IEC 61995-2-2009 Devices for the connection of luminaires for household and similar purposes - Part 2 Standard sheets for DCL《家用和类似用途灯具的连接设备.第2部分 DCL用标准清单》.pdf

1、 IEC 61995-2Edition 1.0 2009-02INTERNATIONAL STANDARD NORME INTERNATIONALEDevices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCL Dispositifs de connexion pour luminaires pour usage domestique et analogue Partie 2: Feuilles de norme pour DCL IEC619

2、95-2:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without pe

3、rmission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee

4、for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI o

5、u du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office

6、3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About I

7、EC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to

8、search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new pub

9、lications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as th

10、e International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41

11、22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu techniqu

12、e des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des reche

13、rches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille d

14、eux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les term

15、es quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Se

16、rvice clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 61995-2Edition 1.0 2009-02INTERNATIONAL STANDARD NORME INTERNATIONALEDevices for the connection of luminaires for household and similar purposes Part 2: Standard sheets for DCL Dispositifs de connexion

17、pour luminaires pour usage domestique et analogue Partie 2: Feuilles de norme pour DCL INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE LICS 29.120.20; 29.140.40 PRICE CODECODE PRIXISBN 2-8318-1026-6 Registered trademark of the International Electrotechnical Commi

18、ssion Marque dpose de la Commission Electrotechnique Internationale 2 61995-2 IEC:2009 CONTENTS FOREWORD.3 1 Scope.5 2 Normative references .5 3 Requirements and tests5 4 Standard sheets .5 Figure 1 Example of use of a DCL socket and a DCL plug inserted in a flush type box in a ceiling 11 61995-2 IE

19、C:2009 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES Part 2: Standard sheets for DCL FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national ele

20、ctrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specif

21、ications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internati

22、onal, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal

23、decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for i

24、nternational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) I

25、n order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall b

26、e clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liabilit

27、y shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (includin

28、g legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of thi

29、s publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61995-2 has been prepared by subcommittee 23B: Pl

30、ugs, socket-outlets and switches, of IEC technical committee 23: Electrical accessories. The text of this standard is based on the following documents: FDIS Report on voting 23B/919/FDIS 23B/925/RVDFull information on the voting for the approval of this standard can be found in the report on voting

31、indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 61995-2 IEC:2009 This standard is to be read in conjunction with IEC 61995-1. A list of all the parts in the IEC 61995 series, under the general title Devices for the connection of lu

32、minaires for household and similar purposes, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific public

33、ation. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61995-2 IEC:2009 5 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES Part 2: Standard sheets for DCL 1 Scope This part of IEC 61995, which is to be read in conjun

34、ction with IEC 61995-1, applies to devices for the connection of luminaires (DCL) 250 V, 6 A a.c. intended for household and similar purposes, for the electrical connection to final circuits rated not more than 16 A, without providing mechanical support for the luminaire. 2 Normative references The

35、following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61995-1:2005, Devices for the connection of lumin

36、aires for household and similar purposes Part 1: General requirements 3 Requirements and tests Devices for the connection of luminaires shall comply with all the relevant requirements of Part 1 (IEC 61995-1). In particular, devices for the connection of luminaires classified according to 7.1 a) in P

37、art 1 shall comply with the relevant standard sheets of this Part 2; these devices require provision of information in accordance with Subclause 8.3 of Part 1; these devices shall comply with Clause 20 of Part 1 with the following modification. Replacement of the last two paragraphs in Clause 20 of

38、Part 1 by the following new paragraph: In no single movement shall the force required to insert or withdraw the plug exceed 50 N nor shall it be less than 10 N. 4 Standard sheets This part contains the following Standard Sheets: Standard Sheet 1-1: DCL outlet, 6 A 250 V a.c. 2 P + E Standard Sheet 1

39、-2: DCL plug, 6 A 250 V a.c. 2 P + E Standard Sheet 1-3: DCL plug, 6 A 250 V a.c. 2 P Standard sheet 1-4: Gauge for testing DCL plug functions This part of IEC 61995 contains also an example of the use of the above DCL inserted in a flush type box in a ceiling (see Figure 1). 6 61995-2 IEC:2009 DEVI

40、CES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-1 DCL OUTLET 6 A 250 V a.c. 2 P + Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability. Radius without dimensions: 0,5 mm max. 1 This dimension con

41、cerns only the flush type DCL outlet. 2 The overall dimension of the DCL outlet shall be less than or equal to 40 mm. 3 Entry holes slightly rounded or sloped to ensure an easy introduction of the pins of the DCL plug. 4 Angle +5,005,0 concerns also chamfers. IEC 136/09 61995-2 IEC:2009 7 DEVICES FO

42、R THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-2 DCL PLUG 6 A 250 V a.c. 2 P + Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability. Radius without dimensions: 0,5 mm min. 1 This part shall be resilie

43、nt. 2 The section of the pins of the DCL plug shall have the same dimensions. 3 The retention means shall be designed by the DCL plug manufacturer to ensure the withdrawal force according to Clause 3. 4 The DCL plug shall enter without undue force into the min. gauge, representing the smallest possi

44、ble entry hole. 5 The pins of the DCL plug shall be slightly rounded or sloped to ensure their easy introduction in the entry holes of the DCL outlet. 6 This dimension shall be kept within 6 mm min. from the reference face C. IEC 137/09 8 61995-2 IEC:2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR

45、 HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-3 DCL PLUG 6 A 250 V a.c. 2 P Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability. IEC 138/09 61995-2 IEC:2009 9 Radius without dimensions : 0,5 mm min. 1 This part shall be resilient. 2

46、 The section of the pins of the DCL plug shall have the same dimensions. 3 The retention means shall be designed by the DCL plug manufacturer to ensure the withdrawal force according to Clause 3. 4 The DCL plug shall enter without undue force into the min. gauge, representing the smallest possible e

47、ntry hole. 5 The pins of the DCL plug shall be slightly rounded or sloped to ensure their easy introduction in the entry holes of the DCL outlet. 6 This dimension shall be kept within 6 mm min. from the reference face C. 7 This dummy pin shall be of insulating material. 8 These dimensions apply to L

48、 and N pins. 10 61995-2 IEC:2009 DEVICES FOR THE CONNECTION OF LUMINAIRES FOR HOUSEHOLD AND SIMILAR PURPOSES STANDARD SHEET 1-4 Gauge for testing DCL plug functions Dimensions in millimetres The drawing is intended only to illustrate the dimensions essential for interchangeability. SECTION: C-CAA3+0

49、,0504chamfers3000,5 conic4 chamfersBR0,5intheedges24,3+0,020CCC0,50,030,50,0315,20-0,02B6,350-0,021,05+0,02+0,014,50,0110,50,019,25+0,01012,90,0113,350-0,017,57,53 entry hole0,01 C A B0,50,03 0,50,0330,30,010,01 A0,01 C A B3 entry hole10,1D107,8+0,020+0,10,01 C0,01 CSECTION: A-A SECTION:B-B+x 300,03-A0,1max. chamferedor roundedDETAIL: FB1.25+0.02+020.1DETAIL: DFPURPOSE: