1、 IEC 62375 Edition 1.0 2004-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Video systems (625/50 progressive) Video and accompanied data using the vertical blanking interval Analogue interface Systmes vido (625/50 progressif) Donnes vido et donnes associes utilisant lintervalle de suppression de tra
2、me Interface analogique IEC 62375:2004 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2004 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopy
3、ing and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local I
4、EC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms,
5、sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de
6、rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for
7、all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications se
8、arch - www.iec.ch/searchpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date
9、 on all new IEC publications. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in Engli
10、sh and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Serv
11、ice Centre: csciec.ch. A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le conten
12、u technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications
13、CEI en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille l
14、es nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les term
15、es quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62375 Edition
16、 1.0 2004-02 INTERNATIONAL STANDARD NORME INTERNATIONALE Video systems (625/50 progressive) Video and accompanied data using the vertical blanking interval Analogue interface Systmes vido (625/50 progressif) Donnes vido et donnes associes utilisant lintervalle de suppression de trame Interface analo
17、gique INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE P ICS 33.160.40 PRICE CODE CODE PRIX ISBN 978-2-83220-240-1 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sur
18、e that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 62375 IEC:2004 CONTENTS FOREWORD . 3 1 Scope . 5 2 Normative references . 5 3 Terms, definitions, symbols and abbreviated terms . 5
19、3.1 Terms and definitions 5 3.2 Symbols and abbreviated terms. 5 4 Defined signal 6 5 Construction of identification signal 6 5.1 Position . 6 5.2 Clock frequency 6 5.3 Signal amplitude 7 5.4 Modulation coding . 7 5.5 Preamble . 7 5.6 Data bits 7 6 Information content of data bits 9 6.1 Data group 1
20、, Aspect ratio . 9 6.2 Data group 2, Reserved 10 6.3 Data group 3, Subtitles 10 6.4 Data group 4, Surround sound and CGMS-A . 11 Annex A (informative) Rules of operation 12 Annex B (informative) Recommendation . 13 Annex C (informative) Guideline . 14 Bibliography 15 62375 IEC:2004 3 INTERNATIONAL E
21、LECTROTECHNICAL COMMISSION _ VIDEO SYSTEMS (625/50 PROGRESSIVE) VIDEO AND ACCOMPANIED DATA USING THE VERTICAL BLANKING INTERVAL ANALOGUE INTERFACE FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical
22、committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Tech
23、nical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governme
24、ntal and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or
25、agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international
26、use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to pr
27、omote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly ind
28、icated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attac
29、h to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees)
30、 and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication
31、. The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of patents. The IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assu
32、red the IEC that he/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: Sony Corporation 6-7
33、-35 Kita-shinagawa, Shinagawa-ku, 141-0001 Tokyo, Japan Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. The IEC shall not be held responsible for identifying any or all such patent rights. 4 62375
34、 IEC:2004 International Standard IEC 62375 has been prepared by IEC technical committee 100: Audio, video and multimedia systems and equipment. This bilingual version (2012-08) corresponds to the monolingual English version, published in 2004-02. The text of this standard is based on the following d
35、ocuments: CDV Report on voting 100/689/CDV 100/754/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. This publication has been drafted in accordance with
36、 the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until 2006. At this date, the publication will be reconfirmed; withdrawn; replaced by a revised edition, or amended. 62375 IEC:2004 5 VIDEO SYSTEMS (625/50 PROGRESSIVE) VIDEO AND AC
37、COMPANIED DATA USING THE VERTICAL BLANKING INTERVAL ANALOGUE INTERFACE 1 Scope This International Standard specifies the method of transfer of aspect ratio information code, copy control information code and other codes in the vertical blanking interval of the luminance signal. This International St
38、andard is applicable to the transfer of video related information with the video signal through the baseband analogue signal of 625-line/50-frame progressive scan video system between digital and analogue video equipments. 2 Normative references The following referenced documents are indispensable f
39、or the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ITU-R BT.1358: Studio parameters of 625 and 525 line progressive scan television systems 3 Terms, defin
40、itions, symbols and abbreviated terms 3.1 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1.1 letterbox picture display format to display a picture with an aspect ratio greater than the screen, in such a way that empty (black) lines are added to
41、conform to the screen 3.1.2 full format picture display format with full screen size conforming to its scanning format 3.1.3 CGMS-A copy generation management system on analogue video interface, for use in digital video recorders and digital video equipments 3.2 Symbols and abbreviated terms 0 hfall
42、ing sync edge a aspect ratio F Sclock frequency LSB Least Significant Bit MSB Most Significant Bit NRZ Non-Return-to-Zero T ddata bit period T ssampling period 6 62375 IEC:2004 4 Defined signal The signal defined in this standard is defined for use with systems complying with ITU-R BT.1358. 5 Constr
43、uction of identification signal 5.1 Position The identification signal bits shall be transmitted as a data burst in the first part of line 43. The position of the beginning of the bits shall be 5,5 s 0,125 s from 0 hof the horizontal sync, as indicated in Figure 1. This figure is intended to illustr
44、ate the position of the signalling bits in line 43. In each frame, line 43 shall be occupied with this identification signal. Peak white level Sync. level 500 mV 25 mV 13,7 s b 19,2 s 5,25 s a 5,5 s 0,125 s 0,75 s 0 h IEC 064/04Key a: Period from sync to the start point of the video effective area.
45、b: For optimum decoder performance, it is recommended that this period be free from other signals. Figure 1 Position of identification signal bits in line 43 5.2 Clock frequency The clock frequency shall be: F s= 10 MHz 1 kHz The sampling period shall be: T s= 100 ns 62375 IEC:2004 7 5.3 Signal ampl
46、itude The signal amplitude with respect to maximum video signal amplitude of 700 mV shall be: 500 mV 25 mV 5.4 Modulation coding Bi-phase coding shall be used in accordance with Figure 2. Duration of one data bit: T d+ 1 + 1 1 1 0 T d + 1 + 1 1 1 1 0 0 0 1 1 NRZ-Level Bi-Phase Level 1 T s T d IEC 06
47、5/04Figure 2 Example of bi-phase-L coding The data bits shall be inserted in bi-phase-L, in which one data bit period equals 2 3 clock periods, whereby T d= 6 T s5.5 Preamble The preamble contains a run-in and a start code. The preamble shall be in accordance with Table 1. 5.6 Data bits There shall
48、be 14 bits in total. 1 out of these 14 bits shall be allocated to the error detection code. There shall be 13 data-bits available for transmission of information. 8 62375 IEC:2004 Table 1 Identification signal bits transmission scheme Identification signal bits transmission Insertion: line 43 Coding
49、: Bi-phase modulation coding Clock: 10 MHz (T s= 100 ns) Run-in Start code Group 1 aspect ratio Group 2 reserved Group 3 subtitles Group 4 others 29 elements based on 10 MHz 24 elements based on 10 MHz 24 elements based on 10 MHz 24 elements based on 10 MHz 18 elements based on 10 MHz 18 elements based on 10 MHz bit numbering 0 1 2 3 LSB MSB per info bit (note) “0“ = 000 111 “1
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1