1、 IEC 61439-4 Edition 1.0 2012-11 INTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS) Ensembles dappareillage basse tension Partie 4: Exigences particulires pour ensembles de chantier
2、s (EC) IEC61439-4:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfil
3、m, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member Nation
4、al Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord cri
5、t de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Ce
6、ntral Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical,
7、electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.c
8、h/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC
9、publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, w
10、ith equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csci
11、ec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des
12、publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant
13、 diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles pub
14、lications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents da
15、ns les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61439-4 Edition 1.0 2012-11 I
16、NTERNATIONAL STANDARD NORME INTERNATIONALE Low-voltage switchgear and controlgear assemblies Part 4: Particular requirements for assemblies for construction sites (ACS) Ensembles dappareillage basse tension Partie 4: Exigences particulires pour ensembles de chantiers (EC) INTERNATIONAL ELECTROTECHNI
17、CAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE U ICS 29.130.20 PRICE CODE CODE PRIX ISBN 978-2-83220-466-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publicat
18、ion from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61439-4 IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 6 4 Symbols and abbreviations . 8 5 Interface characteristics
19、 . 8 6 Information . 9 7 Service conditions 10 8 Constructional requirements . 11 9 Performance requirements . 13 10 Design verification 13 11 Routine verification . 16 101 Particular features of ACS 16 Annexes . 19 Annex C (informative) User information template . 19 Annex D (informative) Design ve
20、rification 20 Annex O (informative) Guidance on temperature rise verification . 21 Annex P (normative) Verification of the short-circuit withstand strength of busbar structures by comparison with a tested reference design by calculation . 22 Annex AA (informative) List of notes concerning certain co
21、untries . 23 Annex BB (Void) . 24 Annex CC (informative) Items subject to agreement between the ASSEMBLY manufacturer and the user 25 Bibliography 29 Figure 101 Impact test using striking element 15 Table 101 Values of assumed loading 18 Table D.1 List of design verifications to be performed 20 Tabl
22、e CC.1 Items subject to agreement between the ASSEMBLY manufacturer and the user 25 61439-4 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES Part 4: Particular requirements for assemblies for construction sites (ACS) FOREWORD 1) The Internation
23、al Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic
24、fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any
25、 IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardi
26、zation (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has repres
27、entation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC
28、cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publica
29、tions. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas,
30、 access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including
31、 individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance
32、upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elemen
33、ts of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61439-4 has been prepared by subcommittee 17D: Low-voltage switchgear and controlgear assemblies, of IEC technical committee 17:
34、 Switchgear and controlgear. This first edition of IEC 61439-4 cancels and replaces the second edition of IEC 60439-4 (2004), and constitutes a technical revision. This edition includes the following significant technical changes with respect to the last edition of IEC 60439-4: modification of the t
35、itle as “Part 4: Particular requirements for assemblies for construction sites (ACS)” alignment on IEC 61439-1 regarding the structure and technical content, as applicable; to allow comparison with tested ACS. 4 61439-4 IEC:2012 The text of this standard is based on the following documents: FDIS Rep
36、ort on voting 17D/460/FDIS 17D/469/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This standard is to be read in conjunction w
37、ith IEC 61439-1. The provisions of the general rules dealt with in IEC 61439-1 (hereinafter referred to as Part 1) are only applicable to this standard insofar as they are specifically cited. When this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be
38、adapted accordingly. Subclauses that are numbered with a 101 (102, 103, etc.) suffix are additional to the same subclause in Part 1. Tables and figures in this Part 4 that are new are numbered starting with 101. New annexes in this Part 4 are lettered AA, BB, etc. In this standard, terms written in
39、small capitals are defined in Clause 3. The readers attention is drawn to the fact that Annex AA lists all of the “in-some-country” clauses on differing practices of a less permanent nature relating to the subject of this standard. A list of all parts of the IEC 61439 series, under the general title
40、 Low-voltage switchgear and controlgear assemblies, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publicat
41、ion. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61439-4 IEC:2012 5 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR ASSEMBLIES Part 4: Particular requirements for assemblies for construction sites (ACS) 1 Scope NOTE Throughout this standard, the ab
42、breviation ACS (ASSEMBLY for construction site, see 3.1.101) is used for a low-voltage switchgear and controlgear assembly intended for use on construction and similar sites. This part of 61439 defines the specific requirements of ACS as follows: ASSEMBLIES for which the rated voltage does not excee
43、d 1 000 V in case of a.c. or 1 500 V in case of d.c.; ASSEMBLIES where the nominal primary voltage and the nominal secondary voltage of transformers incorporated in ACS are within the limits specified above; ASSEMBLIES intended for use on construction sites, both indoors and outdoors, i.e. temporary
44、 places of work to which the public do not generally have access and where building construction, installation, repairs, alteration or demolition of property (buildings) or civil engineering (public works) or excavation or any other similar operations are carried out; transportable (semi-fixed) or m
45、obile ASSEMBLIES with enclosure. The manufacture and/or assembly may be carried out other than by the original manufacturer. This standard does not apply to individual devices and self-contained components, such as motor starters, fuse switches, electronic equipment, etc. which will comply with the
46、relevant product standards. This standard does not apply to ASSEMBLIES for use in the administrative centres of construction sites (offices, cloakrooms, ASSEMBLY rooms, canteens, restaurants, dormitories, toilets, etc.). Requirements for electrical protection provided by equipment manufactured accor
47、ding to this International Standard are given in IEC 60364-7-704. 2 Normative references This clause of Part 1 is applicable except as follows: Addition: IEC 60068-2-27:2008, Environmental testing Part 2-27: Tests Test Ea and guidance: Shock IEC 60068-2-42:2003, Environmental testing Part 2-42: Test
48、s Test Kc: Sulphur dioxide test for contacts and connections IEC 60364-7-704:2005, Low-voltage electrical installations Part 7-704: Requirements for special installations or locations Construction and demolition site installations 6 61439-4 IEC:2012 IEC 61140:2001, Protection against electric shock
49、Common aspects for installation and equipment IEC 61439-1:2011, Low-voltage switchgear and controlgear assemblies Part 1: General rules IEC 61558-2-23, Safety of transformers, reactors, power supply units and combinations thereof Part 2-23: Particular requirements and tests for transformers and power supply units for construction sites 3 Terms and definitions This clause of Part 1 is applicable except as follow
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1