IEC 62032-2012 Guide for the Application Specification and Testing of Phase-Shifting Transformers《移相变压器的应用、规范和测试指南》.pdf

1、 IEC 62032 Edition 2.0 2012-06 INTERNATIONAL STANDARD Guide for the Application, Specification, and Testing of Phase-Shifting Transformers IEC 62032:2012(E) IEEE Std. C57.135:2011 IEEE Std C57.135 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEEE All rights reserved. IEEE is a registered t

2、rademark in the U.S. Patent any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEEE Standards documents are developed with

3、in IEEE Societies and Standards Coordinating Committees of the IEEE Standards Association (IEEE-SA) Standards Board. IEEE develops its standards through a consensus development process, which brings together volunteers representing varied viewpoints and interests to achieve the final product. Volunt

4、eers are not necessarily members of IEEE and serve without compensation. While IEEE administers the process and establishes rules to promote fairness in the consensus development process, IEEE does not independently evaluate, test, or verify the accuracy of any of the information contained in its st

5、andards. Use of IEEE Standards documents is wholly voluntary. IEEE documents are made available for use subject to important notices and legal disclaimers (see http:/standards.ieee.org/IPR/disclaimers.html for more information). IEC collaborates closely with IEEE in accordance with conditions determ

6、ined by agreement between the two organizations. 2) The formal decisions of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. The forma

7、l decisions of IEEE on technical matters, once consensus within IEEE Societies and Standards Coordinating Committees has been reached, is determined by a balanced ballot of materially interested parties who indicate interest in reviewing the proposed standard. Final approval of the IEEE standards do

8、cument is given by the IEEE Standards Association (IEEE-SA) Standards Board. 3) IEC/IEEE Publications have the form of recommendations for international use and are accepted by IEC National Committees/IEEE Societies in that sense. While all reasonable efforts are made to ensure that the technical co

9、ntent of IEC/IEEE Publications is accurate, IEC or IEEE cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications (including IEC/IEEE Publica

10、tions) transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC/IEEE Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC and IEEE do not provide any attestation of conformi

11、ty. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC and IEEE are not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this p

12、ublication. 7) No liability shall attach to IEC or IEEE or their directors, employees, servants or agents including individual experts and members of technical committees and IEC National Committees, or volunteers of IEEE Societies and the Standards Coordinating Committees of the IEEE Standards Asso

13、ciation (IEEE-SA) Standards Board, for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC/IEEE Publication or any other IEC or I

14、EEE Publications. 8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that implementation of this IEC/IEEE Publication may require us

15、e of material covered by patent rights. By publication of this standard, no position is taken with respect to the existence or validity of any patent rights in connection therewith. IEC or IEEE shall not be held responsible for identifying Essential Patent Claims for which a license may be required,

16、 for conducting inquiries into the legal validity or scope of Patent Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non-discriminatory. Users of this standard ar

17、e expressly advised that IEC 62032:2012 IEEE Std C57.135-2011 v Published by IEC under license from IEEE. 2011 IEEE. All rights reserved. determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. International Standard IEC

18、62032/ IEEE Std C57.135-2011 has been processed through IEC technical committee 14: Power transformers, under the IEC/IEEE Dual Logo Agreement. This second edition cancels and replaces the first edition, published in 2005, and constitutes a technical revision. The text of this standard is based on t

19、he following documents: IEEE Std FDIS Report on voting IEEE Std C57.135-2011 14/710/FDIS 14/714/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The IEC Technical Committee and IEEE Technical Committee have decide

20、d that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended.

21、 IEC 62032:2012 vi IEEE Std C57.135-2011 Published by IEC under license from IEEE. 2011 IEEE. All rights reserved. IEEE Std C57.135-2011 (Revision of IEEE Std C57.135-2001) IEEE Guide for the Application, Specification, and Testing of Phase- Shifting Transformers Sponsor Transformers Committee of th

22、e IEEE Power & Energy Society Approved 16 June 2011 IEEE-SA Standards Board Abstract: Theory, application of phase-shifting transformers, and the difference of specification and testing to standard system transformers are described in this guide. Various types of phase- shifting transformers and how

23、 to select the optimal design to achieve required control of power flow are covered. An understanding of the terminology, types, construction, and testing specific to phase-shifting transformers is provided. Keywords: advance phase angle, dual-core design, IEEE C57.135, main transformer, phase- shif

