IEC 62917-2016 Railway applications - Fixed installations - Electric traction - Copper and copper alloy grooved contact wires《轨道交通 固定装置 电力牵引 铜和铜合金槽接触线》.pdf

1、 IEC 62917 Edition 1.0 2016-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Fixed installations Electric traction Copper and copper alloy grooved contact wires Applications ferroviaires Installations fixes Traction lectrique Fils de contact rainurs en cuivre et en cuivre alli IEC

2、 62917:2016-10(en-fr) colour inside THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying

3、 and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please contact the address below or your local IEC

4、member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y compris la photocopie et les microfilms, san

5、s laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit national de lIEC de votre pays de rsidence. I

6、EC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electri

7、cal, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue Th

8、e stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enab

9、les to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all

10、 new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Al

11、so known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from ea

12、rlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC La Commission Electrotechnique Internation

13、ale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est constamment revu. Veuillez vous assurer que vou

14、s possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications techniques, Rapports techniques et autres documents

15、de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle donne aussi des informations sur les projets e

16、t les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email. Electropedia - www.electropedia.org Le pre

17、mier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 15 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IEV) en ligne. Glossaire IEC - std.iec.ch/glo

18、ssary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lIEC. Service Clients - webstore.iec.ch/csc S

19、i vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 62917 Edition 1.0 2016-10 INTERNATIONAL STANDARD NORME INTERNATIONALE Railway applications Fixed installations Electric traction Copper and copper alloy grooved contact wires

20、 Applications ferroviaires Installations fixes Traction lectrique Fils de contact rainurs en cuivre et en cuivre alli INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE ICS 45.060.01 ISBN 978-2-8322-3625-3 Registered trademark of the International Electrotechnical C

21、ommission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer que vous avez obtenu cette publication via un distributeur agr. colour inside 2 IEC 62917:2016 IEC 2016 CONTE

22、NTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Characteristics of contact wires . 8 4.1 Contact wire designation system . 8 4.2 Material designation 8 4.3 Appearance and condition . 8 4.4 Identification . 9 4.4.1 General requirements 9 4.4.2 Normal and high strength

23、copper (Cu-ETP, Cu-FRHC, Cu-HCP, Cu-OF) . 9 4.4.3 Copper-silver alloy (CuAg 0,1) . 9 4.4.4 Copper-cadmium alloy (CuCd 0,7, CuCd 1,0) 9 4.4.5 Copper-magnesium alloy (CuMg 0,2, CuMg 0,5) 10 4.4.6 Copper-tin alloy (CuSn 0,2) . 10 4.5 Configuration, profile and cross-sections 11 4.5.1 Clamping grooves 1

24、1 4.5.2 Cross-sectional areas 11 4.5.3 Profiles 11 4.5.4 Configurations . 11 4.6 Electrical properties 12 4.6.1 Resistivity 12 4.6.2 Resistance per kilometre . 12 4.7 Mechanical properties . 13 4.7.1 Tensile strength and percentage elongation after fracture 13 4.7.2 Additional requirements . 13 4.7.

25、3 Microwaves on longitudinal axis of contact wire . 13 4.8 Jointing feed stock 14 5 Testing of contact wires . 17 5.1 Material composition . 17 5.2 Appearance and condition . 17 5.3 Profiles and dimensions 17 5.4 Electrical properties 17 5.5 Mechanical properties . 17 5.5.1 Breaking load and percent

26、age elongation after fracture . 17 5.5.2 Reverse bend test . 18 5.5.3 Torsional strength test . 20 5.5.4 Winding property test . 20 5.5.5 Microwaves on longitudinal axis of the contact wire . 20 5.6 Mass per unit length . 21 5.7 Jointing of wire . 21 5.8 Integrity of contact wire . 21 5.9 Type of te

27、sts . 21 6 Ordering and delivery conditions . 22 6.1 Conditions and specification of the order 22 6.2 Packaging . 23 IEC 62917:2016 IEC 2016 3 6.3 Tolerance on contact wire length 23 6.4 Contact wire drum markings 23 7 Verification of compliance 23 7.1 Certification of compliance and test results .

