IEC 62612-2013 Self-ballasted LED lamps for general lighting services with supply voltages 50 V - Performance requirements《用于一般照明服务且电源电压大于50 V的自镇流LED灯 性能要求》.pdf

1、 IEC 62612 Edition 1.0 2013-06 INTERNATIONAL STANDARD NORME INTERNATIONALE Self-ballasted LED lamps for general lighting services with supply voltages 50 V Performance requirements Lampes LED autoballastes pour lclairage gnral avec des tensions dalimentation 50 V Exigences de performances IEC62612:2

2、013 colourinsideTHIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2013 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, with

3、out permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Comm

4、ittee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de la

5、 CEI ou du Comit national de la CEI du pays du demandeur. Si vous avez des questions sur le copyright de la CEI ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de la CEI de votre pays de rsidence. IEC Central O

6、ffice Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electro

7、nic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. Useful links: IEC publications search - www.iec.ch/searc

8、hpub The advanced search enables you to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publica

9、tions. Just Published details all new publications released. Available on-line and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equ

10、ivalent terms in additional languages. Also known as the International Electrotechnical Vocabulary (IEV) on-line. Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch.

11、A propos de la CEI La Commission Electrotechnique Internationale (CEI) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications CEI Le contenu technique des publica

12、tions de la CEI est constamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Liens utiles: Recherche de publications CEI - www.iec.ch/searchpub La recherche avance vous permet de trouver des publications CEI en utilisant diffre

13、nts critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplaces ou retires. Just Published CEI - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications de la CEI. Just Published dtaille les nouvelles publicatio

14、ns parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne au monde de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans les

15、langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (VEI) en ligne. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62612 Edition 1.0 2013-06 INTERNATIO

16、NAL STANDARD NORME INTERNATIONALE Self-ballasted LED lamps for general lighting services with supply voltages 50 V Performance requirements Lampes LED autoballastes pour lclairage gnral avec des tensions dalimentation 50 V Exigences de performances INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSIO

17、N ELECTROTECHNIQUE INTERNATIONALE X ICS 29.140.01 PRICE CODE CODE PRIX ISBN 978-2-83220-872-4 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized d

18、istributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colourinside 2 62612 IEC:2013 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Terms and definitions . 8 4 General requirements on tests 11 5 Marking 11 5.1 Gen

19、eral requirements for marking . 11 5.2 Places of marking 12 6 Dimensions 12 7 Test conditions . 12 7.1 General test conditions 12 7.2 Creation of lamp families to reduce test effort 13 7.2.1 General . 13 7.2.2 Variations within a family . 13 7.2.3 Compliance testing of family members . 14 8 Lamp inp

20、ut . 14 8.1 Lamp power 14 8.2 Displacement factor . 15 9 Light output 15 9.1 Luminous flux 15 9.2 Luminous intensity distribution, peak intensity and beam angle . 15 9.2.1 General . 15 9.2.2 Measurement . 15 9.2.3 Luminous intensity distribution . 15 9.2.4 Peak intensity value 16 9.2.5 Beam angle va

21、lue 16 9.3 Efficacy . 16 10 Colour nomenclature, variation and rendering. 16 10.1 Colour variation categories 16 10.2 Colour rendering index (CRI) . 18 11 Lamp life 18 11.1 General . 18 11.2 Lumen maintenance 18 11.3 Endurance tests 20 11.3.1 General . 20 11.3.2 Temperature cycling test . 20 11.3.3

22、Supply switching test . 21 11.3.4 Accelerated operational life test . 21 12 Verification . 21 Annex A (normative) Method of measuring lamp characteristics . 23 Annex B (normative) Explanation of the photometric code 30 Annex C (normative) Measurement of displacement factor . 31 Annex D (informative)

23、 Explanation of displacement factor 33 Annex E (informative) Explanation of recommended life time metrics . 35 62612 IEC:2013 3 Annex F (informative) Examples of LED dies and LED packages . 40 Bibliography 42 Figure 1 Luminous flux depreciation over test time . 20 Figure A.1 Relation of rated voltag

