1、 INTERNATIONAL STANDARD IECCEINORME INTERNATIONALE62026-1Second editionDeuxime dition2007-06Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 1: General rules Appareillage basse tension Interfaces appareil de commande-appareil (CDI) Partie 1: Rgles gnrales Reference num
2、ber Numro de rfrence IEC/CEI 62026-1:2007 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2007 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photoc
3、opying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your loca
4、l IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilm
5、s, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays
6、de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic a
7、nd related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC o
8、n-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published d
9、etails twice a month all new publications released. Available on-line and also by email. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: cscie
10、c.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des
11、 publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la
12、 CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publication
13、s de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visite
14、z le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 INTERNATIONAL STANDARD IECCEINORME INTERNATIONALE62026-1Second editionDeuxime dition2007-06Low-voltage switchgear and controlgear Controller-device interfaces (CDIs) Part 1: General rules Appa
15、reillage basse tension Interfaces appareil de commande-appareil (CDI) Partie 1: Rgles gnrales M Commission Electrotechnique InternationaleInternational Electrotechnical Commission PRICE CODE CODE PRIX For price, see current cataloguePour prix, voir catalogue en vigueur 2 62026-1 IEC:2007 CONTENTS FO
16、REWORD.3 INTRODUCTION.5 1 Scope.6 2 Normative references6 3 Terms and definitions .7 4 Classifications 8 5 Characteristics8 5.1 CDI components8 5.2 Interfaces 8 5.3 Topology .9 5.4 Information exchanges.9 5.5 Attributes.9 6 Product information.9 6.1 Instructions for installation, operation and maint
17、enance9 6.2 Profiles9 6.3 Marking .9 6.4 Degree of protection 10 7 Normal service, mounting and transport conditions10 7.1 General .10 7.2 Normal service conditions10 7.2.1 General .10 7.2.2 Ambient air temperature.10 7.2.3 Altitude 10 7.2.4 Climatic conditions.10 7.3 Conditions during transport and
18、 storage.10 7.4 Mounting .11 8 Constructional and performance requirements 11 8.1 General .11 8.2 Electromagnetic compatibility (EMC)11 8.2.1 Immunity11 8.2.2 Emission12 8.2.3 EMC tests12 9 Tests 12 9.1 General .12 9.2 Type tests .12 9.3 Electromagnetic compatibility.12 Table 1 Immunity requirements
19、 11 62026-1 IEC:2007 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR CONTROLLER-DEVICE INTERFACES (CDIs) Part 1: General rules FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national
20、electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Spe
21、cifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Intern
22、ational, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The form
23、al decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations fo
24、r international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4
25、) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shal
26、l be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liabi
27、lity shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (inclu
28、ding legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of
29、this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62026-1 has been prepared by subcommittee 17B:
30、 Low-voltage switchgear and controlgear, of IEC technical committee 17: Switchgear and controlgear. This second edition of IEC 62026-1 cancels and replaces the first edition published in 2000. It represents some general updating without technical changes with regard to the previous edition. The text
31、 of this standard is based on the following documents: CDV Report on voting 17B/1505/CDV 17B/1544/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. 4 62026-1 IEC:2007 This publication has been drafted in accordance
32、 with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 62026, under the general title Low-voltage switchgear and controlgear Controller-device interfaces (CDIs), can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until
33、 the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch” in the data related to the specific publication. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 62026-1 IEC:2007 5 INTRODUCTION The class of controller-d
34、evice interfaces (CDIs) covered in this International Standard includes industrial CDIs for control systems, factory automation and process automation. Industrial CDIs have proliferated to meet specific user needs, but no single CDI meets all needs. The reason for multiple solutions is the wide rang
35、e of physical, usage, information content and configuration requirements. The physical requirements have resulted in CDIs with widely differing signal and line conditioning mechanisms in order to meet distance, node count and environmental considerations. While there is wide variation in CDI technol
36、ogies, there are common components, interfaces and environmental requirements that are specified by this standard. Standardized definitions of these common CDI requirements assist the user to compare and select technologies to match the distance, node count, throughout and installation requirements
37、for a specific application. This standard simplifies the CDI selection process by providing a common structure for generating a specific CDIs IEC standard while also allowing specific interface features and capabilities to be included. Clauses 1 to 8 contain the outline of general requirements that
38、the CDIs IEC standard identifies. Clause 9 contains the test specification. Standardization of CDI aspects also simplifies the task of writing the software for the higher layer functions of industrial control systems, such as supervisory control, operator interface and control strategy programming.
39、For this standard to be complete and usable, it requires the availability of specific CDI standards, which make up the other parts of the IEC 62026 series. 6 62026-1 IEC:2007 LOW-VOLTAGE SWITCHGEAR AND CONTROLGEAR CONTROLLER-DEVICE INTERFACES (CDIs) Part 1: General rules 1 Scope This International S
40、tandard applies to interfaces between low-voltage switchgear, controlgear, and controllers (e.g. programmable controllers, personal computers, etc.). This standard does not apply to higher level industrial communication networks that have become known as fieldbuses and are considered by IEC subcommi
41、ttee 65C. The purpose of this standard is to harmonize and define rules, components and requirements of a general nature applicable to industrial CDIs. Those features of the various CDI standards which can be considered as general have therefore been brought together in this part of IEC 62026. For e
42、ach CDI, two main documents are necessary to determine all requirements and tests: a) this part, referred to as “IEC 62026-1” or “Part 1” in the relevant CDI parts covering the various types of CDIs; b) the specific CDI part of the IEC 62026 series. A specific CDI part may omit a general requirement
43、 if it is not applicable, or it may add to it if it is inadequate in the particular case, but it should not deviate from the requirement unless there is substantial technical justification. NOTE Product-specific requirements for products incorporating a CDI are given in the relevant product standard
44、s. These requirements apply in addition to those given in this International Standard. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of
45、 the referenced document (including any amendments) applies. IEC 60947-1:2007, Low-voltage switchgear and controlgear Part 1: General rules IEC 61000-4-2:1995, Electromagnetic compatibility (EMC) Part 4-2: Testing and measure-ment techniques Electrostatic discharge immunity test Amendment 1 (1998) A
46、mendment 2 (2000) IEC 61000-4-3:2006, Electromagnetic compatibility (EMC) Part 4-3: Testing and measure-ment techniques Radiated radio-frequency electromagnetic field immunity test IEC 61000-4-4:2004, Electromagnetic compatibility (EMC) Part 4-4: Testing and measure-ment techniques Electrical fast t
47、ransient/burst immunity test IEC 61000-4-5:2005, Electromagnetic compatibility (EMC) Part 4-5: Testing and measure-ment techniques Surge immunity test 62026-1 IEC:2007 7 EC 61000-4-6:2003, Electromagnetic compatibility (EMC) Part 4-6: Testing and measurement techniques Immunity to conducted disturba
48、nces, induced by radio-frequency fields Amendment 1 (2004) Amendment 2 (2006) IEC 61000-6-2:2005, Electromagnetic compatibility (EMC) Part 6-2: Generic standards Immunity for industrial environments CISPR 11:2003, Industrial, scientific and medical (ISM) radio-frequency equipment Electromagnetic dis
49、turbance characteristics Limits and methods of measurement Amendment 1 (2004) Amendment 2 (2006) 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 change of state process of data exchange which occurs only when a devices or controllers data changes state according to specific change criteri
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1