IEC 62341-2-1-2015 Organic light emitting diode (OLED) displays - Part 2-1 Essential ratings and characteristics of OLED display modules《有机发光二极管 (OLED) 显示器 第2-1部分 OLED显示模块的基本额定值和特性》.pdf

1、 IEC 62341-2-1 Edition 1.0 2015-05 INTERNATIONAL STANDARD Organic light emitting diode (OLED) displays Part 2-1: Essential ratings and characteristics of OLED display modules IEC 62341-2-1:2015-05(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved

2、. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you

3、 have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-

4、1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical cont

5、ent of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on

6、IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, tech

7、nical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electr

8、opedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. I

9、EC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer

10、 Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62341-2-1 Edition 1.0 2015-05 INTERNATIONAL STANDARD Organic light emitting diode (OLED) displays Part 2-1: Essential

11、ratings and characteristics of OLED display modules INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 31.260 ISBN 978-2-8322-2697-1 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 62341-2-1:

12、2015 IEC 2015 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Organic light emitting diode (OLED) display modules. 6 3.1 Types of OLED display modules . 6 3.2 Principles and structure 6 3.3 Modes of operation . 6 3.3.1 Addressing mode of operation . 6 3.3.2 Optical mode o

13、f operation 6 3.4 Details of outline . 7 3.4.1 Material and mechanical description 7 3.4.2 Connection types . 7 3.4.3 Outline drawing and dimensions 7 3.5 Limiting values (absolute maximum rating system) over the operating temperature range, unless otherwise stated 7 3.6 Electrical and optical chara

14、cteristics . 7 3.7 Supplementary information . 9 Table 1 Limiting values of OLED modules 7 Table 2 Electrical and optical characteristics of OLED modules . 8 IEC 62341-2-1:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS Part 2-1: Essential rat

15、ings and characteristics of OLED display modules FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation o

16、n all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC P

17、ublication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparatio

18、n. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus

19、of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are ma

20、de to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transp

21、arently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent ce

22、rtification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability

23、shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including

24、legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this

25、publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62341-2-1 has been prepared by technical committee

26、110: Electronic display devices. The text of this standard is based on the following documents: FDIS Report on voting 110/651/FDIS 110/666/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been

27、 drafted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 62341-2-1:2015 IEC 2015 A list of all parts in the IEC 62341 series, published under the general title Organic light emitting diode (OLED) displays, can be found on the IEC website. The committee has decided that the contents of this

28、publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this

29、 publication may be issued at a later date. IEC 62341-2-1:2015 IEC 2015 5 INTRODUCTION IEC 62341 consists of the following parts, under the general title Organic light emitting diode (OLED) displays: Part 1-1: Generic specifications Part 1-2: Terminology and letter symbols Part 2-1: Essential rating

30、s and characteristics of OLED display modules Part 5: Environmental testing methods Part 5-2: Mechanical endurance testing methods Part 5-3: Measuring methods of image sticking and lifetime Part 6-1: Measuring methods of optical and electro-optical parameters Part 6-2: Measuring methods of visual qu

31、ality and ambient performance Part 6-3: Measuring methods of image quality 6 IEC 62341-2-1:2015 IEC 2015 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS Part 2-1: Essential ratings and characteristics of OLED display modules 1 Scope This part of IEC 62341 describes the essential ratings and characteris

32、tics of organic light emitting diode (OLED) display modules. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the l

33、atest edition of the referenced document (including any amendments) applies. Void. 3 Organic light emitting diode (OLED) display modules 3.1 Types of OLED display modules The OLED display modules include the following types: passive matrix monochrome OLED display modules, passive matrix colour OLED

34、display modules, active matrix colour OLED display modules. 3.2 Principles and structure The OLED display modules consist of OLED display panels, electronic circuits, and usually bezels. EXAMPLE A thin film transistor (TFT) (polycrystalline silicon, oxide, organic materials) active matrix display ce

35、ll with electronic circuits and connector pins. 3.3 Modes of operation 3.3.1 Addressing mode of operation The addressing mode of operation for OLED display modules includes the following types: passive matrix, active matrix, etc. 3.3.2 Optical mode of operation The addressing mode of operation for O

36、LED display modules includes the following types: illumination mode: for example top-emission, bottom-emission, number of colours, number of grey scales. IEC 62341-2-1:2015 IEC 2015 7 3.4 Details of outline 3.4.1 Material and mechanical description The material and mechanical description of OLED dis

