IEC TS 61836-2016 Solar photovoltaic energy systems - Terms definitions and symbols《太阳光伏能源系统.术语、定义和符号》.pdf

1、 IEC TS 61836 Edition 3.0 2016-12 TECHNICAL SPECIFICATION Solar photovoltaic energy systems Terms, definitions and symbols IEC TS 61836:2016-12(en) THIS PUBLICATION IS COPYRIGHT PROTECTED Copyright 2016 IEC, Geneva, Switzerland All rights reserved. Unless otherwise specified, no part of this publica

2、tion may be reproduced or utilized in any form or by any means, electronic or mechanical, including photocopying and microfilm, without permission in writing from either IEC or IECs member National Committee in the country of the requester. If you have any questions about IEC copyright or have an en

3、quiry about obtaining additional rights to this publication, please contact the address below or your local IEC member National Committee for further information. IEC Central Office Tel.: +41 22 919 02 11 3, rue de Varemb Fax: +41 22 919 03 00 CH-1211 Geneva 20 infoiec.ch Switzerland www.iec.ch Abou

4、t the IEC The International Electrotechnical Commission (IEC) is the leading global organization that prepares and publishes International Standards for all electrical, electronic and related technologies. About IEC publications The technical content of IEC publications is kept under constant review

5、 by the IEC. Please make sure that you have the latest edition, a corrigenda or an amendment might have been published. IEC Catalogue - webstore.iec.ch/catalogue The stand-alone application for consulting the entire bibliographical information on IEC International Standards, Technical Specifications

6、, Technical Reports and other documents. Available for PC, Mac OS, Android Tablets and iPad. IEC publications search - www.iec.ch/searchpub The advanced search enables to find IEC publications by a variety of criteria (reference number, text, technical committee,). It also gives information on proje

7、cts, replaced and withdrawn publications. IEC Just Published - webstore.iec.ch/justpublished Stay up to date on all new IEC publications. Just Published details all new publications released. Available online and also once a month by email. Electropedia - www.electropedia.org The worlds leading onli

8、ne dictionary of electronic and electrical terms containing 20 000 terms and definitions in English and French, with equivalent terms in 15 additional languages. Also known as the International Electrotechnical Vocabulary (IEV) online. IEC Glossary - std.iec.ch/glossary 65 000 electrotechnical termi

9、nology entries in English and French extracted from the Terms and Definitions clause of IEC publications issued since 2002. Some entries have been collected from earlier publications of IEC TC 37, 77, 86 and CISPR. IEC Customer Service Centre - webstore.iec.ch/csc If you wish to give us your feedbac

10、k on this publication or need further assistance, please contact the Customer Service Centre: csciec.ch. IEC TS 61836 Edition 3.0 2016-12 TECHNICAL SPECIFICATION Solar photovoltaic energy systems Terms, definitions and symbols INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 27.160 ISBN 978-2-8322-3762

11、-5 Registered trademark of the International Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC TS 61836:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms, definitions and symbols for s

12、olar photovoltaic energy systems . 6 3.1 Solar photovoltaic cells and modules 6 3.2 Solar photovoltaic systems components 19 3.3 Solar photovoltaic systems . 26 3.4 Solar photovoltaic system and component performance parameters . 38 3.5 Measurement devices . 58 3.6 Environmental parameters 60 3.7 Qu

13、ality and testing 69 3.8 Concentrator photovoltaics . 74 3.9 Project management . 76 3.10 Miscellaneous . 77 4 Acronyms and abbreviations 78 Bibliography 80 Index of terms and symbols 82 IEC TS 61836:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SOLAR PHOTOVOLTAIC ENERGY SYSTEMS TERMS,

14、 DEFINITIONS AND SYMBOLS FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerni

15、ng standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their p

16、reparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates clos

17、ely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the releva

18、nt subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the te

19、chnical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum e

20、xtent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provi

21、de conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or i

22、ts directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses

23、 arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attentio

24、n is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. The main task of IEC technical committees is to prepare International Standards. In exceptional circum

25、stances, a technical committee may propose the publication of a technical specification when the required support cannot be obtained for the publication of an International Standard, despite repeated efforts, or the subject is still under technical development or where, for any other reason, there i

26、s the future but no immediate possibility of an agreement on an International Standard. Technical specifications are subject to review within three years of publication to decide whether they can be transformed into International Standards. IEC 61836, which is a technical specification, has been pre

27、pared by IEC technical committee 82: Solar photovoltaic energy systems. This third edition cancels and replaces the second edition published in 2007. This edition constitutes a technical revision. 4 IEC TS 61836:2016 IEC 2016 The main technical change with regard to the previous edition consists of

28、adding / revising terms and definitions which have been discussed and agreed on during recent TC 82 WG 1 meetings, more particularly at the WG 1 meeting in Pretoria in 2015-11. The changes made in this new edition were kept limited deliberately, in order to avoid a long development process and get t

29、he newest terms and definitions published as promptly as possible, so that they can be used in the market place. The text of this technical specification is based on the following documents: Enquiry draft Report on voting 82/1117/DTS 82/1176/RVC Full information on the voting for the approval of thi

