1、 IEC 62341-6-4 Edition 1.0 2017-05 INTERNATIONAL STANDARD Organic light emitting diode (OLED) displays Part 6-4: Measuring methods of transparent properties IEC 62341-6-4:2017-05(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Un
2、less otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you hav
3、e any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211
4、 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content
5、of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC
6、International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technica
7、l committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electroped
8、ia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary -
9、std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - websto
10、re.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62341-6-4 Edition 1.0 2017-05 INTERNATIONAL STANDARD Organic light emitting diode (OLED) displays Part 6-4: Measuring methods of transparent p
11、roperties INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 31.260 ISBN 978-2-8322-4297-1 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 62341-6-4:2017 IEC 2017 CONTENTS FOREW
12、ORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Measuring conditions . 7 4.1 Standard measuring environmental conditions 7 4.2 Standard lighting conditions 7 4.2.1 Darkroom conditions 7 4.2.2 Ambient illumination conditions 7 4.2.3 Ambient illumination spectra 8 4.3 Standard s
13、etup conditions . 8 4.3.1 Starting conditions of measurements . 8 4.3.2 Conditions of measuring equipment . 9 5 Measuring methods of transparent properties 10 5.1 Measuring methods of transmission performance 10 5.1.1 Hemispherical transmittance factor with specular included . 10 5.1.2 Transmitted h
14、aze under hemispherical illumination 12 5.1.3 Directional transmittance factor . 14 5.1.4 Measurement method of purity . 16 5.1.5 Colour variation caused by a transparent display . 19 5.2 Measuring methods of on-screen performance in a darkroom 20 5.2.1 Luminance and its uniformity . 20 5.2.2 Chroma
15、ticity and colour non-uniformity 23 5.2.3 Darkroom contrast ratio . 24 5.2.4 Grey scale and gamma characteristics 25 5.2.5 Colour gamut . 27 5.2.6 Directional optical characteristics 29 6 Measuring methods of reflection properties . 30 6.1 Hemispherical reflectance factor with specular included 30 6
16、.1.1 Purpose . 30 6.1.2 Measuring conditions . 30 6.1.3 Measuring method . 30 6.2 Directional reflectance factor 31 6.2.1 Purpose . 31 6.2.2 Measuring conditions . 31 6.2.3 Measuring method . 31 7 Optical on-screen performance under ambient illumination 31 7.1 Ambient contrast ratio . 31 7.1.1 Purpo
17、se . 31 7.1.2 Measuring conditions . 32 7.1.3 Measuring method . 32 7.2 Display ambient colour measurement 33 7.2.1 Purpose . 33 7.2.2 Measuring conditions . 33 7.2.3 Measuring method . 34 IEC 62341-6-4:2017 IEC 2017 3 Annex A (normative) Alternative method for measuring the hemispherical transmitta
18、nce factor of a transparent OLED display 36 A.1 Purpose 36 A.2 Measuring conditions 36 A.3 Measuring the transmittance . 36 Bibliography 39 Figure 1 Layout diagram of measurement setup . 9 Figure 2 Side view of measuring concept for the hemispherical transmittance factor measurement with specular in
19、cluded or excluded . 12 Figure 3 Schematic arrangement of haze measurement . 14 Figure 4 Side view of measuring concept for the hemispherical transmittance factor measurement with specular included or excluded . 16 Figure 5 Measuring configuration for purity measurement 18 Figure 6 Test patterns for
20、 purity measurement . 18 Figure 7 Test pattern for 4 % window luminance 21 Figure 8 Example of luminance loading measurement 22 Figure 9 Measurement locations 23 Figure 10 Measuring patterns for gamma measurement . 26 Figure A.1 Measurement geometry using a sampling sphere 37 Table 1 Standard ambien
21、t conditions . 8 Table 2 Measuring conditions of the ports . 14 Table 3 Measured example for purity . 19 Table 4 Working example for colour variation index . 20 Table 5 Worked example for luminance loading . 22 Table 6 Example of luminance non-uniformity 23 Table 7 Example of colour uniformity measu
22、rement . 24 Table 8 Example of gamma measurement 26 Table 9 Reference areas for the colour reproduction range 28 Table 10 Example of measurement for the colour gamut variation ratio . 28 Table 11 Example of measurement for the directional electro-optical characteristic 30 4 IEC 62341-6-4:2017 IEC 20
23、17 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS Part 6-4: Measuring methods of transparent properties FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical c
24、ommittees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Techn
