1、 IEC 61340-5-1 Edition 2.0 2016-05 REDLINE VERSION Electrostatics Part 5-1: Protection of electronic devices from electrostatic phenomena General requirements IEC 61340-5-1:2016-05 RLV(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserv
2、ed. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If y
3、ou have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 C
4、H-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical co
5、ntent of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information o
6、n IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, te
7、chnical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Elec
8、tropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Gloss
9、ary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre -
10、webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61340-5-1 Edition 2.0 2016-05 REDLINE VERSION Electrostatics Part 5-1: Protection of electronic devices from electrostatic phenomena Gen
11、eral requirements INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 17.220.99; 29.020 ISBN 978-2-8322-3443-3 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 61340-5-1:2016 RLV
12、IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 7 2 Normative references. 7 3 Terms and definitions 8 4 Personnel safety 10 5 ESD control program . 10 5.1 General . 10 5.1.1 ESD control program requirements . 10 5.1.2 ESD coordinator . 10 5.1.3 Tailoring 10 5.2 ESD control program administra
13、tive requirements 11 5.2.1 ESD control program plan 11 5.2.2 Training plan 11 5.2.3 Product qualification . 11 5.2.4 Compliance verification plan . 12 5.3 ESD control program plan technical requirements 12 5.3.1 General . 12 5.3.2 Grounding/equipotential bonding systems . 12 5.3.3 Personnel groundin
14、g 14 5.3.4 ESD protected areas (EPA) 16 5.3.5 Packaging 19 5.3.6 Marking . 19 Annex A (normative) Test methods . 20 Bibliography . 22 Figure 1 Schematic of an EPA with a ground reference . 13 Figure 2 Schematic of an equipotential bonding system 14 Figure A.1 Wrist strap testing Figure A.1 Footwear
15、functional testing (example) 21 Table 1 Grounding/bonding requirements . 14 Table 2 Personnel grounding requirements . 15 Table 3 EPA requirements . 18 Table 4 Packaging IEC 61340-5-1:2016 RLV IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROSTATICS Part 5-1: Protection of electronic de
16、vices from electrostatic phenomena General requirements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-oper
17、ation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as
18、 “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this pre
19、paration. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international con
20、sensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts
21、 are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications
22、 transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Indepen
23、dent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No lia
24、bility shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (inc
25、luding legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application o
26、f this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. DISCLAIMER This Redline version is not an official IEC Standard and is
27、intended only to provide the user with an indication of what changes have been made to the previous version. Only the current version of the standard is to be considered the official document. This Redline version provides you with a quick and easy way to compare all the changes between this standar
28、d and its previous edition. A vertical bar appears in the margin wherever a change has been made. Additions are in green text, deletions are in strikethrough red text. 4 IEC 61340-5-1:2016 RLV IEC 2016 International Standard IEC 61340-5-1 has been prepared by IEC technical committee 101: Electrostat
29、ics. This second edition cancels and replaces the first edition published in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Technical requirements were changed to align IEC 61340-5-1 with
30、 other industry ESD standards; b) Reference documents were updated to reflect newly released IEC standards; c) A section on product qualification was added; d) Table 4 was deleted and detailed packaging requirements were deferred to IEC 6134053; e) Clause A.1 was removed and is now included in IEC 6
31、1340-4-6. The text of this standard is based on the following documents: FDIS Report on voting 101/505/FDIS 101/508/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance
32、with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61340 series, published under the general title Electrostatics, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web
33、site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The “colour inside” logo on the cover page of this publication indicates that it contains colours whi
34、ch are considered to be useful for the correct understanding of its contents. Users should therefore print this publication using a colour printer. IEC 61340-5-1:2016 RLV IEC 2016 5 INTRODUCTION This part of IEC 61340 covers the requirements necessary to design, establish, implement and maintain an
35、electrostatic discharge (ESD) control program for activities that: manufacture, process, assemble, install, package, label, service, test, inspect, transport or otherwise handle electrical or electronic parts, assemblies and equipment susceptible to damage by electrostatic discharges greater than or
36、 equal to 100 V human body model (HBM), 200 V charged device model (CDM) and 35 V on isolated conductors. Isolated conductors were historically represented by machine model (MM). The 35 V limit is related to the level achievable using ionizers specified in this standard. The MM test is no longer req
37、uired for qualification of devices, only the HBM and CDM tests are. The MM test is retained in this standard for process control of isolated conductors only. Any contact and physical separation of materials or flow of solids, liquids, or particle-laden gases can generate electrostatic charges. Commo
38、n sources of ESD include charged: personnel, conductors, common polymeric materials, and processing equipment. ESD damage can occur when: a charged person or object comes into contact with an ESD sensitive device (ESDS); an ESDS comes into direct contact with a highly conductive surface while expose
39、d to an electrostatic field; a charged ESDS comes into contact with another conductive surface which is at a different electrical potential. This surface may or may not be grounded. Examples of ESDS are microcircuits, discrete semiconductors, thick and thin film resistors, hybrid devices, printed ci
40、rcuit boards and piezoelectric crystals. It is possible to determine device and item susceptibility by exposing the device to simulated ESD events. The ESD withstand voltage determined by sensitivity tests using simulated ESD events does not necessarily represent the ability of the device to withsta
41、nd ESD from real sources at that voltage level. However, the levels of sensitivity are used to establish a baseline of susceptibility data for comparison of devices with equivalent part numbers from different manufacturers. Three different models have been used for qualification of electronic compon
42、ents human body model (HBM), machine model (MM), and charged device model (CDM). In current practice devices are qualified only using HBM and CDM susceptibility tests. This standard covers the ESD control program requirements necessary for setting up a program to handle ESDS, based on the historical
43、 experience of both military and commercial organizations. The fundamental ESD control principles that form the basis of this standard are as follows. Avoid a discharge from any charged, conductive object (personnel and especially automated handling equipment) into the ESDS. This can be accomplished
44、 by bonding or electrically connecting all conductors in the environment, including personnel, to a known ground or contrived ground (as on board ship or on aircraft). This attachment creates an equipotential balance between all conducting objects and personnel. Electrostatic protection can be maint
45、ained at a potential different from a “zero” voltage ground potential as long as all conductive objects in the system are at the same potential. Avoid a discharge from any charged ESD sensitive device. Charging can result from direct contact and separation or it can be induced by an electric field.
46、Necessary insulators in the environment cannot lose their electrostatic charge by attachment to ground. Ionization systems provide neutralization of charges on these necessary insulators (circuit board materials and some device packages are examples of necessary insulators). Assessment of The ESD ha
47、zard created by electrostatic charges on the necessary insulators in the work place is required assessed to ensure that appropriate actions are implemented, according to the risk. Once outside of an electrostatic discharge protected area (hereinafter referred to as an EPA) it is often generally not
48、possible to control the above items, therefore, ESD protective packaging may be required. ESD protection can be achieved by enclosing ESD sensitive products in static protective materials, although the type of material depends on 6 IEC 61340-5-1:2016 RLV IEC 2016 the situation and destination. Insid
49、e an EPA, static dissipative materials may provide adequate protection. Outside an EPA, static discharge shielding materials are recommended. Whilst all of these materials are not discussed in this standard, it is important to recognize the differences in their application. For more information see IEC 61340-5-3. Each company has different processes, and so will require a different blend of ESD prevention measures for an optimum ESD control program. It is vital that these Measures are sh
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1