IEC 61800-5-2-2016 Adjustable speed electrical power drive systems - Part 5-2 Safety requirements - Functional《可调速的电动设备.第5-2部分 安全要求.功能》.pdf

1、 IEC 61800-5-2 Edition 2.0 2016-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Adjustable speed electrical power drive systems Part 5-2: Safety requirements Functional Entranements lectriques de puissance vitesse variable Partie 5-2: Exigences de scurit Fonctionnelle IEC 61800-5-2:2016-04(en-fr) col

2、our inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without p

3、ermission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee

4、 for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou

5、 du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +

6、41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and relat

7、ed technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application

8、 for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publicati

9、ons by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications release

10、d. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the Internati

11、onal Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC

12、 TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire

13、organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus

14、 rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour

15、PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications rempla

16、ces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en lign

17、e de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres termi

18、nologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner

19、 des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61800-5-2 Edition 2.0 2016-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Adjustable speed electrical power drive systems Part 5-2: Safety requirements Functional Entranements lectriques de puissance

20、 vitesse variable Partie 5-2: Exigences de scurit Fonctionnelle INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 13.110; 29.200 ISBN 978-2-8322-3302-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrote

21、chnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 61800-5-2:2016 IEC 2016 CONTENTS FOREWORD . 6 INTRODUCTION . 8 1 Scope 9 2

22、 Normative references. 10 3 Terms and definitions 12 4 Designated safety sub-functions 18 4.1 General . 18 4.2 Safety sub-functions 19 4.2.1 General . 19 4.2.2 Limit values . 20 4.2.3 Stopping functions . 20 4.2.4 Monitoring functions . 21 4.2.5 Output functions Safe brake control (SBC) . 23 5 Manag

23、ement of functional safety 23 5.1 Objective 23 5.2 Requirements for the management of functional safety 23 5.3 PDS(SR) development lifecycle . 23 5.4 Planning of PDS(SR) functional safety management 24 5.5 Safety requirements specification (SRS) for a PDS(SR) . 26 5.5.1 General . 26 5.5.2 Safety sub

24、-functions requirements specification 26 5.5.3 Safety integrity requirements specification 27 5.6 PDS(SR) safety system architecture specification 28 5.6.1 General . 28 5.6.2 Requirements for safety system architecture specification . 28 6 Requirements for design and development of a PDS(SR) . 29 6.

25、1 General requirements 29 6.1.1 Change in operational status 29 6.1.2 Design standards . 29 6.1.3 Realisation . 29 6.1.4 Safety integrity and fault detection 29 6.1.5 Safety and non-safety sub-functions . 30 6.1.6 SIL for multiple safety sub-functions within one PDS(SR) 30 6.1.7 Integrated circuits

26、with on-chip redundancy 31 6.1.8 Software requirements . 31 6.1.9 Design documentation 31 6.2 PDS(SR) design requirements . 31 6.2.1 Basic and well-tried safety principles 31 6.2.2 Requirements for the estimation of the probability of dangerous random hardware failures per hour (PFH) 31 6.2.3 Archit

27、ectural constraints . 34 6.2.4 Estimation of safe failure fraction (SFF) 35 6.2.5 Requirements for systematic safety integrity of a PDS(SR) and PDS(SR) subsystems . 36 6.2.6 Design requirements for electromagnetic (EM) immunity of a PDS(SR) 39 6.2.7 Design requirements for thermal immunity of a PDS(

28、SR) . 39 IEC 61800-5-2:2016 IEC 2016 3 6.2.8 Design requirements for mechanical immunity of a PDS(SR) . 39 6.3 Behaviour on detection of fault 39 6.3.1 Fault detection . 39 6.3.2 Fault tolerance greater than zero 39 6.3.3 Fault tolerance zero . 39 6.4 Additional requirements for data communications

29、. 39 6.5 PDS(SR) integration and testing requirements . 40 6.5.1 Hardware integration 40 6.5.2 Software integration . 40 6.5.3 Modifications during integration 40 6.5.4 Applicable integration tests 40 6.5.5 Test documentation 40 7 Information for use 41 7.1 General . 41 7.2 Information and instructi

30、ons for safe application of a PDS(SR) . 41 8 Verification and validation 42 8.1 General . 42 8.2 Verification 43 8.3 Validation 43 8.4 Documentation 43 9 Test requirements 43 9.1 Planning of tests . 43 9.2 Functional testing 43 9.3 Electromagnetic (EM) immunity testing 44 9.3.1 General . 44 9.3.2 In

31、tended EM environment . 44 9.3.3 Performance criterion (fail safe state FS) . 44 9.4 Thermal immunity testing 44 9.4.1 General . 44 9.4.2 Functional thermal test . 45 9.4.3 Component thermal test . 45 9.5 Mechanical immunity testing 45 9.5.1 General . 45 9.5.2 Vibration test . 45 9.5.3 Shock test 45

32、 9.5.4 Performance criterion for mechanical immunity tests (fail safe state FS) 45 9.6 Test documentation . 45 10 Modification . 46 10.1 Objective 46 10.2 Requirements 46 10.2.1 General . 46 10.2.2 Modification request . 46 10.2.3 Impact analysis 46 10.2.4 Authorization 46 10.2.5 Documentation . 46