28、23 7.2 Selection of samples and tests by supplier 23 7.3 Inspection by purchaser 24 Annex A (normative) Standardised configurations 25 Annex B (informative) Common alloy compositions and designations . 28 Annex C (informative) Physical properties 29 C.1 Electrical resistance per kilometre. 29 C.2 Mi

29、nimum breaking load . 30 C.3 Tolerance on diameter and cross-sectional area . 30 C.4 Mass per kilometre of the contact wire 30 C.5 Contact wire coefficients . 31 C.6 Calculating the cross-sectional area of contact wire 32 Annex D (informative) A-deviations 33 Annex E (informative) Special national c

30、onditions 34 E.1 General . 34 E.2 United Kingdom 34 E.3 Austria 34 E.4 Japan 36 E.5 Russia 40 E.6 China 44 Bibliography 48 Figure 1 Description of identification groove 9 Figure 2 Two identification grooves (CuAg) 10 Figure 3 One identification groove (CuCd) . 10 Figure 4 Three identification groove

31、s (CuMg) . 10 Figure 5 One offset identification groove (CuSn) 11 Figure 6 Clamping groove types A and B . 11 Figure 7 Limit on microwaves in the contact wire . 14 Figure 8 Reverse bend test Test rig 19 Figure 9 Reverse bend test Method. 20 Figure A.1 Contact wire shape AC . 25 Figure A.2 Contact wi

32、re shape BC . 26 Figure A.3 Contact wire shape BF 27 Figure E.1 Clamping groove type in Austria . 35 Figure E.2 Configurations of CF-100 and CF-120 contact wire in Austria . 36 Figure E.3 Identification grooves of contact wires in Japan (Copper-tin 0,3 % alloy) . 37 Figure E.4 Clamping grooves of co

33、ntact wires in Japan . 37 Figure E.5 Configurations of contact wires in Japan . 38 Figure E.6 Identification grooves of contact wires of type M (a), type M* (b), type Br2 (c), type Br1 (d) in Russia . 41 Figure E.7 Clamping grooves and configuration of contact wire circular profile in Russia 42 4 IE

34、C 62917:2016 IEC 2016 Figure E.8 Clamping grooves and configuration of contact wire oval profile in Russia . 43 Figure E.9 Cross-section and identification grooves in China . 45 Table 1 Configurations and cross-sections for types A and B . 12 Table 2 Maximum resistivity and minimum conductivity 12 T

35、able 3 Maximum resistance per kilometre depending on material . 13 Table 4 Tensile strength and percentage elongation after fracture . 15 Table 5 Minimum breaking loads depending on material and cross-section 16 Table 6 Contact wire tests 22 Table 7 Guide for the selection of samples 24 Table A.1 Di

36、mensions for contact wire shape AC . 25 Table A.2 Dimensions for contact wire shape BC . 26 Table A.3 Dimensions for contact wire shape BF . 27 Table B.1 Some possible material compositions and designations . 28 Table C.1 Maximum electrical resistance per kilometre depending on conductivity and nomi

37、nal cross-section (examples). 29 Table C.2 Minimum breaking loads depending on tensile strength and nominal cross-section (examples) . 30 Table C.3 Contact wire mass . 31 Table E.1 Dimensions of identification grooves in Japan 37 Table E.2 Dimensions of clamping grooves in Japan 38 Table E.3 Designa

38、tions of contact wires in Japan 38 Table E.4 Dimensions of contact wires in Japan 39 Table E.5 Mechanical properties of contact wires in Japan 39 Table E.6 Mass of contact wires in Japan 40 Table E.7 Dimensions and mass per unit length of contact wires in Russia 43 Table E.8 Mechanical and electrica

39、l properties for contact wires of type M in Russia 44 Table E.9 Mechanical and electrical properties for contact wires of types Br1, Br2 in Russia 44 Table E.10 Gauge, dimensions, angle and referenced mass per unit length in China . 45 Table E.11 Designations of contact wires in China . 46 Table E.1

40、2 Mechanical properties of contact wires in China . 46 IEC 62917:2016 IEC 2016 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RAILWAY APPLICATIONS FIXED INSTALLATIONS ELECTRIC TRACTION COPPER AND COPPER ALLOY GROOVED CONTACT WIRES FOREWORD 1) The International Electrotechnical Commission (IEC) is a w

41、orldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to othe

42、r activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the s

43、ubject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions

44、 determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National

45、Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in

46、which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publ

47、ication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is

48、 not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its tec

49、hnical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to