IEC 63044-1-2017 Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) - Part 1 General requirements《家用和建筑电子系统(HBES)以及建筑自动控制系统(BACS) 第1部分 通用要求》.pdf

1、 IEC 63044-1 Edition 1.0 2017-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Part 1: General requirements Systmes Electroniques pour les Foyers Domestiques et les Btiments (HBES) et Systmes de Gestion Tech

2、nique du Btiment (SGTB) Partie 1: Exigences gnrales IEC 63044-1:2017-01(en-fr) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2017 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publication may be reproduced or utilized in any form or by any means, elect

3、ronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an enquiry about obtaining additional rights to this publication, please c

4、ontact the address below or your local IEC member National Committee for further information. Droits de reproduction rservs. Sauf indication contraire, aucune partie de cette publication ne peut tre reproduite ni utilise sous quelque forme que ce soit et par aucun procd, lectronique ou mcanique, y c

5、ompris la photocopie et les microfilms, sans laccord crit de lIEC ou du Comit national de lIEC du pays du demandeur. Si vous avez des questions sur le copyright de lIEC ou si vous dsirez obtenir des droits supplmentaires sur cette publication, utilisez les coordonnes ci-aprs ou contactez le Comit na

6、tional de lIEC de votre pays de rsidence. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch About the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publis

7、hes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. I

8、EC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - ww

9、w.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on projects, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new I

10、EC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading online dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equi

11、valent terms in 16 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical terminology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 200

12、2. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedback on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. A propos de lIEC

13、 La Commission Electrotechnique Internationale (IEC) est la premire organisation mondiale qui labore et publie des Normes internationales pour tout ce qui a trait llectricit, llectronique et aux technologies apparentes. A propos des publications IEC Le contenu technique des publications IEC est cons

14、tamment revu. Veuillez vous assurer que vous possdez ldition la plus rcente, un corrigendum ou amendement peut avoir t publi. Catalogue IEC - webstore.iec.ch/catalogue Application autonome pour consulter tous les renseignements bibliographiques sur les Normes internationales, Spcifications technique

15、s, Rapports techniques et autres documents de lIEC. Disponible pour PC, Mac OS, tablettes Android et iPad. Recherche de publications IEC - www.iec.ch/searchpub La recherche avance permet de trouver des publications IEC en utilisant diffrents critres (numro de rfrence, texte, comit dtudes,). Elle don

16、ne aussi des informations sur les projets et les publications remplaces ou retires. IEC Just Published - webstore.iec.ch/justpublished Restez inform sur les nouvelles publications IEC. Just Published dtaille les nouvelles publications parues. Disponible en ligne et aussi une fois par mois par email.

17、 Electropedia - www.electropedia.org Le premier dictionnaire en ligne de termes lectroniques et lectriques. Il contient 20 000 termes et dfinitions en anglais et en franais, ainsi que les termes quivalents dans 16 langues additionnelles. Egalement appel Vocabulaire Electrotechnique International (IE

18、V) en ligne. Glossaire IEC - std.iec.ch/glossary 65 000 entres terminologiques lectrotechniques, en anglais et en franais, extraites des articles Termes et Dfinitions des publications IEC parues depuis 2002. Plus certaines entres antrieures extraites des publications des CE 37, 77, 86 et CISPR de lI

19、EC. Service Clients - webstore.iec.ch/csc Si vous dsirez nous donner des commentaires sur cette publication ou si vous avez des questions contactez-nous: csciec.ch. IEC 63044-1 Edition 1.0 2017-01 INTERNATIONAL STANDARD NORME INTERNATIONALE Home and Building Electronic Systems (HBES) and Building Au

20、tomation and Control Systems (BACS) Part 1: General requirements Systmes Electroniques pour les Foyers Domestiques et les Btiments (HBES) et Systmes de Gestion Technique du Btiment (SGTB) Partie 1: Exigences gnrales INTERNATIONAL ELECTROTECHNICAL COMMISSION COMMISSION ELECTROTECHNIQUE INTERNATIONALE

21、 ICS 29.120.01; 29.120.99 ISBN 978-2-8322-3874-5 Registered trademark of the International Electrotechnical Commission Marque dpose de la Commission Electrotechnique Internationale Warning! Make sure that you obtained this publication from an authorized distributor. Attention! Veuillez vous assurer

22、que vous avez obtenu cette publication via un distributeur agr. 2 IEC 63044-1:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms, definitions and abbreviated terms 5 3.1 Terms and definitions 5 3.2 Abbreviated terms . 6 4 General requirements 6 5 Standardization structure

23、 . 7 5.1 Part 2: Environmental conditions . 7 5.2 Part 3: Electrical safety requirements 7 5.3 Part 4: Functional safety . 7 5.4 Part 5: EMC requirements . 7 5.4.1 Overview . 7 5.4.2 Part 5-1: EMC requirements, conditions and test set-up 7 5.4.3 Part 5-2: EMC requirements for HBES/BACS used in resid

24、ential, commercial and light-industrial environments . 7 5.4.4 Part 5-3: EMC requirements for HBES/BACS used in industrial environments . 8 5.5 Part 6: Planning and installation of HBES . 8 6 HBES/BACS applications and clusters overview 8 Bibliography 11 Table 1 Summary of the most relevant applicat

25、ion requirements 9 Table 2 Applications and clusters of services for HBES/BACS . 10 IEC 63044-1:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HOME AND BUILDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) Part 1: General requirements FOREWORD 1) The Inte

26、rnational Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and elec

27、tronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committe

28、es; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for S

29、tandardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee ha

30、s representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accura

31、te, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional

32、 publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in som

33、e areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents i

34、ncluding individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or r

35、eliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of th

36、e elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 63044-1 has been prepared by IEC technical committee 23: Electrical accessories. A list of all parts in the IEC 63044 se

37、ries, published under the general title Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS), can be found on the IEC website. The text of this International Standard is based on the following documents: CDV Report on voting 23/734/CDV 23/746/RVC Full inform

38、ation on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. 4 IEC 63044-1:2017 IEC 2017 This document has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this doc

39、ument will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IEC 63044-1:2017 IEC 2017 5 HOME AND BUI

40、LDING ELECTRONIC SYSTEMS (HBES) AND BUILDING AUTOMATION AND CONTROL SYSTEMS (BACS) Part 1: General requirements 1 Scope This part of IEC 63044 applies to all Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) and specifies the general requirements for thes

41、e systems and products. This document is applicable (but not limited) to operator stations and other humansystem interface devices, devices for management functions, control devices, automation stations and application specific controllers, field devices and their interfaces, and cabling and interco

42、nnection of devices used within a dedicated HBES/BACS network. This document provides an overview of the IEC 63044 series. To enable integration of a wide spectrum of applications, the IEC 63044 series covers electrical safety, functional safety, environmental conditions, EMC requirements, and insta

43、llation and cabling rules and topologies. IEC 63044 is a series of product family standards 2 Normative references There are no normative references in this document. 3 Terms, definitions and abbreviated terms 3.1 Terms and definitions For the purposes of this document, the following terms and defin

44、itions apply. ISO and IEC maintain terminological databases for use in standardization at the following addresses: IEC Electropedia: available at http:/www.electropedia.org/ ISO Online browsing platform: available at http:/www.iso.org/obp 6 IEC 63044-1:2017 IEC 2017 3.1.1 home and building electroni

45、c/building automation and control products HBES/BACS products devices intended to be used for control, monitoring, operation or management of building services and/or home electronic systems which can interact via a dedicated HBES/BACS network 3.1.2 HBES/BACS network interconnection between HBES/BAC

46、S products used for communication Note 1 to entry: An HBES/BACS network can carry digital data as well as analogue signals. 3.1.3 HBES/BACS combination of HBES/BACS products (including their separate connected/detachable devices) linked together via one or more HBES/BACS networks Note 1 to entry: Ot

47、her names used such as “home control network“, “home control systems“, “home and building electronic systems“, “building systems“, “building automation system“, etc. describe types of HBES/BACS system. 3.1.4 interface shared boundary between two implementations of functions belonging to one or more

48、functional groupings 3.1.5 interoperability ability of devices to exchange commands via the higher layers resulting in meaningful actions Note 1 to entry: This includes aspects of the application domain, which by definition is beyond the OSI domain. 3.1.6 service benefit provided by an interapplicat

49、ion binding, or a local controller or remotely by a service provider to a consumer, and using entities and functions of applications that are available to it 3.1.7 cluster group of applications using the same type of HBES for approximately the same type of information to be exchanged driven by the same industrial and market sector 3.2 Abbreviated terms BACS Building Automation and Control Systems HBES