1、 IEC 62337 Edition 2.0 2012-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Commissioning of electrical, instrumentation and control systems in the process industry Specific phases and milestones Mise en service des systmes lectriques, de mesure et de commande dans lindustrie de transformation Phases
2、 et jalons spcifiques IEC62337:2012 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2012 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying
3、 and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC
4、member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, san
5、s laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsi
6、dence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all
7、 electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications searc
8、h - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on
9、 all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English
10、and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service
11、 Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu t
12、echnique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI
13、 en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les
14、nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes
15、quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62337 Edition 2.
16、0 2012-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Commissioning of electrical, instrumentation and control systems in the process industry Specific phases and milestones Mise en service des systmes lectriques, de mesure et de commande dans lindustrie de transformation Phases et jalons spcifiques
17、 INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE W ICS 25.040.40; 91.010; 91.040; 91.140 PRICE CODE CODE PRIX ISBN 978-2-88912-913-3 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique International
18、e Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 62337 IEC:2012 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definiti
19、on . 7 4 General preparations before acceptance of plant 10 5 Completion of erection 10 5.1 Mechanical checks and tests . 10 5.2 Procedure . 11 6 Precommissioning (mechanical completion) . 11 6.1 General . 11 6.2 Procedure . 11 7 Commissioning . 12 7.1 General . 12 7.2 Procedure . 12 7.3 Execution o
20、f performance test . 13 7.4 Evaluation and report of performance test . 14 8 Performance test and acceptance of plant 15 8.1 General . 15 8.2 Conditions for commencement of performance test . 15 8.3 Execution of performance test . 16 8.4 Evaluation and report of performance test . 16 Annex A (inform
21、ative) List of documents to be used for the precommissioning and commissioning phase 18 Annex B (informative) Description of precommissioning activities 20 Annex C (informative) Mechanical completion certificate 31 Annex D (informative) Description of commissioning activities . 32 Annex E (informati
22、ve) Acceptance of plant certificate. 34 Annex F (informative) Project-specific items 35 Bibliography 36 Figure 1 Definition of phases and milestones . 6 Table B.1 General procedures . 20 Table B.2 Specific procedures . 24 Table D.1 Activities to be performed during the commissioning stage 32 Table F
23、.1 Project-specific items to be discussed and agreed upon . 35 62337 IEC:2012 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ COMMISSIONING OF ELECTRICAL, INSTRUMENTATION AND CONTROL SYSTEMS IN THE PROCESS INDUSTRY SPECIFIC PHASES AND MILESTONES FOREWORD 1) The International Electrotechnical Commissio
24、n (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in ad
25、dition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee inter
26、ested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance wi
27、th conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested
28、IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible fo
29、r the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between
30、 any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of confo
31、rmity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and membe
32、rs of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or
33、 any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication ma
34、y be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62337 has been prepared by subcommittee 65E: Devices and integration in enterprise systems of IEC technical committee 65: Industrial-process measurement, con
35、trol and automation. This second edition cancels and replaces the first edition published in 2006. This edition constitutes a technical revision. The main changes with respect to the previous edition are listed below: The definition of the documents mentioned in this standard is in accordance with f
36、uture IEC 627081. _ 1To be published. 4 62337 IEC:2012 The text of this standard is based on the following documents: FDIS Report on voting 65E/221/FDIS 65E/226/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. Thi
37、s publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication
38、. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 62337 IEC:2012 5 INTRODUCTION There is an increasing trend in the process industry to award the construction of whole plants to contractors on a lump-sum turnkey or similar commercial basis. Ex
39、perience has shown that both the process industry (hereinafter called “the owner”) and the contractor have long and expensive discussions to lay down unambiguously the scope of activities to be taken by the contractor and the owner and their responsibilities to achieve the handover of the plant. Thi
40、s standard is intended to lead to an improvement and acceleration of the negotiation phase and to a mutual understanding about the scope of the activities of each party. 6 62337 IEC:2012 COMMISSIONING OF ELECTRICAL, INSTRUMENTATION AND CONTROL SYSTEMS IN THE PROCESS INDUSTRY SPECIFIC PHASES AND MILE
41、STONES 1 Scope This International Standard defines specific phases and milestones (see Figure 1) in the commissioning of electrical, instrumentation and control systems in the process industry. By way of example, it describes activities following the “completion-of-erection” milestone of the project
42、 and prior to the “acceptance-of-the-plant” phase by the owner. Such activities need to be adapted for each type of process/plant concerned. NOTE This standard assumes that the “acceptance-of-the-plant” milestone will occur after the performance test. If there is a reduced scope, this document shoul
43、d be adapted accordingly. Acceptance of plant PHASES Construction Precommissioning Commissioning Production Cold Hot MILESTONES Completion of erection Mechanical completion Start-up Start of production Performance test NOTE Construction and precommissioning activities could be overlapping. Figure 1
44、Definition of phases and milestones For application in the pharmaceutical or other highly specialized industries, additional guidelines (for example, Good Automated Manufacturing Practice (GAMP), definitions and stipulations should apply in accordance with existing standards, for example, for GMP Co
45、mpliance 21 CFR (FDA) and the Standard Operating Procedure of the European Medicines Agency (SOP/INSP/2003). 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edit
46、ion cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62079, Preparation of instruction Structuring, content and presentation IEC 62424, Representation of process control engineering Requests in P b) the equipment is installe
47、d and mechanically functions in accordance with the general design requirements; c) applicable codes, as listed in the general design requirements, are followed for materials and workmanship. Items such as painting, thermal insulation and final clean-up which would not affect the operation or safety
48、 of the plant could be excluded. All these items shall be listed and 62337 IEC:2012 11 completed after precommissioning or commissioning within a mutually agreed schedule between the contractor and the owner but before the acceptance of the plant. 5.2 Procedure The following shall apply: a) The cont
49、ractor shall prepare and maintain on-site test reports and records which shall include the following information: description of the type of test or check; date and time of test or check; identification of equipment and facilities; test pressure if applicable, test data and results, including remarks, if any; signature of the owners personnel witnessing the data recorded, if required. b) C
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1