IEC 62134-1-2009 Fibre optic interconnecting devices and passive components - Fibre optic closures - Part 1 Generic specification《光纤互连器件和无源元件.光纤闭包.第1部分 总规范》.pdf

1、 IEC 62134-1Edition 2.0 2009-06INTERNATIONAL STANDARD NORME INTERNATIONALEFibre optic interconnecting devices and passive components Fibre optic closures Part 1: Generic specification Dispositifs dinterconnexion et composants passifs fibres optiques Botiers fibres optiques Partie 1: Spcification gnr

2、ique IEC62134-1:2009 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2009 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm,

3、 without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National

4、 Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit

5、de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Cent

6、ral Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologi

7、es. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enab

8、les you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month

9、all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also

10、known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If you wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 1

11、1 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le conte

12、nu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectue

13、r des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Publishe

14、d dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi q

15、ue les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en ligne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez l

16、e FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62134-1Edition 2.0 2009-06INTERNATIONAL STANDARD NORME INTERNATIONALEFibre optic interconnecting devices and passive components Fibre optic closures Part 1: Generic specification Dispositifs

17、dinterconnexion et composants passifs fibres optiques Botiers fibres optiques Partie 1: Spcification gnrique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE SICS 33.180.99 PRICE CODECODE PRIXISBN 2-8318-1050-8 Registered trademark of the International Electrotech

18、nical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62134-1 IEC:2009 CONTENTS FOREWORD.4 INTRODUCTION.6 1 Scope.7 2 Normative references .7 3 Terms and definitions .8 4 Requirements .10 4.1 Classification.10 4.1.1 General .10 4.1.2 Type10 4.1.3 Style11 4.1.4 Variant 11 4

19、1.5 Arrangement12 4.1.6 Normative reference extensions 12 4.1.7 Environmental category Service categories 13 4.2 Documentation 13 4.2.1 Specification system13 4.2.2 Symbols 15 4.2.3 Drawings .15 4.2.4 Measurements.15 4.2.5 Tests .15 4.2.6 Test reports.16 4.2.7 Instructions for use16 4.3 Standardisa

20、tion system .16 4.3.1 Specification standards .16 4.3.2 Interface standards16 4.3.3 Performance standards16 4.3.4 Reliability standards 17 4.4 Design and construction 18 4.4.1 Materials .18 4.5 Workmanship 18 4.6 Quality 18 4.7 Performance19 4.8 Identification and marking .19 4.8.1 General .19 4.8.2

21、 Variant identification number .19 4.8.3 Component marking 19 4.8.4 Package marking.19 4.9 Storage conditions 19 4.10 Safety .19 Bibliography21 Figure 1 Standardisation system 18 62134-1 IEC:2009 3 Table 1 Operating service environments 13 Table 2 Multilevel IEC specification structure.14 4 62134-1

22、IEC:2009 INTERNATIONAL ELECTROTECHNICAL COMMISSION FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CLOSURES Part 1: Generic specification FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organisation for standardisation comprising all national ele

23、ctrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardisation in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specif

24、ications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. Internati

25、onal, governmental and nongovernmental organisations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organisation for Standardisation (ISO) in accordance with conditions determined by agreement between the two organisations. 2) The formal d

26、ecisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for in

27、ternational use and are accepted by IEC National Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications tran

28、sparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot b

29、e rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and member

30、s of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or

31、any other IEC Publications. 8) Attention is drawn to the normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may

32、 be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62134-1 has been prepared by subcommittee 86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. This s

33、econd edition cancels and replaces the first edition published in 2002. It constitutes a technical revision. The main changes with respect to the previous edition are listed below: addition and rewording of some terms and definitions; reconsideration of type, style and variant in the requirements; r

34、emoval of quality assessment procedures. 62134-1 IEC:2009 5 The text of this standard is based on the following documents: FDIS Report on voting 86B/2846/FDIS 86B/2885/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above tab

35、le. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the spec

36、ific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 6 62134-1 IEC:2009 INTRODUCTION Closures comprise a broad component family that functions to protect, secure and store passive fibre optic components (such as splices or connect

37、ors) or other non-interconnecting devices (such as optical branching devices). They are installed at either indoor or outdoor locations, and provide access to the optical path of one or more cabled optical fibres. They also generally provide a fibre management system for the orderly management, rout

38、ing, and storage of optical fibres. Configuration definitions may specify integrated functions, or permit grouped combinations of compatible independent sub-units. Specific classification requirements vary, and may or may not include isolation from environmental hazards (such as water ingress), stru

39、cture codes (such as fire safety), or other appropriate considerations. Closures are not intended to provide the primary packaging or structure for uncabled optical fibre splices (such as a rigid mechanical splice shell, or a fusion splice protection sleeve). Specification for those devices is defin

40、ed in IEC 61073-1. It is also intended that closures specified under this standard are not sufficiently characterized for continuous brine or deep-water submersion. Examples of this are oceanic or lake-crossing applications. Cables, closures and installation methods suited to this use are highly spe

41、cialised and are not within the scope of this standard or supporting test procedures. 62134-1 IEC:2009 7 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CLOSURES Part 1: Generic specification 1 Scope This part of IEC 62134 establishes uniform generic requirements for fibre opt

42、ic closures. This standard does not cover test and measurement procedures, which are described in IEC 61300 series. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated refe

43、rences, the latest edition of the referenced document (including any amendments) applies. IECQ 001002-3:2005, IEC Quality Assessment System for Electronic Components (IECQ) Rules of Procedure Part 3: Approval procedures IEC 60027 (all parts), Letter symbols to be used in electrical technology IEC 60

44、050(731), International Electrotechnical Vocabulary Chapter 731: Optical fibre communication IEC 60068 (all parts), Environmental testing IEC 60068-2-10, Environmental testing Part 2-10: Tests Test J and guidance: Mould growth IEC 60617 (all parts), Graphical symbols for diagrams IEC 60695 (all part

45、s), Fire hazard testing IEC 60695-1-1, Fire hazard testing Part 1-1: Guidance for assessing the fire hazard of electrotechnical products General guidelines IEC 60793-2, Optical fibres Part 2: Product specifications IEC 60794-2, Optical fibre cables Part 2: Indoor cables Sectional specification IEC 6

46、0825-1, Safety of laser products Part 1: Equipment classification and requirements IEC 61300-2 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2: Tests IEC 61300-3 (all parts), Fibre optic interconnecting devices and passive componen

47、ts Basic test and measurement procedures Part 3: Examinations and measurements 8 62134-1 IEC:2009 IEC 61753-1, Fibre optic interconnecting devices and passive components performance standard Part 1: General and guidance for performance standards IEC 61754 (all parts), Fibre optic connector interface

48、s IEC/TR 61930, Fibre optic graphical symbology IEC/TR 61931, Fibre optic Terminology IEC 62005 (all parts); Reliability of fibre optic interconnecting devices and passive optical components ISO 129-1, Technical drawings Indication of dimensions and tolerances Part 1: General principles ISO 286-1, I

49、SO system of limits and fits Part 1: Bases of tolerances, deviations and fits ISO 1101, Geometrical Product Specifications (GPS) Geometrical tolerancing Tolerances of form, orientation, location and run-out ISO 4892-3, Plastics Methods of exposure to laboratory light sources Part 3: Fluorescent UV lamps ISO 8601, Data elements and inter