33、Annex A (informative) Sequential task table 47 Annex B (informative) Example for estimation of PFH . 51 4 IEC 61800-5-2:2016 IEC 2016 B.1 General . 51 B.2 Example PDS(SR) structure 51 B.2.1 General . 51 B.2.2 Subsystem A/B 52 B.2.3 Subsystem PS/VM . 52 B.3 Example PDS(SR) PFH value determination 53

34、B.3.1 Subsystem “A/B” (main subsystem) 53 B.3.2 Subsystem “PS/VM” . 58 B.3.3 PFH value of the safety sub-function STO of PDS(SR) 61 B.4 Reduction of DC and SFF depending on test interval . 62 Annex C (informative) Available failure rate databases . 63 C.1 Databases 63 C.2 Helpful standards concernin

35、g component failure 63 Annex D (informative) Fault lists and fault exclusions . 65 D.1 General . 65 D.2 Remarks applicable to fault exclusions 65 D.2.1 Validity of exclusions 65 D.2.2 Tin whisker growth . 65 D.2.3 Short-circuits on PWB-mounted parts . 65 D.3 Fault models . 66 D.3.1 Conductors/cables

36、 . 66 D.3.2 Printed wiring boards/assemblies . 66 D.3.3 Terminal block . 66 D.3.4 Multi-pin connector . 67 D.3.5 Electromechanical devices . 67 D.3.6 Transformers . 68 D.3.7 Inductances . 68 D.3.8 Resistors . 68 D.3.9 Resistor Networks 68 D.3.10 Potentiometers . 68 D.3.11 Capacitors . 68 D.3.12 Disc

37、rete semiconductors 68 D.3.13 Signal Isolation components . 69 D.3.14 Non-programmable integrated circuits 69 D.3.15 Programmable and/or complex integrated circuits . 69 D.3.16 Motion and position feedback sensors 70 Annex E (normative) Electromagnetic (EM) immunity requirement for PDS(SR) . 74 E.1

38、General . 74 E.2 Immunity requirements low frequency disturbances . 74 E.3 Immunity requirements high frequency disturbances . 77 Annex F (informative) Estimation of PFD avgvalue for low demand with given PFH value 81 F.1 General . 81 F.2 Estimation of PFD avgvalue for low demand with given PFH valu

39、e . 81 Bibliography . 82 Figure 1 Installation and functional parts of a PDS(SR) . 10 Figure 2 Safety function consisting of safety sub-functions 19 IEC 61800-5-2:2016 IEC 2016 5 Figure 3 PDS(SR) development lifecycle 24 Figure B.1 Example PDS(SR) . 51 Figure B.2 Subsystems of the PDS(SR) 52 Figure

40、B.3 Function blocks of subsystem A/B . 53 Figure B.4 Reliability model (Markov) of subsystem A/B 56 Figure B.5 Function blocks of subsystem PS/VM 58 Figure B.6 Reliability model (Markov) of subsystem PS/VM . 60 Table 1 Alphabetical list of terms and definitions 12 Table 2 Example for determining the

41、 SIL from hardware and software independence . 30 Table 3 Safety integrity levels: target failure measures for a PDS(SR) safety sub- function 32 Table 4 Maximum allowable safety integrity level for a safety sub-function carried out by a type A safety-related subsystem 35 Table 5 Maximum allowable sa

42、fety integrity level for a safety sub-function carried out by a type B safety-related subsystem 35 Table A.1 Design and development procedure for PDS(SR) 47 Table B.1 Determination of DC factor of subsystem A/B 55 Table B.2 PFH value calculation results for subsystem A/B . 58 Table B.3 Determination

43、 of DC factor of subsystem A/B 59 Table B.4 PFH value calculation results for subsystem PS/VM 61 Table D.1 Printed wiring boards/assemblies . 66 Table D.2 Terminal block . 67 Table D.3 Multi-pin connector . 67 Table D.4 Electromechanical devices (for example relay, contactor relays) . 68 Table D.5 S

44、ignal Isolation components . 69 Table D.6 Non-programmable integrated circuits 69 Table D.7 Programmable and/or complex integrated circuits . 70 Table D.8 Motion and position feedback sensors 71 Table E.1 Minimum immunity requirements for voltage deviations, dips and short interruptions . 75 Table E

45、.2 PDS(SR) minimum immunity requirements for voltage deviations, dips and short interruptions on main power ports with a rated voltage above 1 000 V . 76 Table E.3 Immunity requirements high frequency disturbances . 77 Table E.4 General frequency ranges for mobile transmitters and ISM for radiated t

46、ests . 79 Table E.5 General frequency ranges for mobile transmitters and ISM for conducted tests . 80 6 IEC 61800-5-2:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ADJUSTABLE SPEED ELECTRICAL POWER DRIVE SYSTEMS Part 5-2: Safety requirements Functional FOREWORD 1) The International Elect

47、rotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields.

48、To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC Nat

49、ional Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement b