1、 IEC 62047-10 Edition 1.0 2011-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Semiconductor devices Micro-electromechanical devices Part 10: Micro-pillar compression test for MEMS materials Dispositifs semiconducteur Dispositifs microlectromcaniques Partie 10: Essai de compression utilisant la techn
2、ique des micro-piliers pour les matriaux des MEMS IEC 62047-10:2011 colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2011 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, el
3、ectronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, pleas
4、e contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique,
5、y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le
6、 Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International St
7、andards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publ
8、ications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on al
9、l new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and
10、 French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Cen
11、tre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux te
12、chnologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fu
13、t-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez i
14、nform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de
15、20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires s
16、ur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62047-10 Edition 1.0 2011-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Semiconductor devices Micro-electromechanical devices Par
17、t 10: Micro-pillar compression test for MEMS materials Dispositifs semiconducteur Dispositifs microlectromcaniques Partie 10: Essai de compression utilisant la technique des micro-piliers pour les matriaux des MEMS INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE
18、L ICS 31.080.99 PRICE CODE CODE PRIX ISBN 978-2-88912-606-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale colour inside 2 62047-10 IEC:2011 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Symbols and
19、 designations 5 4 Test piece 6 4.1 General . 6 4.2 Shape of test piece . 6 4.3 Measurement of dimensions 6 5 Testing method and test apparatus . 7 5.1 Test principle 7 5.2 Test machine . 7 5.3 Test procedure 8 5.4 Test environment. 8 6 Test report 8 Annex A (informative) Error estimation using finit
20、e element method . 10 Bibliography 11 Figure 1 Shape of cylindrical pillar (See Table 1 for symbols) 5 Figure 2 Schematic of Micro-pillar compression test 7 Figure A.1 Error estimation with the aspect ratio and friction coefficient in the elastic modulus measurement 10 Table 1 Symbols and designatio
21、ns of test piece . 6 62047-10 IEC:2011 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SEMICONDUCTOR DEVICES MICRO-ELECTROMECHANICAL DEVICES Part 10: Micro-pillar compression test for MEMS materials FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standar
22、dization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes Inter
23、national Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate
24、 in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between
25、the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications h
26、ave the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any mi
27、sinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding nat
28、ional or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services
29、 carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC Nationa
30、l Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is d
31、rawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall n
32、ot be held responsible for identifying any or all such patent rights. International Standard IEC 62047-10 has been prepared by subcommittee 47F: Micro- electromechanical systems, of IEC technical committee 47: Semiconductor devices. The text of this standard is based on the following documents: FDIS
33、 Report on voting 47F/85/FDIS 47F/94/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of IEC 62047, under th
34、e general title Semiconductor devices Micro- electromechanical devices, can be found on the IEC website. 4 62047-10 IEC:2011 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in t
35、he data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The “colour inside” logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the
36、correct understanding of its contents. Users should therefore print this publication using a colour printer. 62047-10 IEC:2011 5 SEMICONDUCTOR DEVICES MICRO-ELECTROMECHANICAL DEVICES Part 10: Micro-pillar compression test for MEMS materials 1 Scope This part of IEC 62047 specifies micro-pillar compr
37、ession test method to measure compressive properties of MEMS materials with high accuracy, repeatability, and moderate effort of specimen fabrication. The uniaxial compressive stress-strain relationship of a specimen is measured, and the compressive modulus of elasticity and yield strength can be ob
38、tained. The test piece is a cylindrical pillar fabricated on a rigid (or highly stiff) substrate by micro- machining technologies, and its aspect ratio (ratio of pillar diameter to pillar height) should be more than 3. This standard is applicable to metallic, ceramic, and polymeric materials. 2 Norm
39、ative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62047-8, Semiconductor devic
40、es Micro-electromechanical devices Part 8: Strip bending test method for tensile property measurement of thin films 3 Symbols and designations For the purposes of this document, the shape of test piece and symbols are given in Figure 1 and Table 1, respectively. Test piece in this standard is often
41、referred to as a pillar specimen. Cylindrical pillar Substrate D H IEC 1708/11 Key Components Dimensions of cylindrical pillar cylindrical pillar: a part of micro-pillars fabricated on a substrate using micro-machining process shaped in a cylinder as a test piece D: diameter of a test piece substrat
42、e: a kind of rigid (or highly stiff) material supporting the test piece H: height of a test piece Figure 1 Shape of cylindrical pillar (See Table 1 for symbols) 6 62047-10 IEC:2011 Table 1 Symbols and designations of test piece Symbol Unit Designation H m height of a test piece D m diameter of a tes
43、t piece 4 Test piece 4.1 General The test piece shall be prepared by using the same fabrication process as the actual device fabrication. To minimize the size effect of a test piece, the structure and size of the test piece should be similar to those of the device components. There are many fabricat
44、ion methods of the test piece depending on the applications. 4.2 Shape of test piece This standard specifies the compressive properties of a cylindrical micro-pillar. The micro- pillars are fabricated on a substrate using micro-machining process. The shape and the verticality of the pillars should b
45、e checked using electron or optical microscopy. The boundary condition on the bottom surface of the pillar is usually regarded as the fixed boundary, and these boundary conditions are different from those of bulk scale pillars where the top and bottom surfaces are usually lubricated and regarded as
46、the frictionless boundary. Since it is also difficult to directly measure the compressive strain of the micro-pillar during the test, the strain is estimated from the displacement of the rigid punch using the Equation (2) of 5.1. This leads to errors in strain, and consequently errors in elastic mod
47、ulus and yield strength as described in Annex A. The accuracy of this method depends on the friction coefficient between the punch and the top surface, and the aspect ratio of the micro-pillar. The pillar with high aspect ratio is desirable for reducing the errors in strain estimation unless the buc
48、kling occurs. The upper limit of aspect ratio is dependent on boundary conditions and material properties of the pillar. The maximum aspect ratio is suggested as 10 4 1 . When there is no buckling after test for a pillar with an aspect ratio larger than 10, the test data should be considered as a va
49、lid one. The friction coefficient on the top surface can be reduced by applying a lubricating layer for bulk pillars (see 4), but it is very difficult to apply the lubricating layer to micro-pillars. The maximum variation in diameter of a cross-section of a pillar should be less than 1 % of the nominal diameter. When this is not the case, the actual cross-sectional area should be measured. 4.3 M
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1