IEC 61202-1-2016 Fibre optic interconnecting devices and passive components - Fibre optic isolators - Part 1 Generic specification《光纤连接器和无源元件.光纤绝缘体.第1部分 总要求》.pdf

1、 IEC 61202-1 Edition 4.0 2016-12 INTERNATIONAL STANDARD Fibre optic interconnecting devices and passive components Fibre optic isolators Part 1: Generic specification IEC 61202-1:2016-12(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights rese

2、rved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If

3、 you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00

4、 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical

5、content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information

6、 on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text,

7、technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. El

8、ectropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glo

9、ssary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre

10、 webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61202-1 Edition 4.0 2016-12 INTERNATIONAL STANDARD Fibre optic interconnecting devices and passive components Fibre optic isolators Pa

11、rt 1: Generic specification INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.180.20 ISBN 978-2-8322-3681-9 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 61202-1:2016 IEC

12、2016 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 7 3.1 Basic terms and definitions . 7 3.2 Component terms and definitions 7 3.3 Performance parameter terms and definitions . 8 4 Requirements 10 4.1 Classification 10 4.1.1 General . 10 4.1.2 Type 10 4.1.3 Style 1

13、1 4.1.4 Variant . 11 4.1.5 Normative reference extensions. 11 4.2 Documentation 12 4.2.1 Symbols 12 4.2.2 Specification system 12 4.2.3 Drawings . 13 4.2.4 Tests and measurements . 13 4.2.5 Test data sheets 14 4.2.6 Instructions for use 14 4.3 Standardization system . 14 4.3.1 Interface standards 14

14、 4.3.2 Performance standards 14 4.3.3 Reliability standards 14 4.3.4 Interlinking . 15 4.4 Design and construction 16 4.4.1 Materials . 16 4.4.2 Workmanship . 16 4.5 Performance requirements 16 4.6 Identification and marking . 17 4.6.1 General . 17 4.6.2 Variant identification number . 17 4.6.3 Comp

15、onent marking . 17 4.6.4 Package marking . 17 4.7 Packaging . 18 4.8 Storage conditions 18 4.9 Safety . 18 (informative) Example of technology of bulk isolator based on magneto-optic Annex A effect . 19 A.1 General . 19 A.2 Faraday rotator . 19 A.3 Analyser . 19 A.4 Birefringent crystal 19 IEC 61202

16、1:2016 IEC 2016 3 (informative) Example of technology of optical waveguide isolator . 22 Annex B B.1 General . 22 B.2 TE mode . 22 B.3 TM mode 22 Bibliography 24 Figure 1 Configuration A Device containing integral fibre optic pigtails without connector 11 Figure 2 Configuration B Device containing

17、integral fibre optic pigtails, with a connector on each pigtail 11 Figure 3 Configuration C Device containing connectors as an integral part of the device housing 11 Figure 4 Configuration D Device containing some combination of the interfacing features of the preceding configurations . 11 Figure 5

18、Standards currently under preparation . 16 Figure A.1 Polarization dependent optical isolator 20 Figure A.2 Polarization independent optical isolator . 21 Figure B.1 Mode conversion type of the optical waveguide isolator 22 Figure B.2 Phase shifter type of the optical waveguide isolator 23 Figure B.

19、3 TE mode and TM mode for optical waveguide isolator 23 Table 1 Two-level IEC specification structure . 12 Table 2 Standards interlink matrix 16 4 IEC 61202-1:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC ISOLATORS Pa

20、rt 1: Generic specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions conce

21、rning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Thei

22、r preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates c

23、losely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the rel

24、evant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the

25、 technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximu

26、m extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies pr

27、ovide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC o

28、r its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expen

29、ses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Atten

30、tion is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61202-1 has been prepared by subcommittee 86B: Fibre optic interconnecti

31、ng devices and passive components, of IEC technical committee 86: Fibre optics. This fourth edition cancels and replaces the third edition published in 2009. It constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a

