IEC 61558-2-26-2013 Safety of transformers reactors power supply units and combinations thereof - Part 2-26 Particular requirements and tests for transformers and power supply unit.pdf

1、 IEC 61558-2-26 Edition 1.0 2013-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Safety of transformers, reactors, power supply units and combinations thereof Part 2-26: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes Scurit des trans

2、formateurs, bobines dinductance, blocs dalimentation et des combinaisons de ces lments Partie 2-26: Rgles particulires et essais pour les transformateurs et les blocs dalimentation entirement destins lconomie dnergie et dautres fins IEC61558-2-26:2013 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyrigh

3、t 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member Nationa

4、l Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sa

5、uf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vou

6、s avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03

7、 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technic

8、al content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by

9、 a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Ava

10、ilable on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the Interna

11、tional Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale

12、 (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que

13、vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne

14、 aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par em

15、ail. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechn

16、ique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61558-2-26 Edition 1.0 2013-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Safety of transformers, r

17、eactors, power supply units and combinations thereof Part 2-26: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes Scurit des transformateurs, bobines dinductance, blocs dalimentation et des combinaisons de ces lments Partie 2-26: Rgles

18、 particulires et essais pour les transformateurs et les blocs dalimentation entirement destins lconomie dnergie et dautres fins INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE R ICS 29.180 PRICE CODE CODE PRIX ISBN 978-2-8322-0913-4 Registered trademark of the In

19、ternational Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61558-2-26 IE

20、C:2013 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 6 3 Terms and definitions . 7 4 General requirements . 8 5 General notes on test . 8 6 Ratings . 9 7 Classification 9 8 Marking and other information 9 9 Protection against electric shock 10 10 Change of input voltage setting 11 11 Ou

21、tput voltage and output current under load . 11 12 No-load output voltage . 12 13 Short-circuit voltage . 12 14 Heating. 12 15 Short circuit and overload protection 13 16 Mechanical strength . 13 17 Protection against harmful ingress of dust, solid objects and moisture 13 18 Insulation resistance, d

22、ielectric strength and leakage current . 13 19 Construction . 13 20 Components . 15 21 Internal wiring . 15 22 Supply connection and other external flexible cables or cords 15 23 Terminals for external conductors . 15 24 Provisions for protective earthing . 15 25 Screws and connections . 15 26 Creep

23、age distances, clearances and distances through insulation 15 27 Resistance to heat, fire and tracking . 15 28 Resistance to rusting 15 Annexes . 16 Annex B (normative) Testing a series of transformers 16 Annex L (normative) Routine tests (production test) . 16 Annex AA (informative) Saving energy .

24、 17 Annex BB (informative) Incorporated transformers . 18 Bibliography 19 Table 101 Output voltage difference 12 61558-2-26 IEC:2013 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF Part 2-26: Particular requirements and test

25、s for transformers and power supply units all for saving energy and other purposes FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to pr

26、omote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guide

27、s (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC al

28、so participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as poss

29、ible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. Wh

30、ile all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake

31、 to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestat

32、ion of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of t

33、his publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or i

34、ndirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for

35、 the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International standard IEC 61558-2-26 has bee

36、n prepared by IEC technical committee 96: Transformers, reactors, power supply units and combinations thereof. The text of this standard is based on the following documents: FDIS Report on voting 96/400/FDIS 96/404/RVD Full information on the voting for the approval of this standard can be found in

37、the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 61558-2-26 IEC:2013 This part is intended to be used in conjunction with the latest edition of IEC 61558-1 and its amendments. It is based on the second edition (

38、2005) of that standard. This part supplements or modifies the corresponding clauses in IEC 61558-1, so as to convert that publication into the IEC standard: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes. A list of all parts of the

39、IEC 61558 series, under the general title: Safety of transformers, reactors, power supply units and combination thereof, can be found on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at th

40、e time of the next edition. Where a particular subclause of Part 1 is not mentioned in this part that subclause applies as far as is reasonable. Where this part states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. In this part the following pr

41、int types are used: requirements proper: in roman type; test specifications: in italic type; explanatory matter: in smaller roman type: In the text of this part, the words in bold are defined in Clause 3. Subclauses, notes, figures and tables additional to those in Part 1 are numbered starting from

42、101; supplementary annexes are entitled AA, BB, etc. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publicati

43、on will be reconfirmed, withdrawn, replaced by a revised edition, or amended. NOTE The attention of National Committees is drawn to the fact that equipment manufacturers and testing organizations may need a transitional period following publication of a new, amended or revised IEC publication in whi

44、ch to make products in accordance with the new requirements and to equip them for conducting new or revised tests. It is the recommendation of the committee that the content of this publication be adopted for implementation nationally not earlier than 12 months from the date of publication. 61558-2-

45、26 IEC:2013 5 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF Part 2-26: Particular requirements and tests for transformers and power supply units all for saving energy and other purposes 1 Scope Replacement: This part of IEC 61558 deals with the safety of transformers,

46、 power supply units and switch mode power supply units all for saving energy and other purposes in electrical installations by adjusting the output voltage and/or other electrical characteristics on the output circuits without interruption affected by the transformers, power supply unit and switch m

47、ode power supply unit. NOTE 1 Safety includes electrical, thermal and mechanicals aspects. The saving of energy is obtained by voltage stabilization and/or voltage adjusting of the electrical installation. This standard may also be used for power supply units and switch mode power supply units inten

48、ded to be used where adjusting of the voltage or other electrical characteristics is required by the final application. NOTE 2 An example of electrical installation is lighting installations, outdoor or indoor. NOTE 3 In special applications the reduction of the output voltage may affect the safety

49、and the performance of the supplied equipment. This part applies to single-phase or three-phase transformers, power supply units and switch mode power supply units all for saving energy which are air-cooled (natural or forced), independent or incorporated and containing transformers and/or power supply units from the following parts of the IEC 61558 series: Part 2-1: Particular requirements and tests for separating tr