1、 IEC 61754-26 Edition 1.0 2012-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 26: Type SF connector family Dispositifs dinterconnexion et composants passifs fibres optiques Interfaces de connecteurs pour
2、 fibres optiques Partie 26: Famille de connecteurs de type SF IEC61754-26:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elect
3、ronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please c
4、ontact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y c
5、ompris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Co
6、mit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares an
7、d publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been publ
8、ished. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webst
9、ore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more th
10、an 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assi
11、stance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes.
12、 A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance
13、vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publicat
14、ions de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en a
15、nglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions cont
16、actez-nous: csciec.ch. IEC 61754-26 Edition 1.0 2012-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 26: Type SF connector family Dispositifs dinterconnexion et composants passifs fibres optiques Interfac
17、es de connecteurs pour fibres optiques Partie 26: Famille de connecteurs de type SF INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-83220-215-9 Registered trademark of the International Electrotechnical Commission M
18、arque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 61754-26 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION .
19、 5 1 Scope . 6 2 Description . 6 3 Interfaces . 6 Figure 1 SF plug connector interface 7 Figure 2 Expanded view of b (plug endface geometry) 8 Figure 3 Positions of fibres . 9 Figure 4 SF socket connector interface . 10 Figure 5 Expanded view of e (micro holes array geometry) . 11 Figure 6 Positions
20、 of micro holes 12 Figure 7 SF adaptor interface . 13 Figure 8 SF adaptor clip interface . 14 Table 1 Dimensions of the SF plug connector interface . 7 Table 2 Dimensions of the SF plug endface 8 Table 3 Positions of fibres for SF plug 9 Table 4 Dimensions of the SF socket connector interface . 10 T
21、able 5 Dimensions of the micro holes array 11 Table 6 Positions of micro holes for SF socket 12 Table 7 Dimensions of the SF adaptor interface 13 Table 8 Dimensions of the SF adaptor clip interface . 14 61754-26 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVIC
22、ES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 26: Type SF connector family FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IE
23、C is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS)
24、 and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with
25、the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as near
26、ly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that
27、 sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees
28、 undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide an
29、y attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest ed
30、ition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether d
31、irect or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispe
32、nsable for the correct application of this publication. International Standard IEC 61754-26 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components of IEC technical committee 86: Fibre optics, The text of this standard is based on the following documents: FD
33、IS Report on voting 86B/3433/FDIS 86B/3468/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2, A list of all parts of the IEC 61754
34、 series, under the general title Fibre optic connector interfaces, can be found on the IEC website. 4 61754-26 IEC:2012 Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The co
35、mmittee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised ed
36、ition, or amended. 61754-26 IEC:2012 5 INTRODUCTION The International Organization for International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concerning IEC 61754-26. IEC takes no position conc
37、erning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the hold
38、er of this patent right is registered with IEC. Information may be obtained from: Nippon Telegraph and Telephone Corporation, 9-11, Midori-cho, 3-Chome Musashino-Shi, Tokyo 180-8585, Japan. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent
39、rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights. 6 61754-26 IEC:2012 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 26: Type SF connector family 1 Scope This part of IEC 61754
40、defines the standard interface dimensions for the type SF optical board connector that uses a normal glass fibre and the physical contact technique to connect flexible optical boards and ribbon fibres. 2 Description The parent connector for the type SF connector family is a multiway connector with a
41、 plug/socket connector set configuration, The plug is characterized by multiway cantilevered optical fibres located inside the plug, The plug optical fibres buckled to mate with the socket optical fibre ends, Mating socket optical fibres are positioned and aligned by using multiway micro holes, Sock
42、et micro holes capture, guide, and align the plug optical fibres during connector set engagement, The plug fibres and socket fibres are butted together to realize physical contact connection by employing the buckled force of the plug fibres without using a ferrule or a spring, 3 Interfaces This stan
43、dard contains the following standard interfaces, IEC 61754-26-1: SF plug connector flat interface for 2 to 16 fibres IEC 61754-26-2: SF socket connector flat interface for 2 to 16 fibres The following connectors are intermateable: IEC 61754-26-1 mates with IEC 61754-26-2 Figure 1 is an example of a
44、SF plug connector interface. Table 1 gives dimensions of the SF plug connector interface. 61754-26 IEC:2012 7 Marking (both sides) IEC 1356/12 Figure 1 SF plug connector interface Table 1 Dimensions of the SF plug connector interface Item Dimensions mm Remarks Minimum Maximum PA 7,6 PB 8,6 8,7 PC1 0
45、,995 1,02 PC2 0,795 0,82 PD 2,6 PE 8,5 8,7 PF 6,75 6,8 PG 5,8 5,85 PH 5,6 PJ 2 2,05 PK 9,4 9,6 PL 0,04 0,06 See Figure 2 PM 0,4 0,5 PN 1 1,1 PP 0,4 PQ 0,2 PR 0,4 PS 6,8 NOTE Put markings on upper and lower faces of PC1 side. Those shapes and sizes are optional. 8 61754-26 IEC:2012 Figure 2 is an exp
46、anded view of b for SF plug endface. Table 2 gives dimensions of the SF plug endface. Detail c Detail b IEC 1357/12 Figure 2 Expanded view of b (plug endface geometry) Table 2 Dimensions of the SF plug endface Item Dimensions Notes Minimum Maximum FA ( 0,125 mm) NOTE FB 0,08 mm a FC 25 65 Chamfer an
47、gle FD 0,75 mm 0,9 mm Coating removal length NOTE The SF plug is possible to use for A1a multi-mode fibre (IEC 60793-2-10) and B single-mode fibre (IEC 60793-2-50). aThe minimum diameter of FB shall be larger than the core of the optical fibre. 61754-26 IEC:2012 9 Figure 3 is an example of the posit
48、ions of fibres. Table 3 gives dimensions of the positions of fibres for SF plug. The symmetry of cables relative to the X axis shall be within 0,02 mm. IEC 1358/12 NOTE 1 The datum X is the X axis of the dimension PJ at the centre. NOTE 2 The datum Y is the Y axis of the dimension PF at the centre.
49、Figure 3 Positions of fibres Table 3 Positions of fibres for SF plug Item Dimensions mm Notes Minimum Maximum CA 0,115 0,135 1 CB 0,365 0,385 1 CC 0,615 0,635 1 CD 0,865 0,885 1 CE 1,115 1,135 1 CF 1,365 1,385 1 CG 1,615 1,635 1 CH 1,865 1,885 1 NOTE 1 Each dimension is specified at the end of a fibre. 10 61754-26 IEC:2012 Figure 4 is an example of a S
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1