32、) the terms and definitions were reconsidered; b) quality assessment level was deleted from classification; c) the clause numbers of Annexes A and B have been rearranged. IEC 61202-1:2016 IEC 2016 5 The text of this International Standard is based on the following documents: CDV Report on voting 86B

33、/3989A/CDV 86B/4033RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61202 series, publ

34、ished under the general title Fibre optic interconnecting devices and passive components Fibre optic isolators, can be found on the IEC website. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates tha

35、t it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 IEC 61202-1:2016 IEC 2016 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC ISOLATORS Part 1: Generic speci

36、fication 1 Scope This part of IEC 61202 applies to isolators used in the field of fibre optics, all exhibiting the following features: they are non-reciprocal optical devices, in which each port is either an optical fibre or fibre optic connector; they are passive devices containing no opto-electron

37、ic or other transducing elements; they have two optical ports for directionally transmitting optical power. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only

38、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60027 (all parts), Letter symbols to be used in electrical technology IEC 60050-731, International Electrotechnical Vocabulary Chapter 731: Optical fibre communic

39、ation IEC 60617 (all parts), Graphical symbols for diagrams (available at http:/std.iec.ch/iec60617) IEC 60695 (all parts), Fire hazard testing IEC 60825-1, Safety of laser products Part 1: Equipment classification and requirements IEC 61300 (all parts), Fibre optic interconnecting devices and passi

40、ve components Basic test and measurement procedures IEC TS 62627-09, Fibre optic interconnecting devices and passive components Vocabulary for passive optical devices ISO 129-1, Technical drawings Indication of dimensions and tolerances Part 1: General principles ISO 286-1, Geometrical product speci

41、fication (GPS) ISO code system for tolerances on linear sizes Part 1: Bases of tolerances, deviations and fits ISO 1101, Geometrical product specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out ISO 8601, Data elements and interchange formats Information

42、interchange Representation of dates and times IEC 61202-1:2016 IEC 2016 7 3 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 60050-731, IEC TS 62627-09 and the following apply. ISO and IEC maintain terminological databases for use in standardization at

43、the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 Basic terms and definitions 3.1.1 port optical fibre or fibre optic connector attached to a passive component for the entry and/or exit of the opti

44、cal power 3.1.2 input port port for the entry of optical power Note 1 to entry: An isolator is a directional device. The input port should be clearly marked. 3.1.3 output port port for the exit of optical power Note 1 to entry: An isolator is a directional device. The output port should be clearly m

45、arked. 3.1.4 backward direction operational direction in which the power of the optical source launches into the output port of an isolator Note 1 to entry: This is the direction of optical power isolation. 3.1.5 forward direction operational direction in which the power of the optical source launch

46、es into the input port of an isolator Note 1 to entry: This is the intentional direction of optical power transmission. 3.2 Component terms and definitions 3.2.1 fibre optic isolator non-reciprocal optical device intended to suppress backward reflections along an optical fibre transmission line whil

47、e having minimum insertion loss in the forward direction Note 1 to entry: Fibre optic isolators are commonly used to avoid reflections back into laser diodes and optical amplifiers, which can make the laser and amplifiers oscillations unstable, and cause noise in the fibre optic transmission system.

48、 3.2.2 bulk isolator based on magneto-optic effect type of isolator with discrete components including a suitable magneto-optic crystal (ferro- magnetic crystal or paramagnetic glass, diamagnetic glass, etc.), of which the fundamental principle is based on magneto-optic effect 8 IEC 61202-1:2016 IEC

49、 2016 Note 1 to entry: The technology of a bulk isolator based on magneto-optic effect is described in Annex A. 3.2.3 in-line isolator type of isolator with optical fibre for the entry input and output of the light 3.2.4 optical waveguide isolator type of isolator with planer epitaxial magneto-optic crystal layers on a suitable substrate Note 1 to entry: The technology of an optical waveguide isolator is described in Annex B. 3.2.5 polari