1、 IEC 62503 Edition 1.0 2008-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Multimedia quality Method of assessment of synchronization of audio and video Qualit pour les systmes multimdia Mthode dvaluation de la synchronisation de laudio et de la vido IEC 62503:2008-09(en-fr) colour inside THIS PUBLI
2、CATION IS COPYRIGHT PROTECTED Copyright 2008 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing
3、from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further informat
4、ion. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de
5、 lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, ru
6、e de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Abou
7、t IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the e
8、ntire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of c
9、riteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online a
10、nd also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 14 additional languages. Also known as the International Electr
11、otechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 55 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC
12、TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire o
13、rganisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus
14、rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour P
15、C, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplac
16、es ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne
17、 de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 14 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 55 0
18、00 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsi
19、rez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62503 Edition 1.0 2008-09 INTERNATIONAL STANDARD NORME INTERNATIONALE Multimedia quality Method of assessment of synchronization of audio and video Qualit pour les systmes multimdia Mt
20、hode dvaluation de la synchronisation de laudio et de la vido INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE M ICS 33.160.01 PRICE CODE CODE PRIX ISBN 978-2-8322-1359-9 Registered trademark of the International Electrotechnical Commission Marque dpose de la Comm
21、ission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 62503:2008 IEC 2008 CONTENTS FOREWORD . 3 INTRODUCTION . 5
22、 1 Scope . 6 2 Normative reference . 6 3 Terms and definitions . 6 4 Overview of methods of assessment . 7 5 Subjective assessment of lip sync 7 5.1 Items to be assessed 7 5.2 Preparation of test video clips and test video sequence . 8 5.2.1 Selection of content of a test video clip 8 5.2.2 Creation
23、 of a test video sequence 8 5.3 Procedures and condition for assessment of lip sync at the section 3-3 9 5.4 Reporting of the result of assessment 9 6 Data processing . 10 6.1 Items to be assessed 10 6.2 Method of assessment. 10 6.3 Reporting of the result of estimation 11 Bibliography 12 Figure 1 O
24、verview 7 Figure 2 Preparation of test video clips with time shifted audio 8 Figure 3 An example of subjective assessment of lip sync . 10 Figure 4 Normalized response for grading impairment caused by lip sync mismatch . 11 Table 1 Five-grade impairment scale and explanation of subjective opinion sc
25、ore. 9 IEC 62503:2008 IEC 2008 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ MULTIMEDIA QUALITY METHOD OF ASSESSMENT OF SYNCHRONIZATION OF AUDIO AND VIDEO FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrote
26、chnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specificatio
27、ns, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International,
28、governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decis
29、ions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for intern
30、ational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In ord
31、er to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be cle
32、arly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensure that they have the latest edition of this publication. 7) No liability sha
33、ll attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including leg
34、al fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this pub
35、lication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62503 has been prepared by technical area 11: Quality
36、for audio, video and multimedia systems, of IEC technical committee 100: Audio, video and multimedia systems and equipment. This bilingual version (2014-04) corresponds to the monolingual English version, published in 2008-09. The text of this standard is based on the following documents: CDV Report
37、 on voting 100/1277/CDV 100/1358/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. The French version of this standard has not been voted upon. 4 IEC 62503:2008 IEC 2008 This publication has been drafted in accorda
38、nce with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication
39、will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this docu
40、ment using a colour printer. IEC 62503:2008 IEC 2008 5 INTRODUCTION Contemporary multimedia systems are realized by digital technology. Depending on what digital processing is being applied, time delays differ among medium channels for reproduction as perceptible stimulus for a human audience. An ex
41、ample is video delay against audio, which is identified by such terms as lip sync or AV-sync. Video delay against audio will be inevitable for large sized displays, because necessary time for rendering and visualization will be proportional to the number of picture elements. There should also be add
42、itional factors to be considered. They include synchronization problem during medium gathering, production, post-production, processing in various aspects to combine these multiple media and to be sent out or recorded as “multimedia”. There is a need for international standards to provide the follow
43、ing three related methodologies: a) an objective method of measurement for difference of delays between reproduced audio and video (lip sync) by multimedia systems and equipment, b) a subjective (or perceptible) and statistical method of assessment of overall difference of delays between a real worl
44、d and a reproduced scene and sound, c) a method of estimation of implied difference of delays inherent in multimedia received, recorded or under reproduction. This International Standard addresses the item b) using typical multimedia content such as bust shots of news casters because of easiness in
45、defining synchronization of audio and video. Since a range of perceptibly allowable miss-synchronization and sensitivity of human audience for lead and delayed audio against accompanied video depends on human sensation and the conditions for assessment, a clearly defined method of assessment of such
46、 characteristics should be standardised. This International Standard is intended to supplement Recommendation ITU-R BT.1359-1, 1 1 , as well as partly answer the request of ITU-R to IEC that has been stated in Recommendation ITU-R BT.1377 2. Technical contents are based on a study in Faculty of Engi
47、neering, Chiba University in Japan, conducted in April 2006. _ 1Numbers in square brackets refer to the Bibliography. 6 IEC 62503:2008 IEC 2008 MULTIMEDIA QUALITY METHOD OF ASSESSMENT OF SYNCHRONIZATION OF AUDIO AND VIDEO 1 Scope This International Standard provides a subjective (or perceptible) and
48、 statistical method of assessment of overall, or end-to-end, difference of delays between real world and reproduced scenes in terms of video and accompanying audio recoded in a medium. This International Standard does not specify limiting values for those results obtained by the application of the p
49、rovisions in this standard. It excludes applications to professional broadcast systems. 2 Normative reference The following referenced document is indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. ITU-R BT.500-11:2002, Methodology for the su
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1