1、 IEC 62599-1 Edition 1.0 2010-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Alarm systems Part 1: Environmental test methods Systmes dalarme Partie 1: Mthodes dessais denvironnement IEC 62599-1:2010 THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2010 IEC, Geneva, Switzerland All rights reserved.
2、 Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you
3、have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publ
4、ication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou s
5、i vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central Office 3, rue de Varemb CH-1211 Geneva 20 Switzerland Email: inmailiec.ch Web: www.iec.ch About the IEC The Internati
6、onal Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please mak
7、e sure that you have the latest edition, a corrigenda or an amendment might have been published. Catalogue of IEC publications: www.iec.ch/searchpub The IEC on-line Catalogue enables you to search by a variety of criteria (reference number, text, technical committee,). It also gives information on p
8、rojects, withdrawn and replaced publications. IEC Just Published: www.iec.ch/online_news/justpub Stay up to date on all new IEC publications. Just Published details twice a month all new publications released. Available on-line and also by email. Electropedia: www.electropedia.org The worlds leading
9、 online dictionary of electronic and electrical terms containing more than 20 000 terms and definitions in English and French, with equivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary online. Customer Service Centre: www.iec.ch/webstore/custserv If y
10、ou wish to give us your feedback on this publication or need further assistance, please visit the Customer Service Centre FAQ or contact us: Email: csciec.ch Tel.: +41 22 919 02 11 Fax: +41 22 919 03 00 A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisatio
11、n mondiale qui labore et publie des normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publications de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcen
12、te, un corrigendum ou amendement peut avoir t publi. Catalogue des publications de la CEI: www.iec.ch/searchpub/cur_fut-f.htm Le Catalogue en-ligne de la CEI vous permet deffectuer des recherches en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Il donne aussi des informations
13、 sur les projets et les publications retires ou remplaces. Just Published CEI: www.iec.ch/online_news/justpub Restez inform sur les nouvelles publications de la CEI. Just Published dtaille deux fois par mois les nouvelles publications parues. Disponible en-ligne et aussi par email. Electropedia: www
14、electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les langues additionnelles. Egalement appel Vocabulaire Electrotechnique International en l
15、igne. Service Clients: www.iec.ch/webstore/custserv/custserv_entry-f.htm Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions, visitez le FAQ du Service clients ou contactez-nous: Email: csciec.ch Tl.: +41 22 919 02 11 Fax: +41 22 919 03 00 IEC 62599-1 Edit
16、ion 1.0 2010-05 INTERNATIONAL STANDARD NORME INTERNATIONALE Alarm systems Part 1: Environmental test methods Systmes dalarme Partie 1: Mthodes dessais denvironnement INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE W ICS 13.320 PRICE CODE CODE PRIX ISBN 978-2-8891
17、0-923-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale 2 62599-1 IEC:2010 CONTENTS FOREWORD.7 INTRODUCTION.9 1 Scope.10 2 Normative references11 3 Terms, definitions and abbreviations.11 3.1 Terms and definitions 12
18、 3.2 Abbreviations.12 4 Environmental classes 13 5 Standard laboratory conditions13 6 Tolerances .13 7 Information to be included in the relevant product standard .13 8 Dry heat (operational) .14 8.1 Object of the test .14 8.2 Principle 14 8.3 Test procedure 14 8.3.1 General .14 8.3.2 Initial measur
19、ements14 8.3.3 State of specimen during conditioning 15 8.3.4 Conditioning 15 8.3.5 Measurements during conditioning .15 8.3.6 Final measurements 15 9 Dry heat (endurance) 15 9.1 Object of the test .15 9.2 Principle 15 9.3 Test procedure 15 9.3.1 General .15 9.3.2 Initial measurements15 9.3.3 State
20、of specimen during conditioning 16 9.3.4 Conditioning 16 9.3.5 Measurements during conditioning .16 9.3.6 Final measurements 16 10 Cold (operational) .16 10.1 Object of the test .16 10.2 Principle 16 10.3 Test procedure 16 10.3.1 General .16 10.3.2 Initial measurements16 10.3.3 State of specimen dur
21、ing conditioning 17 10.3.4 Conditioning 17 10.3.5 Measurements during conditioning .17 10.3.6 Final measurements 17 11 Temperature change (operational) 17 11.1 Object of the test .17 11.2 Principle 17 11.3 Test procedure 17 62599-1 IEC:2010 3 11.3.1 General .17 11.3.2 Initial measurements17 11.3.3 S
22、tate of specimen during conditioning 17 11.3.4 Conditioning 18 11.3.5 Measurements during conditioning .18 11.3.6 Final measurements 18 12 Damp heat, steady state (operational).18 12.1 Object of the test .18 12.2 Principle 18 12.3 Test procedure 18 12.3.1 General .18 12.3.2 Initial measurements18 12
23、3.3 State of specimen during conditioning 19 12.3.4 Conditioning 19 12.3.5 Measurements during conditioning .19 12.3.6 Final measurements 19 13 Damp heat, steady state (endurance)19 13.1 Object of the test .19 13.2 Principle 19 13.3 Test procedure 19 13.3.1 General .19 13.3.2 Initial measurements20
24、 13.3.3 State of specimen during conditioning 20 13.3.4 Conditioning 20 13.3.5 Measurements during conditioning .20 13.3.6 Final measurements 20 14 Damp heat, cyclic (operational).20 14.1 Object of the test .20 14.2 Principle 20 14.3 Test procedure 20 14.3.1 General .20 14.3.2 Initial measurements21
25、 14.3.3 State of specimen during conditioning 21 14.3.4 Conditioning 21 14.3.5 Measurements during conditioning .21 14.3.6 Final measurements 21 15 Damp heat, cyclic (endurance)21 15.1 Object of the test .21 15.2 Principle 21 15.3 Test procedures 21 15.3.1 General .21 15.3.2 Initial measurements22 1
26、5.3.3 State of specimen during conditioning 22 15.3.4 Conditioning 22 15.3.5 Measurements during conditioning .22 15.3.6 Final measurements 22 16 Water ingress (operational).22 16.1 Object of the test .22 16.2 Principle 22 4 62599-1 IEC:2010 16.3 Test procedure 22 16.3.1 General .22 16.3.2 Initial m
27、easurements22 16.3.3 State of specimen during conditioning 23 16.3.4 Conditioning 23 16.3.5 Measurements during conditioning .23 16.3.6 Final measurements 24 17 Sulphur dioxide (SO 2 ) (endurance) .24 17.1 Object of the test .24 17.2 Principle 24 17.3 Test procedure 24 17.3.1 General .24 17.3.2 Init
28、ial measurements24 17.3.3 State of specimen during conditioning 24 17.3.4 Conditioning 24 17.3.5 Measurements during conditioning .25 17.3.6 Final measurements 25 18 Salt mist, cyclic (endurance) .25 18.1 Object of the test .25 18.2 Principle 25 18.3 Test procedure 25 18.3.1 General .25 18.3.2 Initi
29、al measurements25 18.3.3 State of specimen during conditioning 25 18.3.4 Conditioning 25 18.3.5 Measurements during conditioning .26 18.3.6 Final measurements 26 19 Shock (operational).26 19.1 Object of the test .26 19.2 Principle 26 19.3 Test procedure 26 19.3.1 General .26 19.3.2 Initial measureme
30、nts27 19.3.3 State of specimen during conditioning 27 19.3.4 Conditioning 27 19.3.5 Measurements during conditioning .27 19.3.6 Final measurements 28 20 Impact (operational)28 20.1 Object of the test .28 20.2 Principle 28 20.3 Test procedure 28 20.3.1 General .28 20.3.2 Initial measurements28 20.3.3
31、 State of specimen during conditioning 28 20.3.4 Conditioning 28 20.3.5 Measurements during conditioning .29 20.3.6 Final measurements 29 21 Free fall (operational) .29 21.1 Object of the test .29 62599-1 IEC:2010 5 21.2 Principle 29 21.3 Test procedure 29 21.3.1 General .29 21.3.2 Initial measureme
32、nts29 21.3.3 State of specimen during conditioning 29 21.3.4 Conditioning 29 21.3.5 Measurements during conditioning .30 21.3.6 Final measurements 30 22 Vibration, sinusoidal (operational) .30 22.1 Object of the test .30 22.2 Principle 30 22.3 Test procedure 30 22.3.1 General .30 22.3.2 Initial meas
33、urements30 22.3.3 State of specimen during conditioning 31 22.3.4 Conditioning 31 22.3.5 Measurements during conditioning .31 22.3.6 Final measurements 31 23 Vibration, sinusoidal (endurance) 31 23.1 Object of the test .31 23.2 Principle 31 23.3 Test procedure 31 23.3.1 General .31 23.3.2 Initial me
34、asurements32 23.3.3 State of specimen during conditioning 32 23.3.4 Conditioning 32 23.3.5 Measurements during conditioning .32 23.3.6 Final measurements 32 24 Simulated solar radiation, temperature rise (operational).32 24.1 Object of the test .32 24.2 Principle 32 24.3 Test procedure 33 24.3.1 Gen
35、eral .33 24.3.2 Initial measurements33 24.3.3 State of specimen during conditioning 33 24.3.4 Conditioning 33 24.3.5 Measurements during conditioning .33 24.3.6 Final measurements 33 25 Simulated solar radiation, surface degradation (endurance).33 25.1 Object of the test .33 25.2 Principle 33 25.3 T
36、est procedure 34 25.3.1 General .34 25.3.2 Initial measurements34 25.3.3 State of specimen during conditioning 34 25.3.4 Conditioning 34 25.3.5 Measurements during conditioning .34 25.3.6 Final measurements 34 26 Dust tightness (endurance) .34 6 62599-1 IEC:2010 26.1 Object of the test .34 26.2 Prin
37、ciple 34 26.3 Test procedure 35 26.3.1 General .35 26.3.2 Initial measurements35 26.3.3 State of specimen during conditioning 35 26.3.4 Conditioning 35 26.3.5 Measurements during conditioning .36 26.3.6 Final measurements 36 Bibliography37 Figure 1 Graph showing peak acceleration versus. specimen ma
38、ss. .27 Table 1 .15 Table 2 .16 Table 3 .17 Table 4 .18 Table 5 .19 Table 6 .20 Table 7 .21 Table 8 .22 Table 9 .23 Table 10 .23 Table 11 .24 Table 12 .26 Table 13 .27 Table 14 .29 Table 15 .30 Table 16 .31 Table 17 .32 Table 18 .33 Table 19 .34 Table 20 .35 Table 21 .36 62599-1 IEC:2010 7 INTERNATI
39、ONAL ELECTROTECHNICAL COMMISSION _ ALARM SYSTEMS Part 1: Environmental test methods FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to p
40、romote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guid
41、es (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC
42、also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as po
43、ssible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense.
44、While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees underta
45、ke to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attest
46、ation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of
47、 this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or
48、 indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable f
49、or the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62599-1 has been prepared by IEC technical committee 79: Alarm and electronic security systems. This standard is based on EN 50130-5 (1995) and its a
copyright@ 2008-2019 麦多课文库（www.mydoc123.com）网站版权所有
备案/许可证编号：苏ICP备17064731号-1