24、e to test voltage 24 Figure A.2 Relation of rated frequency to test frequency 24 Figure A.3 Relation of type of tests to test voltage and test frequency 25 Figure C.1 Definition of the 1stharmonic current phase-angle (1) (I1leads Umains, 1 0) 31 Figure C.2 Definition of the 1stharmonic current phase

25、angle (1) (I1lags Umains, 150 V PERFORMANCE REQUIREMENTS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-op

26、eration on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to

27、as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this pr

28、eparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international co

29、nsensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable effort

30、s are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publication

31、s transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Indepe

32、ndent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No li

33、ability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (in

34、cluding legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application

35、of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62612 has been prepared by subcommittee 34A

36、 Lamps, of IEC technical committee 34: Lamps and related equipment. This first edition of IEC 62612 cancels and replaces IEC/PAS 62612. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to IEC/PAS 62612. a) The standard exp

37、licitly states that real life time tests are not part of the test regime. Instead, a period of up to 6 000 h is chosen in order to assess manufacturers claims of maintenance. b) Technical features have been adapted to IEC/PAS 62717 (performance of LED modules) as far as possible. Examples are the fa

38、mily approach and the temperature measuring point. c) Marking requirements are shifted from the product to the packaging. d) The number of lamps to be tested is made test specific, not general. 62612 IEC:2013 5 e) First requirements are given for setting the colour for colour adjustable lamps and th

39、e luminous flux level of dimmable lamps. f) The structure of tests is clearly divided between requirement and compliance. g) Statistical compliance is separated into individual and average. h) Light output requirements are extended to luminous intensity distribution, peak intensity, beam angle and e

40、fficacy. i) The use of the terms “correlated colour temperature” and “chromaticity coordinates” is corrected. j) The number of tolerance categories is reduced from 8 to 4, and split between initial and maintained values. k) Colour rendering is differently assessed at initial and maintained state. l)

41、 Three lumen maintenance categories are given instead of five. m) The endurance tests are completely re-established. n) The verification (formerly: assessment) clause is completed. o) Information for luminaire design is added. p) Stabilisation is more precise (Annex A on the method of measuring lamp

42、 characteristics) and extension is made for the additional photometric and colorimetric parameters. q) Annex B on measuring luminous flux is contained in Annex A. New Annex B provides the photometric code. r) Further annexes are added: Annex C and D for displacement factor, Annex E for life time met

43、rics/reliability and Annex F for examples of LED dies and LED packages. The text of this standard is based on the following documents: FDIS Report on voting 34A/1662/FDIS 34A/1679/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in t

44、he above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. In this standard, the following print types are used: requirements: roman type; test specifications: italic type; notes: small roman type. The committee has decided that the contents of this publicat

45、ion will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on

46、 the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. 6 62612 IEC:2013 INTRODUCTION This International Standard is the first edition of

47、 a performance standard (precursor: IEC/PAS 62612) for self-ballasted LED lamps for general lighting applications and acknowledges the need for relevant tests for this new source of electrical light, sometimes called “solid state lighting”. The provisions in this standard represent the technical kno

48、wledge of experts from the fields of the semiconductor (LED chip) industry and of those of the traditional electrical light sources. 62612 IEC:2013 7 SELF-BALLASTED LED LAMPS FOR GENERAL LIGHTING SERVICES WITH SUPPLY VOLTAGES 50 V PERFORMANCE REQUIREMENTS 1 Scope This International Standard specifie

49、s the performance requirements, together with the test methods and conditions, required to show compliance of LED lamps with integral means for stable operation, intended for domestic and similar general lighting purposes, having: a rated power up to 60 W; a rated voltage of 50 V a.c. up to 250 V a.c.; a lamp cap as listed in IEC 62560. These performance requirements are additional to the safety requirements in IEC 62560.