IEC 61755-3-10-2016 Fibre optic interconnecting devices and passive components - Connector optical interfaces - Part 3-10 Connector parameters of non-dispersion shifted single mode.pdf

1、 IEC 61755-3-10 Edition 1.0 2016-12 INTERNATIONAL STANDARD Fibre optic interconnecting devices and passive components Connector optical interfaces Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres Non-angled, ferrule-less, bore alignment connectors IE

2、C 61755-3-10:2016-12(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microf

3、ilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member Nati

4、onal Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishe

5、s International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC

6、 Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.

7、iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC

8、 publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equiva

9、lent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002.

10、 Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 61755-3-10 Edi

11、tion 1.0 2016-12 INTERNATIONAL STANDARD Fibre optic interconnecting devices and passive components Connector optical interfaces Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres Non-angled, ferrule-less, bore alignment connectors INTERNATIONAL ELECTRO

12、TECHNICAL COMMISSION ICS 33.180.20 ISBN 978-2-8322-3687-1 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 61755-3-10:2016 IEC 2016 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references

13、5 3 Terms and definitions 5 4 Description 5 5 Interface parameters . 6 Bibliography 9 Figure 1 Fibre end face dimensions . 7 Figure 2 Alignment bore dimensions 8 Table 1 Optical interface parameter values for a 125 m diameter optical fibre and an alignment bore . 8 IEC 61755-3-10:2016 IEC 2016 3 INT

14、ERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS CONNECTOR OPTICAL INTERFACES Part 3-10: Connector parameters of non-dispersion shifted single mode physically contacting fibres Non-angled, ferrule-less, bore alignment connectors FOREWORD 1) The Inte

15、rnational Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and elec

16、tronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committe

17、es; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for S

18、tandardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee ha

19、s representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accura

20、te, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional

21、 publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in som

22、e areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents i

23、ncluding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or r

24、eliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of th

25、e elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61755-3-10 has been prepared by sub-committee 86B: Fibre optic interconnecting devices and passive components, of IEC te

26、chnical committee 86: Fibre optics. The text of this standard is based on the following documents: CDV Report on voting 86B/3990A/CDV 86B/4032/RVC Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This do

27、cument has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 61755-3-10:2016 IEC 2016 A list of all parts in the IEC 61755 series, published under the general title Fibre optic interconnecting devices and passive components Connector optical interfaces, can be found on the IEC we

28、bsite. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised

29、 edition, or amended. A bilingual version of this publication may be issued at a later date. IEC 61755-3-10:2016 IEC 2016 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS CONNECTOR OPTICAL INTERFACES Part 3-10: Connector parameters of non-dispersion shifted single mode physically contact

30、ing fibres Non-angled, ferrule-less, bore alignment connectors 1 Scope This part of IEC 61755 defines certain dimensional limits of a 125 m diameter single mode silica fibre optical interface and an alignment bore to meet specific requirements for non- angled fibre-to-fibre interconnection as define

31、d in IEC 61755-2-1. The silica fibre materials specified in this document are suitable for use in categories C, U, E and O as defined in IEC 61753-1. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of

32、 this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61753-1, Fibre optic interconnecting devices and passive components Part 1: General and guidance for performance standar

33、d IEC 61755-2-1:2006, Fibre optic connector optical interfaces Part 2-1: Optical interface standard single mode non-angled physically contacting fibres 3 Terms and definitions No terms and definitions are listed in this document. ISO and IEC maintain terminological databases for use in standardizati

34、on at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 4 Description The performance of a ferrule-less optical interface is determined by the accuracy with which the optical datum targets of two matin

35、g fibres are aligned with each other. There are three conditions affecting the alignment of two optical datum targets: lateral offset, angular offset and longitudinal offset. Parameters influencing the lateral and angular offset of the optical fibre axes of this interface include the following: fibr

36、e cladding diameter; alignment bore diameter; 6 IEC 61755-3-10:2016 IEC 2016 length of the bore; fibre core location relative to the fibre cladding diameter centerline. Parameters influencing the optical fibre end face deformation requirements to maintain the physical contact of two mated connectors

37、 to which this interface applies: end face spherical radius; end face angle; fibre tip diameter; axial force on fibre end face; fibre material physical constants. 5 Interface parameters The end face dimensions of prepared fibres are shown in Figure 1. Alignment bore dimensions are shown in Figure 2.

38、 Optical interface parameter values for a 125 m diameter optical fibre and an alignment bore are shown in Table 1. IEC 61755-3-10:2016 IEC 2016 7 Figure 1 Fibre end face dimensions IEC A B C D E F 8 IEC 61755-3-10:2016 IEC 2016 Figure 2 Alignment bore dimensions Table 1 Optical interface parameter v

39、alues for a 125 m diameter optical fibre and an alignment bore Parameter values Ref. Grade B Grade C Grade D Units Remarks Minimum Maximum Minimum Maximum Minimum Maximum A 4 10 mm End face radius B 0 0,7 degrees End face angle C 25 65 degrees Chamfer angle D 0,03 0,08 mm Tip diameter E 0 0,000 6 mm

40、 Core concentricity error F 0,124 0 a0,126 0amm Cladding diameter G 0,126 0 0,127 0 mm Bore diameter H 0,55 - mm Bore length NOTE 1 The core concentricity error and cladding diameter values specified in this document have been calculated to ensure that the attenuation values specified in IEC 61755-2

41、-1:2006 are met at the wavelength, mode field diameter and nominal index of refraction given in IEC 61755-2-1:2006, Table 3, at the single channel level. NOTE 2 Refer to Figure 1 and Figure 2 for dimensional references. aIEC 60793-2-50:2015 defines a minimum cladding diameter of 0,124 mm and a maxim

42、um cladding diameter of 0,126 mm for categories of B1.1, B1.3, B6_a1 and B6_a2 fibre. Contact force shall be 0,6 N minimum. The optical fibre material shall be fused silica, and the nominal material physical constant values shall be Youngs modulus, (72,7 7) GPa, Poissons ratio, 0,165 0,015. IEC G H

43、Optical datum target IEC 61755-3-10:2016 IEC 2016 9 Bibliography IEC 60793-2-50:2015, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres IEC 61754 (all parts), Fibre optic interconnecting devices and passive components Fibre optic connector interf

44、aces IEC 61755-1, Fibre optic connector optical interfaces Part 1: Optical interfaces for single mode non-dispersion shifted fibres General and guidance ABE, Y., KOBAYASHI, M., ASAKAWA, S., and NAGASE, R. Analysis of Fiber Endface Shape and Processing Conditions for a Fiber Physical Contact Connector, IEICE Trans. Electron., vol. E86-C, no. 3, p.490-495, March 2003. _ INTERNATIONAL ELECTROTECHNICAL COMMISSION 3, rue de Varemb PO Box 131 CH-1211 Geneva 20 Switzerland Tel: + 41 22 919 02 11 Fax: + 41 22 919 03 00 infoiec.ch www.iec.ch