24、ting transformer, power transfer, retard phase angle, series transformer, single-core design, special tests IEEE is a registered trademark in the U.S. Patent & Trademark Office, owned by the Institute of Electrical and Electronics Engineers, Incorporated. IEC 62032:2012 IEEE Std C57.135-2011 vii Pub

25、lished by IEC under license from IEEE. 2011 IEEE. All rights reserved. IEEE Introduction This introduction is not part of IEEE Std C57.135-2011, IEEE Guide for the Application, Specification, and Testing of Phase-Shifting Transformers. This guide describes the application, specification, and testing

26、 of phase-shifting transformers. It is intended for the following: Organizations responsible for the application and specification of phase-shifting transformers for electric transmission systems to control power flow. Organizations responsible for testing phase-shifting transformers. This guide is

27、designed to help organizations: Understand the various types of phase-shifting transformers and how to apply them to obtain required control of power flow. Prepare specifications for the purchase of phase-shifting transformers. Standardize tests and test methods for phase-shifting transformers. This

28、 guide is intended to satisfy the following objectives: Promote consistency within organizations for the application and specification of phase-shifting transformers. Provide an understanding of the terminology, types, construction, and testing relating specifically to phase-shifting transformers. P

29、romote the standardization of testing procedures for phase-shifting transformers. Since this guide was first published in 2001, several recommendations from users and manufacturers were made to revise it to improve accuracy and applicability. Some of the revisions are as follows: Figure 1, Figure 3,

30、 Figure 4, Figure 7, and Figure 11 were improved. Equation (1) was divided into two parts to show the difference between advance and retard operations. A new section on minimum information requirements for specifying a PST was inserted. Various editorial changes were made to clarify the contents of

31、the guide. Notice to users Laws and regulations Users of these documents should consult all applicable laws and regulations. Compliance with the provisions of this standard does not imply compliance to any applicable regulatory requirements. Implementers of the standard are responsible for observing

32、 or referring to the applicable regulatory requirements. IEEE does not, by the publication of its standards, intend to urge action that is not in compliance with applicable laws, and these documents may not be construed as doing so. IEC 62032:2012 viii IEEE Std C57.135-2011 Published by IEC under li

33、cense from IEEE. 2011 IEEE. All rights reserved. Copyrights This document is copyrighted by the IEEE. It is made available for a wide variety of both public and private uses. These include both use, by reference, in laws and regulations, and use in private self- regulation, standardization, and the

34、promotion of engineering practices and methods. By making this document available for use and adoption by public authorities and private users, the IEEE does not waive any rights in copyright to this document. Updating of IEEE documents Users of IEEE standards should be aware that these documents ma

35、y be superseded at any time by the issuance of new editions or may be amended from time to time through the issuance of amendments, corrigenda, or errata. An official IEEE document at any point in time consists of the current edition of the document together with any amendments, corrigenda, or errat

36、a then in effect. In order to determine whether a given document is the current edition and whether it has been amended through the issuance of amendments, corrigenda, or errata, visit the IEEE Standards Association web site at http:/ieeexplore.ieee.org/xpl/standards.jsp, or contact the IEEE at the

37、address listed previously. For more information about the IEEE Standards Association or the IEEE standards development process, visit the IEEE-SA web site at http:/standards.ieee.org. Errata Errata, if any, for this and all other standards can be accessed at the following URL: http:/standards.ieee.o

38、rg/reading/ieee/updates/errata/index.html. Users are encouraged to check this URL for errata periodically. Interpretations Current interpretations can be accessed at the following URL: http:/standards.ieee.org/reading/ieee/interp/ index.html. Patents Attention is called to the possibility that imple

39、mentation of this guide may require use of subject matter covered by patent rights. By publication of this guide, no position is taken with respect to the existence or validity of any patent rights in connection therewith. The IEEE is not responsible for identifying Essential Patent Claims for which

40、 a license may be required, for conducting inquiries into the legal validity or scope of Patents Claims or determining whether any licensing terms or conditions provided in connection with submission of a Letter of Assurance, if any, or in any licensing agreements are reasonable or non- discriminatory. Users of this guide are expressly advised that determination of the validity of any patent rights, and the risk of infringement of such rights, is entirely their own responsibility. Further information may be obtained from the IEEE Standards Association.