30、s technical specification can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on t

31、he IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be transformed into an International standard, reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual edition of this document may be issued at a l

32、ater date. IEC TS 61836:2016 IEC 2016 5 INTRODUCTION Following the development of solar photovoltaic (PV) technology, specific Standards have been prepared by IEC Technical Committee 82 since 1987. The terms and symbols used in the PV industry necessitate a systematisation in order to have a consoli

33、dated glossary for experts common understanding. This Glossary lists the terms and symbols that the PV industry commonly uses. It is a living document that will change as new terms and symbols are added. These have been harmonized with IEC 60050 and other IEC documents as far as possible. All defini

34、tions not included in this Technical Specification may be found elsewhere in other IEC documents. NOTE 1 The terms “PV“, “photovoltaic“ and “solar photovoltaic“ can be read and used interchangeably and without the need for stating each term to show that each is applicable and commonly used by the so

35、lar photovoltaic industry. NOTE 2 All terms beginning with “solar photovoltaic“ and “PV“ are listed under their respective “photovoltaic“ names. NOTE 3 The terms are listed alphabetically in ten categories. Under these categories, some of the terms have been grouped into families of related meaning

36、in order for the reader to readily see the differences between the terms. NOTE 4 This Glossary lists the precise usage of terms. Cross-references are provided to efficiently point the reader to the location of definitions. For example, a “solar photovoltaic array“ may also be referred to as “photovo

37、ltaic array“ or “array“ when the reference to it is particularly clear. The definition for this term, for example, occurs under the family heading of “photovoltaic“ in the “Solar photovoltaic systems“ section. NOTE 5 The colloquial use of “solar“ as the sole adjective of a noun is discouraged. For e

38、xample, though “solar array“ may be commonly used in non-technical conversations, the precise terms are “solar photovoltaic array“, “photovoltaic array“, and “array“. NOTE 6 Unless specifically noted otherwise, the terms “device“, “cell“, “module“, “array“, “sub-array“, “field“, “component“, “system

39、“, and “product“ refer to items incorporating a photovoltaic device. As a result, each of these terms can be understood to read as “PV device“, “PV cell“, “PV module“, etc., without having to re-state the term “PV“ each time, though now and then it is useful to re-state “PV“. NOTE 7 The numeric quan

40、tities described by many of the terms can be expressed in any convenient unit of time that the user may wish, such as day, month or year. NOTE 8 “W p “ is not a recommended unit for rated power. For example for a 50 W module, the correct terminology is “the rated power is 50 W“, and not “the power i

41、s 50 W p “. NOTE 9 The documents from which these terms originated are shown in square brackets . Some adaptations may have occurred. NOTE 10 This Glossary document recognises the related IEC co-ordinating Technical Committees: 1 Terminology 77 Electromagnetic compatibility 21 Secondary cells and ba

42、tteries 82 Solar photovoltaic energy systems 22 Power electronic systems and equipment 88 Wind energy generation systems 47 Semiconductor devices 105 Fuel cell technologies 64 Electrical installations and protection against electric shock 106 Methods for the assessment of electric, magnetic and elec

43、tromagnetic fields associated with human exposure 6 IEC TS 61836:2016 IEC 2016 SOLAR PHOTOVOLTAIC ENERGY SYSTEMS TERMS, DEFINITIONS AND SYMBOLS 1 Scope This Technical Specification deals with the terms, definitions and symbols from national and international solar photovoltaic standards and relevant

44、 documents used within the field of solar photovoltaic (PV) energy systems. It includes the terms, definitions and symbols compiled from the published IEC technical committee 82 standards. The focus of this document is “what do the words mean“ and not “under what conditions do the terms apply“. 2 No

45、rmative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any

46、 amendments) applies. IEC 60904-3:2016, Photovoltaic devices Part 3: Measurement principles for terrestrial photovoltaic (PV) solar devices with reference spectral irradiance data 3 Terms, definitions and symbols for solar photovoltaic energy systems 3.1 Solar photovoltaic cells and modules This sub

47、clause addresses vocabulary pertaining to photovoltaic materials, photovoltaic cells and photovoltaic modules. Other photovoltaic components are described in 3.2. Photovoltaic systems are described in 3.3. 3.1.1 amorphous photovoltaic material solid-state material in a semi-stable condition with no

48、long-range order in the structural arrangement of the atoms 3.1.2 amorphous silicon SEE: “silicon/amorphous“, 3.1.67.1 3.1.3 anti-reflective coating layer formed on the surface of a PV cell to reduce reflective loss 3.1.4 Area 3.1.4.1 active cell area part of the total cell area designed to receive

49、solar radiation for creating the photovoltaic effect Note 1 to entry: Active cell area equals the total cell area minus the area contribution of the metallisation lines if any. IEC TS 61836:2016 IEC 2016 7 3.1.4.2 active module area sum of total cell areas of all the cells in the module 3.1.4.3 cell aperture area area that is smaller than the total cell area and bounded by an opaque mask 3.1.4.4 module aperture area area that is smaller than the total module area and bounded by an opaque mask or frame 3.1