IEC 61822-2009 Electrical installations for lighting and beaconing of aerodromes - Constant current regulators《机场照明和航路信标的电气装置.恒流调节器》.pdf

1、 IEC 61822Edition 2.0 2009-05INTERNATIONAL STANDARD NORME INTERNATIONALEElectrical installations for lighting and beaconing of aerodromes Constant current regulators Installations lectriques pour lclairage et le balisage des arodromes Rgulateurs de courant constant IEC61822:2009 THIS PUBLICATION IS

2、COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from eithe

3、r IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droit

4、s de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI

5、du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Genev

6、a 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical

7、content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteri

8、a (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available

9、on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnic

10、al Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CE

11、I La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI e

12、st constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents c

13、ritres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelle

14、s publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues

15、 additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nou

16、s: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61822Edition 2.0 2009-05INTERNATIONAL STANDARD NORME INTERNATIONALEElectrical installations for lighting and beaconing of aerodromes Constant current regulators Installations lectriques pour lclairage et le balisage des arodromes Rg

17、ulateurs de courant constant INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE UICS 29.140.50; 93.120 PRICE CODECODE PRIXISBN 2-8318-1044-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internat

18、ionale 2 61822 IEC:2009 CONTENTS FOREWORD.4 1 Scope.6 2 Normative references6 3 Terms and definitions .7 4 Classification 7 4.1 Output current .7 4.2 Current steps.7 4.3 Ratings7 5 Requirements .8 5.1 General .8 5.2 Environmental requirements 8 5.3 Performance requirements.8 5.3.1 Nominal output cur

19、rent range and tolerances .8 5.3.2 Regulation resistive loading.9 5.3.3 Regulation reactive loading .9 5.3.4 Efficiency.9 5.3.5 Power factor 9 5.3.6 Input voltage9 5.3.7 Load matching .9 5.3.8 Operation 9 5.3.9 Control/Monitoring System .9 5.3.10 Output current surge limitation .11 5.3.11 Dynamic re

20、sponse .11 5.3.12 Output voltage limitation 11 5.3.13 Protective devices11 5.4 Electromagnetic compatibility (EMC)12 5.4.1 Limits for emission.12 5.4.2 Output current waveform12 5.4.3 Limits for immunity.12 5.5 Design requirements12 5.5.1 Local control12 5.5.2 Local indication12 5.5.3 Wiring diagram

21、 12 5.5.4 Mechanical design .12 5.5.5 Electrical design 13 5.5.6 Nameplate .14 5.5.7 Instruction manual .14 5.6 Protection against electric shock14 5.7 Optional accessories .15 5.7.1 Earth fault monitor .15 5.7.2 Load indicator15 5.7.3 Lamp fault indicator .15 5.7.4 Output lightning arrestors.16 5.7

22、.5 Field circuit isolator16 5.7.6 Non-illumination current step16 5.7.7 Out of range indicator 16 61822 IEC:2009 3 5.7.8 Output ammeter.16 5.7.9 Short circuit protection .16 5.7.10 Serial wiring.17 6 Qualification and test requirements .17 6.1 Type tests .17 6.2 Routine tests .17 7 Tests description

23、 for tests.18 7.1 Visual inspection .18 7.2 Protection against electric shock19 7.2.1 Verification of protection by enclosures 19 7.2.2 Verification of clearances and creepage distances .19 7.3 Dielectric test 19 7.3.1 Dielectric strength19 7.3.2 Basic impulse insulation level (BIL) test for power t

24、ransformer .19 7.4 Enclosure temperature test19 7.5 Test of protective devices 20 7.5.1 Open circuit test 20 7.5.2 Overcurrent test.21 7.6 Operation test21 7.7 Performance test .22 7.7.1 Regulation test.22 7.7.2 Efficiency testing22 7.7.3 Power factor 23 7.7.4 Output current surge limitation .23 7.7

25、.5 Dynamic response .23 7.7.6 Power supply interruptions and voltage dips .23 7.7.7 Mechanical operation test 23 7.7.8 Electromagnetic compatibility (EMC) 24 7.7.9 Lightning arrestors.24 7.8 Environmental tests .24 7.8.1 Low temperature24 7.8.2 High temperature .25 7.9 Optional accessories .25 Figur

26、e 1 Nameplate14 Figure 2 Open circuit test schematic diagram .20 Table 1 Standard CCR output current step pre-settings 8 Table 2 CCR remote control/monitoring functions .10 Table 3 Lamp failure indicator 15 Table 4 Type and routine tests .18 Table 5 BIL test19 Table 6 Resistive loading test.22 Table

27、 7 Reactive loading test .22 4 61822 IEC:2009 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES CONSTANT CURRENT REGULATORS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comp

28、rising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Stan

29、dards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prep

30、aratory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organi

31、zations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form o

32、f recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretatio

33、n by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regio

34、nal publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publ

35、ication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect,

36、 or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the cor

37、rect application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61822 has been prepared by

38、 IEC Technical Committee 97: Electrical installations for lighting and beaconing of aerodromes. This second edition cancels and replaces the first edition published in 2002. It is a technical revision. This edition includes the following significant technical changes with respect to the previous edi

39、tion: a) revision and update of terms and definitions; b) addition of new paragraphs, such as “Nominal output current range and tolerances“; c) modification of some paragraphs, such as those related to “Local control“ and “Remote control“; d) deletion of some paragraphs, in particular “Power transfo

40、rmers“ and “Output current indicator“. 61822 IEC:2009 5 The text of this standard is based on the following documents: FDIS Report on voting 97/135/FDIS 97/139/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This

41、 publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific pub

42、lication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 61822 IEC:2009 ELECTRICAL INSTALLATIONS FOR LIGHTING AND BEACONING OF AERODROMES CONSTANT CURRENT REGULATORS 1 Scope This International Standard specifies the requirements for a Const

43、ant Current Regulator (CCR) having a nominal output of 6,6 A for use in an aeronautical ground lighting constant current series circuit. However, CCRs may be manufactured which have a different power rating (kVA) and current steps than those specified in this standard in order to be used on existing

44、 circuits. This standard should be applied where appropriate for these CCRs. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the refer

45、enced document (including any amendments) applies. IEC 60038, IEC standard voltages IEC 60439-1:1999, Low-voltage switchgear and control gear assemblies Part 1: Type-tested and partially type-tested assemblies IEC 60529, Degrees of protection provided by enclosures (IP Code) IEC 61000-6-2, Electroma

46、gnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments IEC 61000-6-4, Electromagnetic compatibility (EMC) Part 6-4: Generic standards Emission standard for industrial environments IEC/TS 61000-6-5, Electromagnetic compatibility (EMC) Part 6-5: Generic standards I

47、mmunity for power station and substation environments IEC 61024-1, Protection of structures against lightning Part 1: General principles IEC 61140, Protection against electric shock Common aspects for installation and equipment IEC 61439-1:2009, Low-voltage switchgear and controlgear assemblies Part

48、 1: General rules IEC 62305-1, Protection against lightning Part 1: General principles IEC 62305-3, Protection against lightning Part 3: Physical damage to structures and life hazard CISPR 11, Industrial, scientific and medical (ISM) radio-frequency equipment Electromagnetic disturbance characterist

49、ics Limits and methods of measurement CISPR 22, Information technology equipment Radio disturbance characteristics Limits and methods of measurement 61822 IEC:2009 7 3 Terms and definitions For the purposes of this document, the following terms and definitions developed to be included in international standards relating to airport/aerodrome visual aids apply 3.1 aerona