IEC 61850-7-3-2010 Communication networks and systems for power utility automation - Part 7-3 Basic communication structure - Common data classes《功率效用自动控制用通信网络和系统.第7-3部分 基本通信结构.公用数据类别》.pdf

1、 IEC 61850-7-3 Edition 2.0 2010-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Communication networks and systems for power utility automation Part 7-3: Basic communication structure Common data classes Rseaux et systmes de communication pour lautomatisation des systmes lectriques Partie 7-3: Struct

2、ure de communication de base Classes de donnes communes IEC 61850-7-3:2010 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any me

3、ans, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication

4、, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mca

5、nique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou conta

6、ctez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes Internati

7、onal Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of I

8、EC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to dat

9、e on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in Engl

10、ish and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Serv

11、ice Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et

12、 aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub

13、/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub R

14、estez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient p

15、lus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des comment

16、aires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61850-7-3 Edition 2.0 2010-12 INTERNATIONAL STANDARD NORME INTERNATIONALE Communication networks and systems for power util

17、ity automation Part 7-3: Basic communication structure Common data classes Rseaux et systmes de communication pour lautomatisation des systmes lectriques Partie 7-3: Structure de communication de base Classes de donnes communes INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE IN

18、TERNATIONALE XD ICS 33.200 PRICE CODE CODE PRIX ISBN 978-2-88912-258-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale colour inside 2 61850-7-3 IEC:2010 CONTENTS FORE WORD 6 INTRODUCTION 8 1 Scop e 9 2 Normative ref

19、erences 9 3 Terms and definitions 10 4 Abbreviated terms 10 5 Conditions for attribute inclusion 10 6 Constructed attribute classes . 11 6.1 General . 11 6.2 Quality 11 6.2.1 Overview 11 6.2.2 Va lidity . 12 6.2.3 Detail quality 13 6.2.4 Source . 14 6.2.5 Test . 14 6.2.6 Frozen by operator 14 6.2.7

20、Quality in the client server context 15 6.2.8 Relation between quality identifiers . 16 6.3 Analogue value 18 6.4 Configuration of analogue value 18 6.5 Range configuration . 19 6.6 Step position with transient indication. 19 6.7 Pulse configuration. 20 6.8 Originator 20 6.9 Unit definition 21 6.10

21、Vector definition . 21 6.11 Point definition . 22 6.12 CtlModels definition 22 6.13 SboClasses definition . 22 6.14 Cell. 22 6.15 CalendarTime definition 23 7 Common data class specifications 25 7.1 General . 25 7.2 Name spaces . 25 7.3 Common data class specifications for status information 25 7.3.

22、1 Application of services . 25 7.3.2 Single point status (SPS) . 26 7.3.3 Double point status (DPS) 27 7.3.4 Integer status (INS) . 27 7.3.5 Enumerated status (ENS). 28 7.3.6 Protection activation information (ACT) . 28 7.3.7 Directional protection activation information (ACD) . 29 7.3.8 Security vi

23、olation counting (SEC) 30 7.3.9 Binary counter reading (BCR) . 30 7.3.10 Histogram (HST) . 31 61850-7-3 IEC:2010 3 7.3.11 Visible string status (VSS) 31 7.4 Common data class specifications for measurand information . 32 7.4.1 Application of services . 32 7.4.2 Measured value (MV) 33 7.4.3 Complex m

24、easured value (CMV) . 34 7.4.4 Sampled value (SAV) 35 7.4.5 Phase to ground/neutral related measured values of a three-phase system (WYE) . 36 7.4.6 Phase to phase related measured values of a three-phase system (DEL) . 37 7.4.7 Sequence (SEQ) . 38 7.4.8 Harmonic value (HMV) . 39 7.4.9 Harmonic valu

25、e for WYE (HWYE) . 40 7.4.10 Harmonic value for DEL (HDEL) . 41 7.5 Common data class specifications for controls 42 7.5.1 Application of services . 42 7.5.2 Controllable single point (SPC) . 43 7.5.3 Controllable double point (DPC) . 44 7.5.4 Controllable integer status (INC) . 45 7.5.5 Controllabl

26、e enumerated status (ENC) 46 7.5.6 Binary controlled step position information (BSC) . 47 7.5.7 Integer controlled step position information (ISC) . 48 7.5.8 Controllable analogue process value (APC) . 49 7.5.9 Binary controlled analog process value (BAC) 50 7.6 Common data class specifications for

27、status settings . 51 7.6.1 Application of services . 51 7.6.2 Single point setting (SPG) 51 7.6.3 Integer status setting (ING) 52 7.6.4 Enumerated status setting (ENG) 52 7.6.5 Object reference setting (ORG) 53 7.6.6 Time setting group (TSG) . 53 7.6.7 Currency setting group (CUG) 54 7.6.8 Visible s

