IEC 62149-8-2014 Fibre optic active components and devices - Performance standard - Part 8 Seeded reflective semiconductor optical amplifier devices《纤维光学有源元件和器件 性能标准 第8部分 晶种反射半导体光放大器设备》.pdf

1、 IEC 62149-8 Edition 1.0 2014-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic active components and devices Performance standards Part 8: Seeded reflective semiconductor optical amplifier devices Composants et dispositifs actifs fibres optiques Normes de performances Partie 8: Dispositifs

2、 amplificateurs optiques semiconducteurs rflchissants rpartis IEC 62149-8:2014-04(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2014 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any me

3、ans, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication

4、, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mca

5、nique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez l

6、e Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares

7、and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been pu

8、blished. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications s

9、earch - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on

10、 all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English a

11、nd French, with equivalent terms in 14 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC

12、 publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centr

13、e: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique

14、 des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internatio

15、nales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, t

16、exte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et auss

17、i une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabula

18、ire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des

19、 publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62149-8 Edition 1.0 2014-04 INTERNATIONAL STANDARD NORME INTERNATIONALE Fibre optic a

20、ctive components and devices Performance standards Part 8: Seeded reflective semiconductor optical amplifier devices Composants et dispositifs actifs fibres optiques Normes de performances Partie 8: Dispositifs amplificateurs optiques semiconducteurs rflchissants rpartis INTERNATIONAL ELECTROTECHNIC

21、AL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE N ICS 33.180.20 PRICE CODE CODE PRIX ISBN 978-2-8322-1543-2 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publicati

22、on from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62149-8:2014 IEC 2014 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions, symbols and abbreviations . 7 3.1 Terms and

23、definitions 7 3.2 Symbols and abbreviations . 7 4 Product parameters . 8 4.1 Absolute limiting ratings 8 4.2 Operating environment 8 4.3 Functional specification. 8 5 Testing 8 5.1 General . 8 5.2 Characterization testing 8 5.3 Performance testing 9 6 Environmental specifications . 9 6.1 General saf

24、ety 9 6.2 Laser safety 9 6.3 Electromagnetic compatibility (EMC) requirements 9 Annex A (normative) Specifications for seeded RSOA devices . 10 A.1 Absolute limiting ratings 10 A.2 Operating environment 10 A.3 Functional specification. 10 A.4 Testing . 11 A.4.1 Characterization testing . 11 A.4.2 Pe

25、rformance testing. 11 Bibliography 14 Figure 1 Seeded DWDM transmission based on RSOA devices . 5 Table 1 Operating environment 8 Tableau A.1 Absolute limiting ratings . 10 Tableau A.2 Operating conditions for functional specification . 10 Tableau A.3 Functional specification 11 Tableau A.4 Performa

26、nce test plan 12 Tableau A.5 Recommended performance test failure criteria 13 IEC 62149-8:2014 IEC 2014 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 8: Seeded reflective semiconductor optical amplifier devices FOREWORD 1) The Inte

27、rnational Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and elec

28、tronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committe

29、es; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for S

30、tandardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee ha

31、s representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accura

32、te, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional

33、 publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in som

34、e areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents i

35、ncluding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or r

36、eliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of th

37、e elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62149-8 has been prepared by subcommittee 86C: Fibre optic systems and active devices, of IEC technical committee 86: Fi

38、bre optics. The text of this standard is based on the following documents: CDV Report on voting 86C/1144/CDV 86C/1221/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordanc

39、e with the ISO/IEC Directives, Part 2. 4 IEC 62149-8:2014 IEC 2014 A list of all parts in the IEC 62149 series, published under the general title Fibre optic active components and devices Performance standards, can be found on the IEC website. The committee has decided that the contents of this publ

40、ication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 62149-8:2014 IEC 2014 5 INT

41、RODUCTION Fibre optic laser devices are used to convert electrical signals into optical signals. This part of IEC 62149 covers the performance specification for seeded reflective semiconductor optical amplifier (RSOA) devices in fibre optic telecommunication and optical data transmission application

42、s.The optical performance criteria are generally well specified for a number of internationally agreed applications areas such as ITU-T Recommendation G.698.3. This standard aims to provide optical interface specifications towards the realization of transversely compatible seeded dense wavelength di

43、vision multiplexing (DWDM) systems. In the seeded DWDM system, seed light sources are used to generate broadband seed lights in C-band or L-band. After passing through DWDM DeMUXs in the link, the broadband seed lights are spectrum sliced according to the transmission characteristics of DWDM DeMUXs.

44、 Each spectrum sliced seed light is injected into a RSOA transmitter based on a RSOA device. Consequently, an output signal wavelength of a RSOA transmitter can be determined by a wavelength of an injected seed light. Figure 1 Seeded DWDM transmission based on RSOA devices Seeded RSOA devices for se

45、eded DWDM systems are supplied by different manufacturers, but do not guarantee operation of seeded RSOA devices. Manufacturers using the standards are responsible for meeting the required performance and/or reliability and quality assurance under a recognized scheme. IEC 1194/14 1 1 N N 1 1 N N 1 N

46、 1 N 6 IEC 62149-8:2014 IEC 2014 FIBRE OPTIC ACTIVE COMPONENTS AND DEVICES PERFORMANCE STANDARDS Part 8: Seeded reflective semiconductor optical amplifier devices 1 Scope This part of IEC 62149 covers the performance specification for seeded reflective semiconductor optical amplifier (RSOA) devices

47、used for fibre optic telecommunication and optical data transmission applications. The performance standard contains a definition of the product performance requirements together with a series of sets of tests and measurements with clearly defined conditions, severities, and pass/fail criteria. The

48、tests are intended to be run on a “once-off” basis to prove any products ability to satisfy the performance standards requirements. A product that has been shown to meet all the requirements of a performance standard can be declared as complying with the performance standard, but should then be cont

49、rolled by a quality assurance/quality conformance program. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC