IEC 62323-2005 Dimensions of half pot-cores made of ferrite for inductive proximity switches《电感接近开关用铁氧体半壶形磁芯的尺寸》.pdf

1、 IEC 62323 Edition 1.0 2005-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Dimensions of half pot-cores made of ferrite for inductive proximity switches Dimensions de demi-pots en ferrite pour des commutateurs inductifs de proximit IEC 62323:2005 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 200

2、5 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Com

3、mittee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf in

4、dication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous ave

5、z des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 C

6、H-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical co

7、ntent of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a va

8、riety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Availabl

9、e on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the Internationa

10、l Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI

11、) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous

12、possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne auss

13、i des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email.

14、Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique

15、International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62323 Edition 1.0 2005-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Dimensions of half pot-cores made o

16、f ferrite for inductive proximity switches Dimensions de demi-pots en ferrite pour des commutateurs inductifs de proximit INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE F ICS 29.100.10 PRICE CODE CODE PRIX ISBN 978-2-83220-768-0 Registered trademark of the Inter

17、national Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 62323 IEC:2005 I

18、NTERNATIONAL ELECTROTECHNICAL COMMISSION _ DIMENSIONS OF HALF POT-CORES MADE OF FERRITE FOR INDUCTIVE PROXIMITY SWITCHES FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National C

19、ommittees). The object of the IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards. Technical Specifications, Technical Reports, Publicl

20、y Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)“). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governme

21、ntal organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on t

22、echnical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted b

23、y IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international un

24、iformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter.

25、5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its direct

26、ors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising

27、out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is draw

28、n to the possibility that some of the elements of this IEC publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62323 has been prepared by IEC technical committee 51: Magnetic components and ferri

29、te materials. This standard cancels and replaces IEC/PAS 62323 published in 2002. This first edition constitutes a technical revision. This bilingual version (2013-05) corresponds to the monolingual English version, published in 2005-06. The text of this standard is based on the following documents:

30、 FDIS Report on voting 51/817/FDIS 51/825/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. 62323 IEC:2005 3 This publication has been drafted in accorda

31、nce with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication

32、will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 4 62323 IEC:2005 DIMENSIONS OF HALF POT-CORES MADE OF FERRITE FOR INDUCTIVE PROXIMITY SWITCHES 1 Scope This International Standard lays down the important dimensions for the mechanical interchangeability of a preferred half p

33、ot-core series of ferrite, intended to be used in inductive proximity switches. 2 Normative references The following referenced documents are indispensable for the applicatiuon of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the r

34、eferenced document (including any amendments) applies. IEC 60424-1:1999, Ferrite cores Guide on the limits of surface irregularities Part 1: General specification 3 Dimensions 3.1 Nomenclature of dimensions B D F E A H IEC 763/05 Figure 1 Nomenclature of dimensions 3.2 Dimensions and tolerances The

35、main dimensions and tolerances shall be as given in Table 1. 62323 IEC:2005 5 Table 1 Dimensions and tolerances Dimensions in millimetres Core type Dimensions A B D E F Dim. Tol. Dim. Tol. Dim. Tol. Dim. Tol. Dim. Tol. PS 3,3 3,3 x 1,3 3,35 0,15 1,3 0,2 0,85 +0,2 2,5 +0,1 1,20 0,1 PS 5,6 5,6 x 1,7 5

36、,6 0,25 1,7 0,2 1,1 +0,2 4,5 +0,15 2,5 0,1 PS 7,35 7,35 x 3,6 7,35 0,25 3,6 0,2 2,8 +0,2 5,8 +0,2 3,0 0,15 PS 9,0 9,0 x 3,5 9,0 0,4 3,5 0,2 2,6 +0,2 7,3 +0,3 3,9 0,25 PS 11 11,3 x 3,3 11,3 0,4 3,3 0,1 2,2 +0,15 9,0 +0,4 4,7 0,2 PS 14 14,3 x 4,25 14,3 0,5 4,25 0,15 2,8 +0,2 11,6 +0,4 6,0 0,2 PS 25 24

