 介质的半刚性电缆的分规格》.pdf

1、 IEC 61196-10 Edition 1.0 2014-09 INTERNATIONAL STANDARD Coaxial communication cables Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric IEC 61196-10:2014-09(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rig

2、hts reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the reque

3、ster. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 9

4、19 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The te

5、chnical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical inf

6、ormation on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number

7、, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by e

8、mail. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IE

9、V) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR.

10、IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61196-10 Edition 1.0 2014-09 INTERNATIONAL STANDARD Coaxial communication cables Part 10: Sectional specif

11、ication for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric INTERNATIONAL ELECTROTECHNICAL COMMISSION Q ICS 33.120.10 PRICE CODE ISBN 978-2-8322-1866-2 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an

12、 authorized distributor. 2 IEC 61196-10:2014 IEC 2014 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 6 4 Materials and cable construction . 6 4.1 Cable construction 6 4.2 Inner conductor . 6 4.3 Dielectric 7 4.4 Outer conductor 7 4.5 Sheath (when applicable) 7 5 Sta

13、ndard rating and characteristics 7 5.1 Characteristic impendence 7 5.2 Rated temperature range 7 6 Identification, marking and labeling 8 6.1 Cable identification . 8 6.1.1 Type name 8 6.1.2 Variants . 8 6.2 IEC marking 8 6.3 Labelling . 8 7 Requirements of finished cables 8 7.1 General . 8 7.2 Elec

14、trical requirements (see Table 1) 8 7.3 Environmental requirements (see Table 2) 10 7.4 Mechanical requirements (see Table 3) . 10 8 Delivery and storage 11 Annex A (informative) Quality assessment . 12 A.1 General . 12 A.2 Qualification approval and its maintenance . 12 A.2.2 Capability approval 14

15、 A.2.3 Quality conformance inspection . 14 A.2.4 Periodic inspection 16 Bibliography 17 Table 1 Electrical requirements 9 Table 2 Environmental requirements 10 Table 3 Mechanical requirements. 10 Table A.1 Qualification inspection 13 Table A.2 Quality conformance inspection . 15 IEC 61196-10:2014 IE

16、C 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COAXIAL COMMUNICATION CABLES Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comp

17、rising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Stan

18、dards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prep

19、aratory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organ

20、izations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form

21、of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretati

22、on by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regi

23、onal publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out

24、by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees

25、for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the N

26、ormative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held re

27、sponsible for identifying any or all such patent rights. International Standard IEC 61196-10 has been prepared by subcommittee 46A: Coaxial cables, of IEC technical committee 46: Cables, wires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories. The text of this stand

28、ard is based on the following documents: FDIS Report on voting 46A/1213/FDIS 46A/1232/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, P

29、art 2. 4 IEC 61196-10:2014 IEC 2014 This publication is to be read in conjunction with IEC 61196-1:2005. A list of all parts in the IEC 61196 series, published under the general title Coaxial communication cables, can be found on the IEC website. The committee has decided that the contents of this p

30、ublication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this

31、publication may be issued at a later date. IEC 61196-10:2014 IEC 2014 5 COAXIAL COMMUNICATION CABLES Part 10: Sectional specification for semi-rigid cables with polytetrafluoroethylene (PTFE) dielectric 1 Scope This part of IEC 61196 applies to semi-rigid coaxial communication cables with polytetraf

32、luoroethylene (PTFE) dielectric and tubular outer conductor. These cables are intended for use in microwave and wireless equipments or other signal transmission equipments or units at frequencies above 500 MHz. It is to be read in conjunction with IEC 61196-1:2005. 2 Normative references The followi

33、ng documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-1:1988,

34、Environmental testing Part 1: General and guidance IEC 60068-1:1988/AMD 1:1992 IEC 61169-4, Radio-frequency connectors Part 4: RF coaxial connectors with inner diameter of outer conductor 16 mm (0,63 in) with screw lock Characteristic impedance 50 (type 7-16) IEC 61196-1:2005, Coaxial communication

35、cables Part 1: Generic specification General, definitions and requirements IEC 61196-1-1, Coaxial communication cables Part 1-1: Capability approval for coaxial cables IEC 61196-1-101, Coaxial communication cables Part 1-101: Electrical test methods Test for conductor d.c. resistance of cable IEC 61

36、196-1-102, Coaxial communication cables Part 1-102: Electrical test methods Test for insulation resistance of cable dielectric IEC 61196-1-103, Coaxial communication cables Part 1-103: Electrical test methods Test for capacitance of cable IEC 61196-1-105, Coaxial communication cables Part 1-105: Ele

37、ctrical test methods Test for withstand voltage of cable dielectric IEC 61196-1-108, Coaxial communication cables Part 1-108: Electrical test methods Test for characteristic impedance, phase and group delay, electrical length and propagation velocity IEC 61196-1-112, Coaxial communication cables Par

38、t 1-112: Electrical test methods Test for return loss (uniformity of impedance) 6 IEC 61196-10:2014 IEC 2014 IEC 61196-1-113, Coaxial communication cables Part 1-113: Electrical test methods Test for attenuation constant IEC 61196-1-115, Coaxial communication cables Part 1-115: Electrical test metho

39、ds Test for regularity of impedance (pulse/step function return loss) IEC 61196-1-301, Coaxial communication cables Part 1-301: Mechanical test methods Test for ovality IEC 61196-1-302, Coaxial communication cables Part 1-302: Mechanical test methods Test for eccentricity IEC 61196-1-313, Coaxial co

40、mmunication cables Part 1-313: Mechanical test methods Adhesion of dielectric and sheath IEC 61196-1-314, Coaxial communication cables Part 1-314: Mechanical test methods : Test for bending IEC 61196-1-318, Coaxial communication cables Part 1-318: Mechanical test methods Heat performance tests IEC 6

41、2037-4:2012, Passive RF and microwave devices, intermodulation level measurement Part 4: Measurement of passive intermodulation in coaxial cables IEC 62230:2006, Electric cables Spark-test method ISO 2859-1:1999, Sampling procedures for inspection by attributes Part 1: Sampling schemes indexed by ac

42、ceptance quality limit (AQL) for lot-by-lot inspection 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 61196-1 as well as the following apply. 3.1 semi-rigid coaxial communication cable coaxial line, not intended to be bent or flexed in service or no

43、t intended to be flexed after initial forming Note 1 to entry: Any bending or flexing during installation or use may degrade the performance of cable. It is not intended to be bent after installation. Note 2 to entry: The typical construction for this type of cables is a solid metallic core as inner

44、 conductor, polytetrafluoroethylene (PTFE) dielectric and a seamless copper or other metallic tubing outer conductor. 4 Materials and cable construction 4.1 Cable construction The cable construction shall be in accordance with 4.2 to 4.5 of this standard and the requirements stated in the relevant d

45、etail specification. 4.2 Inner conductor The inner conductor shall be in accordance with 4.4.1 of IEC 61196-1:2005. IEC 61196-10:2014 IEC 2014 7 The nominal diameter shall be stated in the relevant detail specification. The tolerance of the diameter shall be 3 %. The inner conductor shall be smooth

46、and continuous. 4.3 Dielectric The construction of the dielectric shall be one of the materials listed below or a combination of the following: solid polytetrafluoroethylene (PTFE) dielectric; low-density polytetrafluoroethylene (PTFE) dielectric; or any other appropriate PTFE type material as state

47、d in the relevant detail specification. The nominal diameter and thickness shall be stated in the relevant detail specification. The tolerance shall be 3 %. 4.4 Outer conductor The outer conductor shall be a copper or aluminum tube with or without coating. The coating material and thickness shall be

48、 stated in the relevant detail specification. The nominal diameter of outer conductor shall be stated in the relevant detail specification. The tolerance of the diameter shall be 1 %. The corrugated outer conductor shall be smooth and continuous. 4.5 Sheath (when applicable) The sheath of a cable is

49、 optional and shall be in accordance with 4.7 of IEC 61196-1:2005 with the following amendments and additions. The outer sheath of a cable shall be a thermoplastic material as specified in the relevant detail specification, including the material type. The nominal sheath thickness shall be stated in the relevant detail specification. The nominal diameter of the sheath shall be stated in the relevant detail specification.