IEC 62912-2015 Railway applications - Direct current signalling monostable relays of type N and type C《轨道交通 N类和C类直流信号单稳态继电器》.pdf

1、 IEC 62912 Edition 1.0 2015-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Direct current signalling monostable relays of type N and type C Applications ferroviaires Relais monostables de signalisation en courant continu de type N et de type C IEC 62912:2015-07(en-fr) THIS PUBLI

2、CATION IS COPYRIGHT PROTECTED Copyright 2015 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing

3、from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further informat

4、ion. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de

5、 lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, ru

6、e de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. Abou

7、t IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the e

8、ntire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of c

9、riteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online a

10、nd also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing more than 30 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electr

11、otechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary More than 60 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC

12、TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internationale (IEC) est la premire o

13、rganisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vous possdez ldition la plus

14、rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents de lIEC. Disponible pour P

15、C, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets et les publications remplac

16、es ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le premier dictionnaire en ligne

17、 de termes lectroniques et lectriques. Il contient plus de 30 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glossary Plus de 60 0

18、00 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc Si vous dsi

19、rez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62912 Edition 1.0 2015-07 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Direct current signalling monostable relays of type N and type C Applications ferroviaires Re

20、lais monostables de signalisation en courant continu de type N et de type C INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 45.060 ISBN 978-2-8322-2818-0 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Elect

21、rotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. 2 IEC 62912:2015 IEC 2015 CONTENTS FOREWORD 3 INTRODUCTION 5 1 Scope .6 2 Normative refere

22、nces 6 3 Terms and definitions 6 4 Classification .9 5 Essential requirements of the relays and their construction 9 5.1 Generic requirements for signalling relays .9 5.1.1 Forcibly guided (mechanically linked) contacts .9 5.1.2 Forcibly guided (mechanically linked) operation 9 5.2 Specific requirem

23、ents 10 5.2.1 Relays of type N 10 5.2.2 Relays of type C 10 5.3 Mechanical construction of the signalling relays 10 5.3.1 Connecting devices 10 5.3.2 Materials and arrangement. 10 5.4 Environmental conditions 10 5.4.1 General . 10 5.4.2 Vibrations and shocks 10 5.5 Magnetic system . 11 5.5.1 General

24、 . 11 5.5.2 Requirements for new relays 11 5.5.3 Functioning during service . 11 5.6 Design of insulation 12 5.6.1 General . 12 5.6.2 Overvoltage . 12 5.6.3 Test voltage . 12 5.6.4 Case of a supply circuit not connected to earth 12 5.6.5 Pollution 12 5.7 Contacts . 12 5.7.1 Spacing . 12 5.7.2 Break

25、contact 13 5.7.3 Contact heating . 13 5.7.4 Service life. 13 5.7.5 Minimum distance apart of the relay contact elements 13 5.7.6 Contact force . 13 5.7.7 Self-cleaning 14 5.7.8 Bounce 14 Bibliography . 15 IEC 62912:2015 IEC 2015 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RAILWAY APPLICATIONS DIRE

26、CT CURRENT SIGNALLING MONOSTABLE RELAYS OF TYPE N AND TYPE C FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co

27、-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred

28、to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in thi

29、s preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internationa

30、l consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable ef

31、forts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publica

32、tions transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. In

33、dependent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) N

34、o liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs

35、 (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct applicat

36、ion of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62912 has been prepared by IEC technica

37、l committee 9: Electrical equipment and systems for railways. This standard is derived from EN 50578. The text of this standard is based on the following documents: FDIS Report on voting 9/2039/FDIS 9/2061/RVD Full information on the voting for the approval of this standard can be found in the repor

38、t on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 62912:2015 IEC 2015 The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “

39、http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 62912:2015 IEC 2015 5 INTRODUCTION This International Standard gives a set of generic and specific requirements for dir

40、ect current signalling relays. This International Standard introduces a set of recommendations and requirements for signalling relay characteristics, construction, magnetic system, contacts and insulation. Requirements are coordinated with current international standards on all-or-nothing relays. 6

41、IEC 62912:2015 IEC 2015 RAILWAY APPLICATIONS DIRECT CURRENT SIGNALLING MONOSTABLE RELAYS OF TYPE N AND TYPE C 1 Scope This International Standard gives requirements for direct current relays intended for safety- related applications in railway signalling installations. This International Standard is

42、 applicable to monostable relays of type N and type C. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest

43、edition of the referenced document (including any amendments) applies. IEC 60664-1, Insulation coordination for equipment within low-voltage systems Part 1: Principles, requirements and tests IEC 61810-3:2015, Electromechanical elementary relays Part 3: Relays with forcibly guided (mechanically link

44、ed) contacts IEC 62497-1, Railway applications Insulation coordination Part 1: Basic requirements Clearances and creepage distances for all electrical and electronic equipment IEC 62498-3: 2010, Railway applications Environmental conditions for equipment Part 3: Equipment for signalling and telecomm

45、unications 3 Terms and definitions For the purposes of this document, the following terms and definitions apply. 3.1 all-or-nothing relay electrical relay, which is intended to be energised by a quantity, the value of which is either within its operative range or effectively zero Note 1 to entry: “A

46、ll-or-nothing relays“ include both “elementary relays“ and “time relays“. SOURCE: IEC 60050-444:2002, 444-01-02 3.2 armature moveable part of a relay that controls contact members 3.3 bistable relay electrical relay which, having responded to an energising quantity and having changed its condition,

47、remains in that condition after the quantity has been removed; a further appropriate energisation is required to make it change its condition IEC 62912:2015 IEC 2015 7 SOURCE: IEC 60050-444:2002, 444-01-08 3.4 bounce time for a contact which is closing/opening its circuit, time interval between the

48、instant when the contact circuit first closes/opens and the instant when the circuit is finally closed/opened SOURCE: IEC 60050-444:2002, 444-05-04 3.5 break contact contact which is open when the relay is in its operate condition and which is closed when the relay is in its release condition SOURCE

49、: IEC 60050-444:2002, 444-04-18 3.6 change-over contact combination of two contact circuits with three contact members, one of which is common to the two contact circuits; such that when one of these contact circuits is open, the other is closed SOURCE: IEC 60050-444:2002, 444-04-19 3.7 contact gap gap between the contact points when the contact circuit is open SOURCE: IEC 60050-444:2002, 444-04-09 3.8 contact me