25、ical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmen
26、tal and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or a
27、greements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international u
28、se and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to pro
29、mote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indi
30、cated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6
31、) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property dama
32、ge or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publ
33、ication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all s
34、uch patent rights. International Standard IEC 62341-6-4 has been prepared by IEC technical committee 110: Electronic display devices. The text of this International Standard is based on the following documents: FDIS Report on voting 110/843/FDIS 110/866/RVD Full information on the voting for the app
35、roval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62341 series, published under the general title Organic light emitting diode (OLED)
36、 displays, can be found on the IEC website. IEC 62341-6-4:2017 IEC 2017 5 The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date,
37、 the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful
38、for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 IEC 62341-6-4:2017 IEC 2017 ORGANIC LIGHT EMITTING DIODE (OLED) DISPLAYS Part 6-4: Measuring methods of transparent properties 1 Scope This part of IEC 62341 specifies the standard mea
39、surement conditions and measuring methods for determining the optical performance of transparent properties of organic light emitting diode (OLED) display panels and modules. This document includes the display performance under darkroom conditions, and front and back illumination. 2 Normative refere
40、nces The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) a
41、pplies. IEC 62341-1-2, Organic light emitting diode (OLED) displays Part 1-2: Terminology and letter symbols IEC 62341-6-1, Organic light emitting diode (OLED) displays Part 6-1: Measuring methods of optical and electro-optical parameters IEC 62341-6-2, Organic light emitting diode (OLED) displays P
42、art 6-2: Measuring methods of visual quality and ambient performance ISO 9241-307, Ergonomics of human-system interaction Part 307: Analysis and compliance test methods for electronic visual displays ISO 11664-2, Colorimetry Part 2: CIE standard illuminants CIE 15-2004, Colorimetry 3 Terms and defin
43、itions For the purposes of this document, the terms and definitions given in IEC 62341-1-2 and the following apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing plat
44、form: available at http:/www.iso.org/obp 3.1 transmittance factor ratio of the radiant or luminous flux transmitted in the direction delimited by the given solid angle cone to that transmitted in the same direction and solid angle cone by a perfect transmitting diffuser identically irradiated or ill
45、uminated Note 1 to entry: When the term transmittance factor is used in this document, it refers to the photopically- weighted luminous flux. IEC 62341-6-4:2017 IEC 2017 7 3.2 spectral transmittance factor ratio of the spectral radiant flux transmitted in the direction delimited by the given solid a
46、ngle cone to that transmitted in the same direction by a perfect transmitting diffuser identically irradiated 3.3 transmitted haze percentage of transmitted luminance, passing through a specimen, which deviates from the incident light by no more than 0,044 rad (2,5) by forward scattering 3.4 purity
47、ratio of the luminance measured in the 0,2 region to the luminance of the total transmitted light Note 1 to entry: The purity is defined as how clearly the see-through image could be seen. The purity is derived from the measurement of distorted light due to diffraction or refraction. 3.5 on-screen p
48、erformance optical performance that can be measured on the transparent screen when viewing an image on the screen 4 Measuring conditions 4.1 Standard measuring environmental conditions Measurements shall be carried out under the standard environmental conditions: Temperature: 25 C 3 C Relative humid
49、ity: 25 % RH to 85 % RH Atmospheric pressure: 86 kPa to 106 kPa When different environmental conditions are used, they shall be noted in the measurement report. 4.2 Standard lighting conditions 4.2.1 Darkroom conditions The luminance contribution from the background illumination reflected off and/or transmitted through the test display shall be less than 0,01 cd/m 2or 1/20 of the displays black state luminance, whichever is lower. If these conditio
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1