IEC 61987-21-2015 Industrial-process measurement and control - Data structures and elements in process equipment catalogues - Part 21 List of Properties (LOP) of automated valves f.pdf

1、 IEC 61987-21 Edition 1.0 2015-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 21: List of Properties (LOP) of automated valves for electronic data exchange Generic structures Mesure et comman

2、de dans les processus industriels Structures de donnes et lments dans les catalogues dquipement de processus Partie 21: Liste de proprits (LOP) des vannes automatises pour lchange lectronique de donnes Structures gnriques IEC 61987-21:2015-09(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright

3、2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National

4、Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf

5、 indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez

6、 des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-121

7、1 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content

8、 of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC

9、 International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technic

10、al committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electrope

11、dia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC

12、Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Se

13、rvice Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publi

14、e des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peu

15、t avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Re

16、cherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webs

17、tore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. I

18、l contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 000 entres terminologiques lectrotechniqu

19、es, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cet

20、te publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 61987-21 Edition 1.0 2015-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Industrial-process measurement and control Data structures and elements in process equipment catalogues Part 21: List of Properties (LOP) of automated

21、valves for electronic data exchange Generic structures Mesure et commande dans les processus industriels Structures de donnes et lments dans les catalogues dquipement de processus Partie 21: Liste de proprits (LOP) des vannes automatises pour lchange lectronique de donnes Structures gnriques INTERNA

22、TIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 01.110; 25.040.40; 35.240.50 ISBN 978-2-8322-2891-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtain

23、ed this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 61987-21:2015 IEC 2015 CONTENTS FOREWORD . 5 INTRODUCTION . 7 General. 7 Device type dictionary . 7 1 Scope 8 2 Normative references 8 3 Terms an

24、d definitions 9 4 General . 9 4.1 Characterization scheme. 9 4.2 OLOP and DLOP 10 4.3 Cardinality and polymorphism . 11 5 Operating List of Properties (OLOP) 11 5.1 Generic block structure . 11 5.2 Base conditions 12 5.3 Process case 12 5.3.1 General . 12 5.3.2 Process conditions for final control e

25、lements . 13 5.3.3 Other process case variable 13 5.4 Operating conditions for device design 13 5.4.1 General . 13 5.4.2 Installation design conditions . 14 5.4.3 Environmental design conditions 14 5.4.4 Process design conditions . 15 5.4.5 Design conditions for valve body assembly 15 5.4.6 Pressure

26、-temperature design conditions 15 5.5 Process equipment . 15 5.5.1 General . 15 5.5.2 Line or nozzle 16 5.6 Physical location . 16 5.6.1 General . 16 5.6.2 Available power supply 16 5.6.3 Process criticality classification . 16 5.6.4 Area classification . 16 6 Device List of Properties (DLOP) . 17 6

27、.1 Basic structure 17 6.1.1 General . 17 6.1.2 Generic block structure 17 6.1.3 Relationship to IEC 61987-1 19 6.2 Identification . 19 6.3 Application 19 6.4 Parameters of 19 6.5 Function and system design 19 6.5.1 General . 19 6.5.2 Dependability . 19 IEC 61987-21:2015 IEC 2015 3 6.6 Input . 19 6.6

28、.1 General . 19 6.6.2 Control input 20 6.6.3 Type of auxiliary input 20 6.7 Output. 21 6.7.1 General . 21 6.7.2 Type of output . 21 6.8 Digital communication . 22 6.8.1 General . 22 6.8.2 Digital communication interface . 22 6.9 Performance . 23 6.9.1 General . 23 6.9.2 Reference conditions for the

29、device . 23 6.9.3 Performance variable . 23 6.10 Rated operating conditions . 24 6.10.1 General . 24 6.10.2 Installation conditions 24 6.10.3 Environmental design ratings . 25 6.10.4 Process design ratings 25 6.10.5 Pressure-temperature design ratings . 26 6.11 Mechanical and electrical construction

30、 26 6.11.1 General . 26 6.11.2 Overall dimensions and weight 26 6.11.3 Structural design . 26 6.11.4 Explosion protection design approval . 26 6.11.5 Codes and standards approval 26 6.12 Operability 27 6.12.1 General . 27 6.12.2 Basic configuration 27 6.12.3 Parametrization . 27 6.12.4 Adjustment 27

31、 6.12.5 Operation 27 6.12.6 Diagnosis 27 6.13 Power supply 27 6.14 Certificates and approvals. 27 6.15 Component part identifications 28 7 Composite devices 28 8 Additional aspects . 28 Annex A (informative) Device type dictionary Classification of final control elements 29 Bibliography 33 Figure 1

32、Characterization of final control elements on the basis of IEC 60534-1 9 Figure 2 Characterization of actuators . 10 Figure 3 Assignment of OLOP and DLOPs for valve body assembly . 10 Figure 4 Assignment of OLOP and DLOPs for actuators 11 Table 1 Generic block structure of an OLOP 12 4 IEC 61987-21:

33、2015 IEC 2015 Table 2 Generic block structure of a DLOP 18 Table A.1 Classification scheme for final control elements . 29 IEC 61987-21:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS MEASUREMENT AND CONTROL DATA STRUCTURES AND ELEMENTS IN PROCESS EQUIPMENT CATALOGUES

34、Part 21: List of Properties (LOP) of automated valves for electronic data exchange Generic structures FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The obj

35、ect of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specificati

36、ons (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liai

37、sing with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters expres

38、s, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committe

39、es in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National

40、Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not

41、provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the

42、 latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever,

43、 whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications

44、is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IE

45、C 61987-21 has been prepared by subcommittee 65B: Measurement and control devices, of IEC technical committee 65: Industrial-process measurement, control and automation. The text of this standard is based on the following documents: FDIS Report on voting 65B/996/FDIS 65B/1024/RVD Full information on

46、 the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 6 IEC 61987-21:2015 IEC 2015 A list of all parts in the IEC 61987 series, published under the general

47、title Industrial-process measurement and control Data structures and elements in process equipment catalogues, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/web

48、store.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 61987-21:2015 IEC 2015 7 INTRODUCTION General The exchange of product data between companies, business systems, engineering tool

49、s, data systems within companies and, in the future, control systems (electrical, measuring and control technology) can run smoothly only when both the information to be exchanged and the use of this information have been clearly defined. Prior to this standard, requirements on process control devices and systems were specified by customers in various ways when suppliers or m