IEC 61754-3-1996 Fibre optic connector interfaces - Part 3 Type LSA connector family《纤维光学连接器接口 第3部分 LSA型连接器门类》.pdf

1、 IEC 61754-3 Edition 1.0 1996-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic connector interfaces Part 3: Type LSA connector family Interfaces de connecteurs pour fibres optiques Partie 3: Famille de connecteurs de type LSA IEC 61754-3:1996-12(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECT

2、ED Copyright 1996 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs mem

3、ber National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction

4、 rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur.

5、 Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919

6、 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The tech

7、nical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical infor

8、mation on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number,

9、text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by ema

10、il. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV)

11、 online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IE

12、C Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui la

13、bore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou a

14、mendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Androi

15、d et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Pub

16、lished - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et

17、lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques l

18、ectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des comment

19、aires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61754-3 Edition 1.0 1996-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic connector interfaces Part 3: Type LSA connector family Interfaces de connecteurs pour fibres optiques Partie 3: Famille de conn

20、ecteurs de type LSA INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE J ICS. 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1471-8 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Wa

21、rning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61754-3:1996 IEC 1996 CONTENTS Page FOREWORD . 3 Clause 1 Scope . 4 2 Description 4 3 Interfaces 4 IEC 61754-3:19

22、96 IEC 1996 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC CONNECTOR INTERFACES Part 3: Type LSA connector family FOREWORD 1) The IEC (International Electrotechnical Commission) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Nation

23、al Committees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, the IEC publishes International Standards. Their preparation is entrusted to technical

24、committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. The IEC collaborates closely with the International Organiz

25、ation for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of the IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technic

26、al committee has representation from all interested National Committees. 3) The documents produced have the form of recommendations for international use and are published in the form of standards, technical reports or guides and they are accepted by the National Committees in that sense. 4) In orde

27、r to promote international unification, IEC National Committees undertake to apply IEC International Standards transparently to the maximum extent possible in their national and regional standards. Any divergence between the IEC Standard and the corresponding national or regional standard shall be c

28、learly indicated in the latter. 5) The IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with one of its standards. 6) Attention is drawn to the possibility that some of the elements of this International Stan

29、dard may be the subject of patent rights. The IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61754-3 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre op

30、tics. This bilingual version (2014-03) corresponds to the monolingual English version, published in 1996-12. The text of this standard is based on the following documents: FDIS Report on voting 86B/834/FDIS 86B/924/RVD Full information on the voting for the approval of this standard can be found in

31、the report on voting indicated in the above table. The French version of this standard has not been voted upon. 4 IEC 61754-3:1996 IEC 1996 FIBRE OPTIC CONNECTOR INTERFACES Part 3: Type LSA connector family 1 Scope This part of IEC 61754 defines the standard interface dimensions for type LSA family

32、of connectors. 2 Description The parent connector for type LSA connector family is a single position plug connector which is characterized by a 2,5 mm nominal ferrule diameter. It includes a screw coupling nut and a ferrule spring load in the direction of the optical axis. The plug has a single male

33、 key which may be used to orient and limit the relative rotation between the connector and the component to which it is mated. 3 Interfaces This standard contains the following standard interfaces: Interface 3-1: Plug connector interface Screw coupling Interface 3-2: Adaptor connector interface Scre

34、w coupling Interface 3-1 mates with interface 3-2. IEC 61754-3:1996 IEC 1996 5 Figure 1 Dimensions of the plug connector interface 6 IEC 61754-3:1996 IEC 1996 Table 1a Dimensions of the plug connector interface Reference Dimensions mm Notes Minimum Maximum Basic A See tolerance grade table B 2,5 C 1

35、1,8 12,4 2 D 2,4850 2,4995 G 4 5,8 H 2,4 2,5 K 0,80 0,88 L 2,4850 3,6 M 0,5 N M5,5 x 0,5-6H Metric thread, freely rotating R 4,2 4,7 S 7,3 T 5 Length of A U 2,3 2,45 Table 1b Tolerance grades Grade Reference Dimensions mm Notes Minimum Maximum 0 A 2,4990 2,4995 1 1 A 2,4985 2,4995 1 2 A 2,4980 2,499

