1、 IEC 61784-5-19 Edition 1.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial communication networks Profiles Part 5-19: Installation of fieldbuses Installation profiles for CPF 19 Rseaux de communication industriels Profils Partie 5-19: Installation des bus de terrain Profils dinstalla
2、tion pour CPF 19 IEC61784-5-19:2013 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including
3、photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or you
4、r local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les mic
5、rofilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre
6、 pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Stand
7、ards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC public
8、ations search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay u
9、p to date on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions
10、 in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Cust
11、omer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI
12、Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publ
13、ications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published
14、dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que
15、 les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 6178
16、4-5-19 Edition 1.0 2013-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial communication networks Profiles Part 5-19: Installation of fieldbuses Installation profiles for CPF 19 Rseaux de communication industriels Profils Partie 5-19: Installation des bus de terrain Profils dinstallation pour
17、 CPF 19 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE X ICS 25.040.40; 35.100.40 PRICE CODE CODE PRIX ISBN 978-2-8322-1073-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warn
18、ing! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinside 2 61784-5-19 IEC:2013 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope . 8 2 Normative references . 8 3 Terms,
19、 definitions and abbreviated terms . 8 4 CPF19: Overview of installation profiles . 8 5 Installation profile conventions . 8 6 Conformance to installation profiles 9 Annex A (normative) CP 19/1 (MECHATROLINK-II) specific installation profile . 11 A.1 Installation profile scope . 11 A.2 Normative ref
20、erences . 11 A.3 Installation profile terms, definitions, and abbreviated terms . 11 A.3.1 Terms and definitions 11 A.3.2 Abbreviated terms . 11 A.3.3 Conventions for installation profiles . 11 A.4 Installation planning . 12 A.4.1 General . 12 A.4.2 Planning requirements . 12 A.4.3 Network capabilit
21、ies 12 A.4.4 Selection and use of cabling components 14 A.4.5 Cabling planning documentation 21 A.4.6 Verification of cabling planning specification . 21 A.5 Installation implementation . 22 A.5.1 General requirements 22 A.5.2 Cable installation . 22 A.5.3 Connector installation 23 A.5.4 Terminator
22、installation . 24 A.5.5 Device installation . 24 A.5.6 Coding and labelling 24 A.5.7 Earthing and bonding of equipment and devices and shield cabling . 24 A.5.8 As-implemented cabling documentation . 25 A.6 Installation verification and installation acceptance test 25 A.6.1 General . 25 A.6.2 Instal
23、lation verification . 25 A.6.3 Installation acceptance test . 26 A.7 Installation administration . 26 A.8 Installation maintenance and installation troubleshooting . 27 Annex B (normative) CP 19/2 (MECHATROLINK-III) specific installation profile . 29 B.1 Installation profile scope . 29 B.2 Normative
24、 references . 29 B.3 Installation profile terms, definitions, and abbreviated terms . 29 B.3.1 Terms and definitions 29 B.3.2 Abbreviated terms . 29 B.3.3 Conventions for installation profiles . 29 61784-5-19 IEC:2013 3 B.4 Installation planning . 29 B.4.1 General . 29 B.4.2 Planning requirements .
25、29 B.4.3 Network capabilities 30 B.4.4 Selection and use of cabling components 31 B.4.5 Cabling planning documentation 36 B.4.6 Verification of cabling planning specification . 36 B.5 Installation implementation . 37 B.5.1 General requirements 37 B.5.2 Cable installation . 37 B.5.3 Connector install
26、ation 38 B.5.4 Terminator installation . 38 B.5.5 Device installation . 38 B.5.6 Coding and labelling 39 B.5.7 Earthing and bonding of equipment and devices and shield cabling . 39 B.5.8 As-implemented cabling documentation . 39 B.6 Installation verification and installation acceptance test 39 B.6.1
27、 General . 39 B.6.2 Installation verification . 39 B.6.3 Installation acceptance test . 40 B.7 Installation administration . 40 B.8 Installation maintenance and installation troubleshooting . 40 Bibliography 41 Figure 1 Standards relationships 7 Figure A.1 Topology of CP 19/1 network 13 Figure A.2 N
28、etwork expansion using repeater 13 Figure A.3 Structure of cable . 15 Figure A.4 Dimensions of single port device connector 17 Figure A.5 Dimensions of dual ports device connector . 17 Figure A.6 Dimensions of cable connector . 18 Figure A.7 Cable connector with inductors . 18 Figure A.8 Terminator
29、connection in cable connector housing 19 Figure A.9 Wiring example . 23 Figure A.10 Terminator installed in M-II cable connector 24 Figure A.11 Division of network segment by changing terminator location 28 Figure B.1 Dimensions of IMI device connector 33 Figure B.2 Dimensions of IMI cable connector
30、 . 34 Table A.1 Basic network characteristics for balanced cabling not based on Ethernet . 13 Table A.2 Number of devices and maximum segment length 14 Table A.3 Information relevant to copper cable: fixed cables 15 Table A.4 Additional cable specifications . 15 Table A.5 Connectors for copper cabli
31、ng CPs not based on Ethernet . 16 Table A.6 Parameters for balanced cables . 22 Table A.7 Pin assignment and wire colour coding for CP 19/1 connector . 24 4 61784-5-19 IEC:2013 Table A.8 Typical problems in a network with balanced cabling . 27 Table B.1 Network characteristics for balanced cabling b
32、ased on Ethernet 31 Table B.2 Information relevant to copper cable: fixed cables 31 Table B.3 Information relevant to copper cable: cords 32 Table B.4 Connectors for balanced cabling CPs based on Ethernet . 33 Table B.5 Parameters for balanced cables . 37 Table B.6 Pin assignment and wire colour cod
33、ing for CP 19/2 connector . 38 61784-5-19 IEC:2013 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL COMMUNICATION NETWORKS PROFILES Part 5-19: Installation of fieldbuses Installation profiles for CPF 19 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organizati
34、on for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC p
35、ublishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with m
36、ay participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agree
37、ment between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC P
38、ublications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used
39、or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corr
40、esponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for
41、 any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees an
42、d IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) A
43、ttention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights
44、. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61784-5-19 has been prepared by subcommittee 65C: Industrial networks, of IEC technical committee 65: Industrial-process measurement, control and automation. This standard is to be used in c
45、onjunction with IEC 61918:2013. The text of this standard is based on the following documents: FDIS Report on voting 65C/738/FDIS 65C/743/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 6 61784-5-19 IEC:2013 This
46、 publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC 61784-5 series, under the general title Industrial communication networks Profiles Installation of fieldbuses, can be found on the IEC website. The committee has decided that the contents of t
47、his publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour in
48、side logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 61784-5-19 IEC:2013 7 INTRODUCTION This International Standard is one
49、 of a series produced to facilitate the use of communication networks in industrial control systems. IEC 61918:2013 provides the common requirements for the installation of communication networks in industrial control systems. This installation profile standard provides the installation profiles of the communication profiles (CP) of a specific communication profile fami
copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1