IEC 61747-4-2012 Liquid crystal display devices - Part 4 Liquid crystal display modules and cells - Essential ratings and characteristics《液晶显示器.第4部分 液晶显示模块和屏.基本额定值和特性》.pdf

1、 IEC 61747-4 Edition 2.0 2012-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Liquid crystal display devices Part 4: Liquid crystal display modules and cells Essential ratings and characteristics Dispositifs daffichage cristaux liquides Partie 4: Modules et cellules daffichage cristaux liquides Valeu

2、rs limites et caractristiques essentielles IEC61747-4:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical,

3、 including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address b

4、elow or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie

5、 et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la C

6、EI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Internat

7、ional Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links:

8、 IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpubli

9、shed Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and

10、definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please conta

11、ct the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des public

12、ations CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouv

13、er des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just

14、 Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais

15、, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.c

16、h. IEC 61747-4 Edition 2.0 2012-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Liquid crystal display devices Part 4: Liquid crystal display modules and cells Essential ratings and characteristics Dispositifs daffichage cristaux liquides Partie 4: Modules et cellules daffichage cristaux liquides Val

17、eurs limites et caractristiques essentielles INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE K ICS 31.120 PRICE CODE CODE PRIX ISBN 978-2-83220-352-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechni

18、que Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61747-4 IEC:2012 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Liquid crystal d

19、isplay modules 5 3.1 Principles and material used 5 3.2 Modes of operation 5 3.3 Details of outline . 5 3.4 Limiting values (absolute maximum rating system) over the operating temperature range, unless otherwise stated 6 3.5 Electrical and optical characteristics 6 3.6 Supplementary information 7 4

20、Liquid crystal display cells (LCD cells) 8 4.1 Principle and material used . 8 4.2 Modes of operation 8 4.3 Details of outline . 8 4.4 Limiting values (absolute maximum rating system) over the operating temperature range, unless otherwise stated 8 4.5 Electrical and optical characteristics 9 4.6 Sup

21、plementary information 9 Table 1 Electrical and optical characteristics of LCD modules 6 Table 2 Electrical and optical characteristics of LCD cells 9 61747-4 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIQUID CRYSTAL DISPLAY DEVICES Part 4: Liquid crystal display modules and cells Essent

22、ial ratings and characteristics FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions c

23、oncerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”).

24、Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborate

25、s closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the

26、relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that

27、the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the max

28、imum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies

29、 provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IE

30、C or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and ex

31、penses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) At

32、tention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61747-4 has been prepared by IEC technical committee 110: Electronic

33、display devices. This second edition cancels and replaces the first edition published in 1998. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: 2.1 and 3.1 of IEC 61747-4:1998 were deleted because t

34、hese items are defined in IEC 61747-1; 2.7.6, in 2.7, Supplementary information, of IEC 61747-4:1998 was deleted because the scope of this standard is about passive matrix monochrome liquid crystal display modules; The item “Gray scale: digital or analog” in 2.3.1 of IEC 61747-4:1998 was changed to

35、“Gray scale: number” because it is more accurate; 4 61747-4 IEC:2012 Contrast mode: light symbol on dark background (“LOD” or “positive image”) or dark symbol on light background (“DOL” or “negative image”) was introduced in this part of IEC 61747 to replace the description in 2.3.1 and 3.3.1 of IEC

36、 61747-4:1998. The text of this standard is based on the following documents: CDV Report on voting 110/349/CDV 110/393/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordan

37、ce with the ISO/IEC Directives, Part 2. This International Standard is to be used in conjunction with IEC 61747-1:1998 and its Amendment 1 (2003). A list of all the parts in the IEC 61747 series, published under the general title Liquid crystal display devices, can be found on the IEC website. Futur

38、e standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC

39、 web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61747-4 IEC:2012 5 LIQUID CRYSTAL DISPLAY DEVICES Part 4: Liquid crystal display modules and cells Essenti

40、al ratings and characteristics 1 Scope This part of IEC 61747 describes the essential ratings and characteristics of LCD cells and passive matrix monochrome liquid crystal display modules. It does not apply to active matrix LCD cells nor to multicolour cells. 2 Normative references The following doc

41、uments, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61747-1:1998, Liquid

42、 crystal and solid-state display devices Part 1: Generic specification 3 Liquid crystal display modules 3.1 Principles and material used Example: a TN display cell with electronic circuits and connector pins. Where appropriate, a type of light source. 3.2 Modes of operation 3.2.1 Optical mode of ope

43、ration illumination mode: for example reflective, transmissive, transflective gray scale: number contrast mode: light symbol on dark background (“LOD” or “positive image”) or dark symbol on light background (“DOL” or “negative image”) 3.2.2 Electrical mode of operation example: static mode or multip

44、lex mode, etc. 3.3 Details of outline 3.3.1 Material, mechanical description examples: glass, plastic, metal, etc. construction: for example integrated backlight, bezel structure 3.3.2 Method of connection connector, flex cable or connection pins, etc. 6 61747-4 IEC:2012 3.3.3 Outline drawing and di

45、mensions overall dimensions viewing area and display centre 3.3.4 Pinout table and/or connection diagram type of connectors 3.3.5 Preferred or designed viewing direction 3.4 Limiting values (absolute maximum rating system) over the operating temperature range, unless otherwise stated 3.4.1 Minimum a

46、nd maximum operating temperature (Top) 3.4.2 Minimum and maximum storage temperature (Tstg) 3.4.3 Minimum and maximum value of supply voltages for logic and LCD drive (VDD-VSS，VDD-VEE，VEE-VSS，VO-VSS，VDD-VO) 3.4.4 Minimum and maximum value of input signal voltage (VIN) 3.4.5 Where appropriate, maximu

47、m value of backlight voltage (VBL) 3.4.6 Where appropriate, maximum soldering temperature (Tsld) maximum soldering time and minimum distance to module package should be specified 3.5 Electrical and optical characteristics The following parameters should be specified in Table 1. Table 1 Electrical an

48、d optical characteristics of LCD modules Reference Characteristics Condition at Top= 25 C unless otherwise specified Symbol Requirements 3.5.1 Supply voltage for logic drive Supply voltage for LCD drive VDD-VSSMin. Max. VDD-VEEVEE-VSSVO-VSSVDD-VO3.5.2 Input signal voltages High level input signal vo

49、ltage Low level input signal voltage VINVIHVILMin. Max. 3.5.3 Backlight voltages (where appropriate) VBLMin. Max. 3.5.4 Operating frequency (where appropriate) Frame frequency Oscillator frequency fopfFRMfOSCMin. Max. 3.5.5 Supply currents (without backlight) Conditions chosen to achieve maximum supply current, e.g. operating supply voltage, display pattern, etc., as appropriate ItotIDDand/or IE