36、5 1 3 A 2,4970 2,4995 1 NOTES 1 Envelope condition in accordance with ISO 8015. 2 Ferrule force must be less than 20 N when the ferrule is compressed. IEC 61754-3:1996 IEC 1996 7 Figure 2 Adaptor connector interface Table 2 Dimensions of the adaptor connector interface Reference Dimensions mm Notes

37、Minimum Maximum Basic A 1 B 2,6 C 12,15 12,20 D 2,55 G 6 2 H 2,6 K 0,90 0,95 One slot on circumference L 3,7 3,8 M 3,5 3,6 N M5,5 x 0,5-6G Metric thread R 4,9 NOTES 1 The feature must accept a gauge pin as shown in figure 3 to a depth of 12,2 mm with a withdrawal force of 3 N and 10 N maximum. 2 Thr

38、ead may be continuous. 8 IEC 61754-3:1996 IEC 1996 Figure 3 Ferrule endface geometry after termination Table 3 Dimensions of the ferrule endface Reference Dimensions mm Notes Minimum Maximum BF 5 30 See note BA 0,4 1 NOTE Eccentricity of a spherical polished ferrule endface is less than 50 m. IEC 61

39、754-3:1996 IEC 1996 9 Figure 4 Gauge pin for resilient alignment sleeve Table 4 Dimensions of the pin gauge for resilient alignment sleeve Dimensions Reference Minimum Maximum Notes A 2,4993 mm 2,4995 mm 1, 2 B 12,5 mm 13,5 mm C 1,0 mm 1,5 mm D 28 32 NOTES 1 Envelope condition in accordance with ISO

40、 8015. 2 Surface roughness R Z = 0,2 m. _ 10 IEC 61754-3:1996 IEC 1996 SOMMAIRE Pages AVANT-PROPOS 11 Articles 1 Domaine dapplication 12 2 Description 12 3 Interfaces 12 IEC 61754-3:1996 IEC 1996 11 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ INTERFACES DE CONNECTEURS POUR FIBRES OPTIQUES Partie 3:

41、Famille de connecteurs de type LSA AVANT-PROPOS 1) La CEI (Commission lectrotechnique Internationale) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale

42、pour toutes les questions de normalisation dans les domaines de llectricit et de llectronique. A cet effet, la CEI, entre autres activits, publie des Normes internationales. Leur laboration est confie des comits dtudes, aux travaux desquels tout Comit national intress par le sujet trait peut partici

43、per. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent galement aux travaux. La CEI collabore troitement avec lOrganisation Internationale de Normalisation (ISO), selon des conditions fixes par accord entre les deux organisations. 2) Les

44、 dcisions ou accords officiels de la CEI concernant les questions techniques reprsentent, dans la mesure du possible, un accord international sur les sujets tudis, tant donn que les Comits nationaux intresss sont reprsents dans chaque comit dtudes. 3) Les documents produits se prsentent sous la form

45、e de recommandations internationales. Ils sont publis comme normes, rapports techniques ou guides et agrs comme tels par les Comits nationaux. 4) Dans le but dencourager lunification internationale, les Comits nationaux de la CEI sengagent appliquer de faon transparente, dans toute la mesure possibl

46、e, les Normes internationales de la CEI dans leurs normes nationales et rgionales. Toute divergence entre la norme de la CEI et la norme nationale ou rgionale correspondante doit tre indique en termes clairs dans cette dernire. 5) La CEI na fix aucune procdure concernant le marquage comme indication

47、 dapprobation et sa responsabilit nest pas engage quand un matriel est dclar conforme lune de ses normes. 6) Lattention est attire sur le fait que certains des lments de la prsente Norme internationale peuvent faire lobjet de droits de proprit intellectuelle ou de droits analogues. La CEI ne saurait

48、 tre tenue pour responsable de ne pas avoir identifi de tels droits de proprit et de ne pas avoir signal leur existence. La Norme internationale CEI 61754-3 a t tablie par le sous-comit 86B: Dispositifs dinterconnexion et composants passifs fibres optiques, du comit dtudes 86 de la CEI: Fibres optiques. La prsente version bilingue (2014-03) correspond la version anglaise monolingue publie en 1996-12. Le texte anglais de cette norme est issu des documents 86B/834/FDIS et 86B/924/RVD. Le rapport de vote 86B/924/R