IEC 61260-1-2014 IEC 61260-1 Electroacoustics - Octave-band and fractional-octave-band filters - Part 1 Specifications《IEC 61260-1 电声学.分倍频程和频程频带滤波器.第1部分 规格》.pdf

1、 IEC 61260-1 Edition 1.0 2014-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Electroacoustics Octave-band and fractional-octave-band filters Part 1: Specifications lectroacoustique Filtres de bande doctave et de bande dune fraction doctave Partie 1: Spcifications IEC 61260-1:2014-02(EN-FR) THIS PUBL

2、ICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing

3、 from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further informa

4、tion. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national d

5、e lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, r

6、ue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Abo

7、ut IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the

8、entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of

9、criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online

10、and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Elect

11、rotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC

12、 TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire

13、organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus

14、 rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour

15、PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications rempla

16、ces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en lign

17、e de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55

18、000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous ds

19、irez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61260-1 Edition 1.0 2014-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Electroacoustics Octave-band and fractional-octave-band filters Part 1: Specifications lectroacoustique Filtres

20、 de bande doctave et de bande dune fraction doctave Partie 1: Spcifications INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 17.140.50 PRICE CODE CODE PRIX ISBN 978-2-8322-1417-6 Registered trademark of the International Electrotechnical Commission Marque dp

21、ose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61260-1 IEC:2014 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scop

22、e 7 2 Normative references. 7 3 Terms and definitions 8 4 Reference environmental conditions . 12 5 Performance requirements . 12 5.1 General 12 5.2 Octave frequency ratio . 13 5.3 Reference frequency 13 5.4 Exact mid-band frequencies . 13 5.5 Nominal mid-band frequencies 13 5.6 Band-edge frequencie

23、s . 14 5.7 Time-averaged signal levels . 14 5.8 Filter attenuation 14 5.9 Reference attenuation 15 5.10 Relative attenuation . 15 5.11 Normalized effective bandwidth 18 5.12 Effective bandwidth deviation . 19 5.13 Linear operating range . 19 5.14 Time-invariant operation . 20 5.15 Anti-alias filters

24、 20 5.16 Summation of output signals . 21 5.17 Overload indicator 21 5.18 Filter decay time. 21 5.19 Maximum input signal . 21 5.20 Output terminals and terminating impedances . 22 5.21 Power supply check . 22 5.22 Sensitivity to various environments . 22 General . 22 5.22.1Ambient air temperature a

25、nd relative humidity 22 5.22.2 5.23 Electrostatic-discharge and electromagnetic-compatibility requirements 22 General . 22 5.23.1Electrostatic discharges . 23 5.23.2Immunity to power-frequency and radio-frequency fields 23 5.23.3Emission limits 25 5.23.4 6 Instrument marking 25 7 Instruction manual

26、. 26 7.1 General 26 7.2 Operation . 26 7.3 Testing . 27 Annex A (informative) Relationship between tolerance interval, corresponding acceptance interval and the maximum-permitted uncertainty of measurement 28 Annex B (normative) Maximum-permitted expanded uncertainties of measurement . 29 Annex C (i

27、nformative) Examples of conformance assessment to specifications of this standard . 30 61260-1 IEC:2014 3 C.1 General 30 C.2 Conformance criteria 30 C.3 Example test results . 31 Annex D (informative) Base 2 filters . 33 Annex E (normative) Nominal mid-band frequencies . 34 E.1 Mid-band frequencies

28、for octave-band and one-third-octave-band filters 34 E.2 Mid-band frequencies for one-half-octave-band filters . 34 E.3 Mid-band frequencies for other bandwidths . 34 Annex F (informative) Normalized frequencies at breakpoints of acceptance limits on minimum and maximum relative attenuation for one-

29、third-octave-band filters 36 Annex G (informative) Filter response to exponentially swept sinusoidal signals 38 G.1 Exponential frequency sweep . 38 G.2 Response of set of band-pass filters to a sweep 38 Annex H (informative) Measurement of filter decay time 41 H.1 General 41 H.2 Measurement of filt

30、er decay time 41 H.2.1 Instruments with the capability to measure reverberation time 41 H.2.2 Instruments without the capability to measure reverberation time 41 Bibliography . 43 Figure 1 Minimum and maximum limits on relative attenuation as a function of f/f mfor class 1 and class 2 octave-band fi

31、lters . 17 Figure A.1 Relationship between tolerance interval, corresponding acceptance interval and the maximum-permitted uncertainty of measurement . 28 Figure C.1 Examples of conformance assessment 32 Figure G.1 Relation between the logarithmic frequency scale and the linear time scale due to the

32、 exponential sweep . 40 Table 1 Acceptance limits on relative attenuation for octave-band filters . 15 Table 2 Limits for radiated disturbance of class B Information Technology Equipment (ITE) at a distance of 10 m 25 Table 3 Limits for conducted disturbance to the voltage of a public supply of elec

33、tric power . 25 Table B.1 Maximum-permitted expanded uncertainties of measurement 29 Table C.1 Examples of conformance assessment . 31 Table E.1 Mid-band frequencies for octave-band and one-third-octave-band filters in the audio range 35 Table F.1 Acceptance limits on relative attenuation for one-th

34、ird-octave-band filters 37 4 61260-1 IEC:2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROACOUSTICS OCTAVE-BAND AND FRACTIONAL-OCTAVE-BAND FILTERS Part 1: Specifications FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising

35、all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards,

36、Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory

37、 work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organization

38、s. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of reco

39、mmendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by a

40、ny end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional pu

41、blication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by inde

42、pendent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any

43、 personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normativ

44、e references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsib

45、le for identifying any or all such patent rights. International Standard IEC 61260-1 has been prepared by IEC technical committee 29: Electroacoustics. This first edition of IEC 61260-1, future IEC 61260-2 and future IEC 61260-3, cancel and replace the first edition of IEC 61260 published in 1995, a

46、nd Amendment 1:2001. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the IEC 61260: a) the single document in the first edition of IEC 61260:1995 is in IEC 61260 series separated into the three parts covering: specifica

47、tions, pattern evaluation tests and periodic tests; b) the IEC 61260:1995 specified three performance categories: classes 0, 1 and 2. The IEC 61260 series specifies requirements for class 1 and 2; c) in the IEC 61260:1995, the design goals for the specification can be based on base-2 or base 10 desi

48、gn. In IEC 61260 series only base-10 is specified; 61260-1 IEC:2014 5 d) the reference environmental conditions have been changed from 20 C / 65 % RH to 23 C / 50 % RH; e) IEC 61260:1995 specified tolerance limits without considering the uncertainty of measurement for verification of the specificati

49、ons. IEC 61260 series specifies acceptance limits for the observed values and maximum-permitted uncertainty of measurements for laboratories testing conformance to specifications in the standard. The text of this standard is based on the following documents: FDIS Report on voting 29/835/FDIS 29/839/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in th