IEC 62561-1-2017 Lightning protection system components (LPSC) - Part 1 Requirements for connection components《避雷系统组件(LPSC).第1部分 连接组件的要求》.pdf

1、 IEC 62561-1 Edition 2.0 2017-03 REDLINE VERSION Lightning protection system components (LPSC) Part 1: Requirements for connection components IEC 62561-1:2017-03 RLV(en) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwis

2、e specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questio

3、ns about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 in

4、foiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC public

5、ations is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International

6、 Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,)

7、 It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.elec

8、tropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/gl

9、ossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc

10、 If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC 62561-1 Edition 2.0 2017-03 REDLINE VERSION Lightning protection system components (LPSC) Part 1: Requirements for connection components INTERNATIONAL ELEC

11、TROTECHNICAL COMMISSION ICS 29.020; 91.120.40 ISBN 978-2-8322-4104-2 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. colour inside 2 IEC 62561-1:2017 RLV IEC 2017 CONTENTS FOREWORD . 4 INTRODU

12、CTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Classification . 9 4.1 According to the ability to withstand lightning current 9 4.2 According to the installation of connection components location . 9 4.3 According to the mechanical behaviour of connection components . 9 4.4

13、 According to whether or not a connection is permanent 9 5 Requirements 9 5.1 General . 9 5.2 Installation instructions . 9 5.3 Lightning current carrying capability 10 5.4 Static mechanical stress . 10 5.5 Permanent connection 10 5.6 Screwed-clamping Non-permanent connection 10 5.7 Dismantling of t

14、est joints . 10 5.8 Damage to conductors and metal installations 10 5.9 Safe Reliable connection 10 5.10 Terminals of bonding bars . 10 5.11 Marking . 11 6 Tests . 11 6.1 General condition for on tests . 11 6.2 Test Preparation of the specimen 11 6.2.1 Arrangement of the specimen 6.3 Conditioning/ag

15、eing 15 6.3.1 Connection components not embedded in concrete . 15 6.3.2 Connection components embedded in concrete . 15 6.4 Electrical test 16 6.5 Static mechanical test . 17 6.5.1 General . 17 6.5.2 Test procedure 17 6.6 Marking test 17 7 Electromagnetic compatibility (EMC) . 18 8 Structure and con

16、tent of the test report 18 8.1 General . 18 8.2 Report identification 18 8.3 Specimen description 18 8.4 Conductor . 19 8.5 Standards and references . 19 8.6 Test procedure 19 8.7 Testing equipment description 19 8.8 Measuring instruments description 19 8.9 Results and parameters recorded . 19 IEC 6

17、2561-1:2017 RLV IEC 2017 3 8.10 Statement of pass/fail . 19 Annex A (informative normative) Summary of the requirements and corresponding tests 20 Annex B (informative) Typical arrangements connection configurations for various LPSCs . 21 Annex C (normative) Flow chart of tests for connection compon

18、ents 22 Annex D (normative) Conditioning/ageing for connection components . 24 D.1 General . 24 D.2 Salt mist treatment 24 D.3 Humid sulphurous atmosphere treatment 24 D.4 Ammonia atmosphere treatment 24 Bibliography 25 Figure 1 Basic arrangement of specimen with cross-connection component . 12 Figu

19、re 2 Basic arrangement of specimen with parallel connection component 13 Figure 3 Basic arrangement of specimen with bridging component . 14 Figure 4 Basic arrangement of specimen with equipotential bonding bar 15 Figure 5 Basic arrangement for contact measurement of expansion piece 17 Figure B.1 Ty

20、pical arrangements for various LPSCs 21 Figure C.1 Flow chart of tests for connection components . 23 Table 1 Lightning impulse current (I imp ) parameters 16 Table A.1 Requirements and corresponding tests 20 4 IEC 62561-1:2017 RLV IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LIGHTNING PROTE

21、CTION SYSTEM COMPONENTS (LPSC) Part 1: Requirements for connection components FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote

22、 international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (he

23、reafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also p

24、articipate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible

25、 an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While

26、all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to

27、apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation

28、of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this

29、publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indir

30、ect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the

31、 correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. DISCLAIMER This Redline version is not an officia

32、l IEC Standard and is intended only to provide the user with an indication of what changes have been made to the previous version. Only the current version of the standard is to be considered the official document. This Redline version provides you with a quick and easy way to compare all the change

33、s between this standard and its previous edition. A vertical bar appears in the margin wherever a change has been made. Additions are in green text, deletions are in strikethrough red text. IEC 62561-1:2017 RLV IEC 2017 5 International Standard IEC 62561-1 has been prepared by IEC technical committe

34、e 81: Lightning protection. This second edition cancels and replaces the first edition, published in 2012. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) classification of connection components

35、 in permanent and non-permanent connection; b) requirements and corresponding tests for permanent connection components such as exothermic, brazing, welding, crimping, seaming; c) flow chart of tests for connection components. The text of this standard is based on the following documents: FDIS Repor

36、t on voting 81/551/FDIS 81/559/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 62561

37、series, published under the general title Lightning protection system components (LPSC), can be found on the IEC website. The committee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data

38、 related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The “colour inside” logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct under

39、standing of its contents. Users should therefore print this publication using a colour printer. 6 IEC 62561-1:2017 RLV IEC 2017 INTRODUCTION This part of IEC 62561 deals with the requirements and tests for lightning protection system components (LPSC) used for the installation of a lightning protect

40、ion system (LPS) designed and implemented according to the IEC 62305 series. IEC 62561-1:2017 RLV IEC 2017 7 LIGHTNING PROTECTION SYSTEM COMPONENTS (LPSC) Part 1: Requirements for connection components 1 Scope This part of IEC 62561 specifies the requirements and tests for metallic connection compon

41、ents that form part of a lightning protection system (LPS). Typically, these can be connectors, clamps, bonding and bridging components, expansion pieces and test joints. For the purposes of this document the following connection types are considered as connection components: exothermic, brazing, we

42、lding, clamping, crimping, seaming, screwing or bolting. Testing of components for an explosive atmosphere is not covered by this document. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this docu

43、ment. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60068-2-52:1996, Environmental testing Part 2-52: Tests Test Kb: Salt mist, cyclic (sodium chloride solution) IEC 62305-1, Protect

44、ion against lightning Part 1: General principles IEC 62561-2, Lightning protection system components (LPSC) Part 2: Requirements for conductors and earth electrodes ISO 6957:1988, Copper alloys Ammonia test for stress corrosion resistance ISO 6988:1985, Metallic and other non-organic coatings Sulphu

45、r dioxide test with general condensation of moisture 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.ele

46、ctropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 3.1 connection component part of an external LPS which is used for the connection of conductors to each other or to metallic installations 8 IEC 62561-1:2017 RLV IEC 2017 Note 1 to entry: Connection components include co

47、nnectors, clamps, bridging components, expansion pieces and test joints. 3.2 metal installation extended metal items in the structure to be protected which may form a path for lightning current, such as pipes, staircases, elevator guide rails, ventilation, heating and air conditioning ducts, and int

48、erconnected reinforcing steel 3.3 bridging component connection component for the connection of metal installations 3.4 expansion piece connection component designed to compensate for changes in length in conductors and/or metal installations caused by temperature changes 3.5 connector connection co

49、mponent to interconnect two or more conductors 3.6 clamp connection component for the connection of conductors to metal installations 3.7 pipe clamp clamp for the connection of conductors to metal pipes 3.8 test joint joint designed to facilitate electrical testing and measurement of LPS components 3.9 connection range minimum to maximum range for which a specific connection component is designed to be used 3.10 bonding bar metal bar on which metal installations, external c