37、,8 x 8,9 24,8 1,0 8,9 0,2 5,9 +0,3 20,5 +0,8 11,3 0,5 PS 30,5 30,5 x 10,2 30,5 1,0 10,2 0,3 7,0 +0,35 25 +0,8 13,5 0,4 PS 35 35 x 10,8 35 1,0 10,8 0,35 7,2 +0,4 29,4 +0,8 15,7 0,5 PS 47 47 x 14 47 1,3 14 0,5 9,5 +0,5 39 +1,1 20 0,6 PS 68 68 x 14,5 68 2,2 14,5 0,6 9,0 +0,6 57,5 +1,8 29,5 1,0 NOTE 1 T

38、he core may have up to two slots in order to realize the wire connection feed-through holes. NOTE 2 A centre hole (H) is allowable. NOTE 3 Chamfers are allowable as long as they do not limit the winding space. 4 Requirements In order to avoid damage to the coils and their interconnection wires, the

39、cores shall be delivered without burrs. Flashes according to 3.3 of IEC 60424-1 shall not be present either on the winding area limiting surfaces including edges or on the wire connection feed-through holes. 5 Marking A manufacturer specific marking is mandatory from PS 7,35 and larger, preferably o

40、n the bottom of the core. 6 62323 IEC:2005 Bibliography The following literature gives additional information. IEC 60133:2000, Dimensions of pot-cores made of magnetic oxides and associated parts IEC 60424-2:1997, Guidance of the limits of surface irregularities of ferrite cores Part 2: RM-cores IEC

41、 61332:1995, Soft ferrite material classification IEC 62044-1:2002, Cores made of soft magnetic materials Measuring methods Part 1: Generic specification IEC 62044-2:2005, Cores made of soft magnetic materials Measuring methods Part 2: Magnetic properties at low excitation level IEC 62044-3:2000, Co

42、res made of soft magnetic materials Measuring methods Part 3: Magnetic properties at high excitation level _ 8 62323 CEI:2005 COMMISSION LECTROTECHNIQUE INTERNATIONALE _ DIMENSIONS DE DEMI-POTS EN FERRITE POUR DES COMMUTATEURS INDUCTIFS DE PROXIMIT AVANT-PROPOS 1) La Commission lectrotechnique Inter

43、nationale (CEI) est une organisation mondiale de normalisation compose de lensemble des comits lectrotechniques nationaux (Comits nationaux de la CEI). La CEI a pour objet de favoriser la coopration internationale pour toutes les questions de normalisation dans les domaines de llectricit et de llect

44、ronique. A cet effet, la CEI, entre autres activits, publie des Normes internationales. des Spcifications techniques, des Rapports techniques, des Spcifications accessibles au public (PAS) et des Guides (ci-aprs dnomms “Publication(s) de la CEI“). Leur laboration est confie des comits dtudes, aux tr

45、avaux desquels tout Comit national intress par le sujet trait peut participer. Les organisations internationales, gouvernementales et non gouvernementales, en liaison avec la CEI, participent galement aux travaux. La CEI collabore troitement avec lOrganisation Internationale de Normalisation (ISO),

46、selon des conditions fixes par accord entre les deux organisations. 2) Les dcisions ou accords officiels de la CEI concernant les questions techniques reprsentent, dans la mesure du possible, un accord international sur les sujets tudis, tant donn que les Comits nationaux intresss sont reprsents dan

47、s chaque comit dtudes. 3) Les publications CEI se prsentent sous la forme de recommandations internationales et elles sont agres comme telles par les Comits nationaux de la CEI. Tous les efforts raisonnables sont entrepris afin que la CEI sassure de lexactitude du contenu technique de ses publicatio

48、ns; la CEI ne peut pas tre tenue responsable de lventuelle mauvaise utilisation ou interprtation qui en est faite par un quelconque utilisateur final. 4) Dans le but dencourager luniformit internationale, les Comits nationaux de la CEI sengagent, dans toute la mesure possible, appliquer de faon tran

49、sparente les Publications de la CEI dans leurs publications nationales et rgionales. Toutes divergences entre toutes Publications de la CEI et toutes publications nationales ou rgionales correspondantes doivent tre indiques en termes clairs dans ces dernires. 5) La CEI na prvu aucune procdure de marquage valant in