37、play modules is as follows: substrate material: for examples glass, plastic, etc., bezel material: for example plastic, metal, etc. 3.4.2 Connection types The connection types of OLED display modules are as follows: connector, flex cable, connection pins, etc. 3.4.3 Outline drawing and dimensions Th

38、e outline drawing and dimensions of OLED display modules are as follows: overall dimensions, bezel dimensions, active display area and display centre. 3.5 Limiting values (absolute maximum rating system) over the operating temperature range, unless otherwise stated The following limiting values shou

39、ld be specified in Table 1. Table 1 Limiting values of OLED modules Subclause Characteristics Symbol Requirements Unit 3.5.1 Operating temperature T opMin. Max. C 3.5.2 Operating humidity H opMax. % 3.5.3 Storage temperature T stgMin. Max. C 3.5.4 Storage humidity H stgMax. % 3.5.5 Supplied voltages

40、 Supply voltage for logic drive V DD V SSMin. Max. V Supply voltage(s) for EL V ELMin. Max. 3.5.6 Input signal voltages V INMin. Max. V 3.6 Electrical and optical characteristics The following characteristics should be specified in Table 2. 8 IEC 62341-2-1:2015 IEC 2015 Table 2 Electrical and optica

41、l characteristics of OLED modules Subclause Characteristics Condition at Top = 25 C unless otherwise specified Symbol Requirements Unit 3.6.1 Supplied voltages Supply voltage for logic drive V DD V SSMin. Max. V Supply voltage(s) for EL V ELMin. Max. 3.6.2 Input signal voltages V INMin. Max. High le

42、vel input signal voltage V INHMin. Max. Low level input signal voltage V INLMin. Max. V Input analogue video signals (where appropriate) V VIDMin. Max. 3.6.3 Operating frequency (where appropriate) f opMin. Max. Hz Frame frequency f FRM3.6.4 Supply currents Conditions chosen to achieve maximum suppl

43、y current, e.g. operating supply voltage, display pattern, etc. as appropriate I tot or I DDand/or I EEMax. mA 3.6.5 High level input signal current (where appropriate) I INHMax. mA 3.6.6 Low level input signal current (where appropriate) I INLMax. mA 3.6.7 Dark-room contrast ratio Specified measuri

44、ng method and conditions DRCR Min. 3.6.8 Ambient contrast ratio Specified measuring method and conditions ACR Min. 3.6.9 Luminance (where appropriate) Specified measuring method and conditions L Min. cd/m 2 Luminance uniformity (where appropriate) L uniMin. Color uniformity (where appropriate) uv .

45、Max. 3.6.10 Viewing angle range Specified definition of viewing direction and specified contrast ratio Vand HMin. Max. 3.6.11 Half luminance lifetime Specified measuring method and conditions T 50Min. h 3.6.12 Power consumption Specified measuring method and conditions P Max. W 3.6.13 Reflectance (w

46、here appropriate) Specified measuring method and conditions Max. 3.6.14 Chromaticity of white (x,y) (where appropriate) x w,y wa a Chromaticity of red (x,y) (where appropriate) x R, y Ra a Chromaticity of blue (x,y) (where appropriate) x B, y Ba a Chromaticity of green (x,y) (where appropriate) x G,

47、 y Ga a 3.6.15 Image sticking (where appropriate) Specified measuring method and conditions IS Max. aItems of value (i.e., minimum, maximum, typical or average) are determined in a detail specification. IEC 62341-2-1:2015 IEC 2015 9 3.7 Supplementary information 3.7.1 Timing characteristics, timing

48、of logic voltages and data/format interface specification. 3.7.2 Supply voltages sequence condition, where appropriate. 3.7.3 Operating voltage range, if appropriate, as a function of temperature at specified contrast ratio. 3.7.4 Handing and operating information. 3.7.5 Precautions with respect to

49、electrostatic discharges. 3.7.6 Precautions of installation: mechanical and/or electrical. 3.7.7 Safety information. 3.7.8 Characterization of diffuse and specular reflectance and transmittance. _ INTERNATIONAL ELECTROTECHNICAL COMMISSION 3, rue de Varemb PO Box 131 CH-1211 Geneva 20 Switzerland Tel: + 41 22 919 02 11 Fax: + 41 22 919 03 00 infoiec.ch www.iec.ch