IEC 61747-3-2015 Liquid crystal display devices - Part 3 Liquid crystal display (LCD) cells - Sectional specification《液晶显示器件.第3部分 液晶显示屏(LCD).分规范》.pdf

1、 IEC 61747-3 Edition 3.0 2015-04 INTERNATIONAL STANDARD Liquid crystal display devices Part 3: Liquid crystal display (LCD) cells Sectional specification IEC 61747-3:2015-04(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise spec

2、ified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions abo

3、ut IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.

4、ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications

5、 is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Stand

6、ards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It a

7、lso gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electroped

8、ia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.c

9、h/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webst

10、ore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61747-3 Edition 3.0 2015-04 INTERNATIONAL STANDARD Liquid crystal display devices Part 3: Liquid crystal display (LCD) cells Sectional specif

11、ication INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 31.120 ISBN 978-2-8322-2570-7 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 61747-3:2015 IEC 2015 CONTENTS FOREWORD . 3 1 Scope 5

12、2 Normative references 5 3 Terms and definitions 5 4 Quality assessment procedure . 6 4.1 Primary stage of manufacture . 6 4.2 Production process . 6 4.3 Subcontracting 7 4.4 Structural similarity procedures . 7 4.4.1 General . 7 4.4.2 Structurally similar cells . 7 4.4.3 Test-dependent criteria for

13、 structural similarity 7 4.5 Qualification approval procedure . 8 4.6 Quality conformance test 8 4.6.1 General . 8 4.6.2 Division into groups and subgroups . 8 4.6.3 Groups and categories 9 4.6.4 Group A Lot-by-lot tests 9 4.6.5 Group B Lot-by-lot tests 9 4.6.6 Group C Periodic tests 9 4.6.7 Group D

14、 Periodic tests 9 4.6.8 Dimensions to be checked . 9 4.6.9 Sampling requirements (fixed sampling sizes) . 9 4.7 Capability approval procedure . 9 4.8 Screening . 9 4.9 Delayed deliveries 10 5 Test and measurement procedures 10 Table 1 Test-dependent criteria for structural similarity 11 Table 2 Qual

15、ification approval tests . 12 Table 3 Groups and categories of assessed quality . 13 Table 4 Group A Lot-by-lot tests . 13 Table 5 Group B Lot-by-lot tests . 13 Table 6 Group C Periodic tests . 13 Table 7 Sampling requirements for group A tests . 14 Table 8 Sampling requirements for group B and C te

16、sts . 15 Table 9 Screening test item and conditions 15 IEC 61747-3:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIQUID CRYSTAL DISPLAY DEVICES Part 3: Liquid crystal display (LCD) cells Sectional specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldw

17、ide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other act

18、ivities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subjec

19、t dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions dete

20、rmined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Commi

21、ttees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which

22、 they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publicati

23、on and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not

24、responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technica

25、l committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Pub

26、lications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject o

27、f patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61747-3 has been prepared by IEC technical committee 110: Electronic display devices. This International Standard is a sectional specification for liquid crystal display cells

28、. It is be used in conjunction with IEC 61747-1-1:2014. This third edition cancels and replaces the second edition, published in 2006. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) All the ref

29、erences to IECQ and QC were removed in accordance with ISO/IEC Directives Part 2, 6.7.1 and 6.7.2; 4 IEC 61747-3:2015 IEC 2015 b) Updated normative references. The text of this standard is based on the following documents: CDV Report on voting 110/532/CDV 110/616/RVC Full information on the voting f

30、or the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 61747 series, under the general title Liquid crystal display devices, can be fou

31、nd on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee has decided that the contents of this publication will remain unchanged until the stabili

32、ty date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IEC 617

33、47-3:2015 IEC 2015 5 LIQUID CRYSTAL DISPLAY DEVICES Part 3: Liquid crystal display (LCD) cells Sectional specification 1 Scope This part of IEC 61747 applies to liquid crystal cells of the segment type monochrome. It gives details of the quality assessment procedures, inspection requirements, screen

34、ing sequences, sampling requirements and test and measurement procedures required for the assessment of liquid crystal display cells. Instead of the qualification approval procedure, the capability approval procedure can be applied for all products manufactured in a defined process. 2 Normative refe

35、rences The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

36、IEC 61747-1-1:2014, Liquid crystal display devices Part 1-1: Generic Generic specification IEC 61747-10-1, Liquid crystal display devices Part 10-1: Environmental, endurance and mechanical test methods Mechanical IEC 61747-10-2, Liquid crystal display devices Part 10-2: Environmental, endurance and

37、mechanical test methods Environmental and endurance 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 production line arrangement of process operations in production permitting sequential occurrence at various stages of production EXAMPLE Examp

38、les of processes: a) electrode patterning process; b) alignment treatment process; c) assembly process; d) liquid crystal material filling process; e) finishing process; f) inspection process. Note 1 to entry: Quality assessment procedures are not included in these phases. 6 IEC 61747-3:2015 IEC 201

39、5 3.2 production lot devices of the same type, manufactured in the same production lines and passing through the same nominated process, normally within one month 3.3 major changes any change in the manufacturing process or technology which could affect the quality or performance of a product suppli

40、ed to an approved specification, or which could require a product to be transferred from one similarity group to another group EXAMPLE Examples of major changes: a) electrode patterning: completely different pattern; b) material of substrate: thickness of glass substrate; c) type of LC material: typ

41、e of electro-optical effect, e.g. TN, STN, etc.; d) pin assignment change. Note 1 to entry: See 4.4 below. Note 2 to entry: Equipment change without changing the technology is not considered as a major change. Note 3 to entry: It is the responsibility of the designated management representative (DMR

42、) to decide whether the change is major or not. Note 4 to entry: Any major change is only to be implemented with notification and demonstration by test evidence of quality. 4 Quality assessment procedure 4.1 Primary stage of manufacture The primary stage of manufacture of liquid crystal display cell

43、s is the first process of the patterning of electrodes. 4.2 Production process The production process of liquid crystal display cells is classified as follows: a) Electrode patterning process This process is the set of manufacturing process operations from the primary stage to the last step for the

44、patterning of the electrodes. b) Alignment treatment process This process is the set of manufacturing process operations to form the alignment layer on the glass substrate for controlling the liquid crystal molecular direction. c) Assembly process This process is the set of manufacturing process ope

45、rations comprising the seal printing and the transfer plate assembling. d) Liquid crystal material filling process This process is the set of manufacturing process operations comprising the filling of liquid crystal material between the two parallel glass substrates, and the sealing. e) Finishing pr

46、ocess This process is the final set of manufacturing process operations comprising the fitting of polarizer and reflector, as well as the marking. f) Inspection process IEC 61747-3:2015 IEC 2015 7 This process is the final set of process operations before lot release, comprising visual inspection of

47、 dimensions and electrical and optical characteristics. 4.3 Subcontracting The approved manufacturer shall ensure that the following conditions are satisfied: a) The subcontracted manufacturing process may be either a part of, or a whole of, the cell and/or module manufacturing process, unconditiona

48、lly, including screening steps which are incorporated in them. Screening operations applied after the assembly process may also be independently subcontracted. b) It shall be ensured that the DMR that is certifying the components has been provided with the full quality assessment and inspection docu

49、mentation of any operation outside the specified geographical area. The documentation shall include the inspection records for each sample of the product which undergoes inspection; regularly verifies that the quality assessment and inspection is applied in accordance with the agreed requirements. c) The DMR shall be provided with, and shall agree with the procedures for the transfer of the parts from the place of manufacture within the specified geographical ar