28、tring setting (VSG) 54 7.7 Common data class specifications for analogue settings 55 7.7.1 Application of services . 55 7.7.2 Analogue setting (ASG) . 56 7.7.3 Setting curve (CURVE) 57 7.7.4 Curve shape setting (CSG) 58 7.8 Common data class specifications for description information . 59 7.8.1 Appl

29、ication of services . 59 7.8.2 Device name plate (DPL) . 60 7.8.3 Logical node name plate (LPL) . 61 7.8.4 Curve shape description (CSD). 62 8 Data attribute semantic . 63 Annex A (normative) Value range for units and multiplier . 78 Annex B (informative) Functional constraints 81 Annex C (normative

30、) Tracking of configuration revisions . 83 Annex D (normative) SCL enumerations . 84 4 61850-7-3 IEC:2010 Bibliography . 90 Figure 1 Quality identifiers in a single client-server relationship 15 Figure 2 Quality identifiers in a multiple client-server relationship . 15 Figure 3 Interaction of substi

31、tution and validity . 17 Figure 4 Configuration of command output pulse . 20 Figure 5 Cell definition . 23 Figure 6 Two-dimensional curve represented by CSG 58 Figure 7 Two-dimensional shape created by multiple CSG . 59 Table 1 Conditions for presence of attributes 10 Table 2 Quality 12 Table 3 Rela

32、tion of the detailed quality identifiers with invalid or questionable quality . 13 Table 4 Analogue value 18 Table 5 Configuration of analogue value 18 Table 6 Range configuration . 19 Table 7 Step position with transient indication 19 Table 8 Pulse configuration 20 Table 9 Originator 21 Table 10 Va

33、lues for orCat . 21 Table 11 Unit 21 Table 12 Vector . 21 Table 13 Point . 22 Table 14 Cell . 23 Table 15 CalendarTime 24 Table 16 Semantic interpretation of calendar time settings . 24 Table 17 Name space attributes 25 Table 18 Basic status information template. 26 Table 19 Single point status comm

34、on data class definition . 26 Table 20 Double point status common data class specification . 27 Table 21 Integer status common data class specification . 27 Table 22 Enumerated status common data class specification 28 Table 23 Protection activation information common data class specification. 28 Ta

35、ble 24 Directional protection activation information common data class specification. 29 Table 25 Security violation counting common data class specification . 30 Table 26 Binary counter reading common data class specification 30 Table 27 Histogram common data class specification 31 Table 28 Visible

36、 string status common data class definition . 31 Table 29 Basic measurand information template . 32 Table 30 Measured value . 33 Table 31 Complex measured value 34 Table 32 Sampled value . 35 61850-7-3 IEC:2010 5 Table 33 WYE . 36 Table 34 Delta . 37 Table 35 Sequence 38 Table 36 Harmonic value 39 T

37、able 37 Harmonic values for WYE . 40 Table 38 Harmonic values for delta 41 Table 39 Basic controllable status information template . 42 Table 40 Controllable single point 43 Table 41 Controllable double point 44 Table 42 Controllable integer status 45 Table 43 Controllable enumerated status . 46 Tab

38、le 44 Binary controlled step position information 47 Table 45 Integer controlled step position information . 48 Table 46 Controllable analogue process value 49 Table 47 Binary controlled analog process value . 50 Table 48 Basic status setting template . 51 Table 49 Single point setting . 51 Table 50

39、 Integer status setting 52 Table 51 Enumerated status setting . 52 Table 52 Object reference setting common data class specification 53 Table 53 Time setting group common data class specification 53 Table 54 Currency setting group common data class specification 54 Table 55 Visible string setting gr

40、oup common data class specification . 54 Table 56 Basic analogue setting template 55 Table 57 Analogue setting 56 Table 58 Setting curve . 57 Table 59 Curve shape setting 58 Table 60 Basic description information template . 59 Table 61 Device name plate common data class specification 60 Table 62 Lo

41、gical node name plate common data class specification 61 Table 63 Curve shape description common data class specification 62 Table 64 Semantics of data attributes and data. 63 Table A.1 SI units: base units . 78 Table A.2 SI units: derived units 78 Table A.3 SI units: extended units . 79 Table A.4 S

42、I units: industry specific units . 79 Table A.5 Multiplier 80 Table B.1 Functional constraints . 82 6 61850-7-3 IEC:2010 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COMMUNICATION NETWORKS AND SYSTEMS FOR POWER UTILITY AUTOMATION Part 7-3: Basic communication structure Common data classes FOREWORD 1)

43、 The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical

44、 and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical

45、 committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organizat

46、ion for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical com

47、mittee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications

48、is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity asse